Publication List

Total Publication: 481

  • Shamim Rayhan, A N M Mominul Islam Mukut and Nurun Nabi; A Comprehensive Review of the Production of Biodiesel from Fish Waste – Challenges and Opportunities; Renewable and Sustainable Energy Reviews; 2026-05-13; Impact Factor (IF): 16.3; Type: Journal; Area: bio waste

  • Md. Hamidur Rahman and A N M Mominul Islam Mukut; A Review on Carbon-Based and Metal-Based Anode Materials of Microbial Fuel Cells; Energy Science and Engineering; 2026-05-08; Impact Factor (IF): 3.4; Type: Journal; Area: Fuel Cell Link: Click Here

  • Osman Ali, Mohammad Zoynal Abedin; Climate-driven rainfall forecasting for small-scale hydropower potential in Dhaka using SARIMAX modelling; International Journal of Sustainable Energy and Environmental Research, 15(1) (2026) 15-25.; 2026-04-30; Impact Factor (IF): 1.167; Type: Journal; Area: Thermal Engineering

  • Nurul Hoda Sanid, Mohammad Zoynal Abedin and Samsul Islam; Exergetic Analysis of Boiler Feed Water System with Deaerator in Steam Power Plant; International Journal of Engineering Materials and Manufacture (2026) 11(2) 40-48; 2026-04-30; Impact Factor (IF): 1.167; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Samsul Islam, Md. Jakir Hossen, Md. Ashikur Rahman, Mohammad Zoynal Abedin, Jahirul Islam, Nurul Hoda Sanid, Zahid Ahsan, Amanullah Moral, Md. Saiful Islam, Al-Amin, Md. Tasdid Hasan, Md Sajedul Islam, Md. Erfanul Hasan Sakib, Md. Abdulla Al Korais, Abdur Rahman Muin, Md. Mobashir Hosain, Md. Fardouse Alam, Mohammad Monirul Kabir Mridha, Md. Hossain Ali, Md. Rezaul Karim Sikder, Shariful Islam, Md Ashraful Islam Bhuiyan; Radioactive Waste Management and Safety Frameworks for VVER-1200 Reactors at the Rooppur Nuclear Power Plant: A Comprehensive Review; American Journal of Energy Engineering, 2026, Volume 14, Issue 2, pp. 45-55; 2026-04-10; Impact Factor (IF): 0.61; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Md Osman Ali, Mostafizur Rahman, Md Junayed Ali, Md Ramjan Ali, Kameliya Azad, Md Akibul Islam, Saifullah Mahmud, Mosiur Rahaman, Ekramul Islam, Ashif Imdad; Recent advances in thermomechanical properties of PLA-based biopolymer composites for biomedical applications; Elsevier, Next Materials, Volume:11 Page:101646; 2026-04-01; Impact Factor (IF): 1.9; Type: Journal; Area: Biomedical Materials Link: Click Here

  • Md. Osman Ali, Ekramul Islam, Mohammad Zoynal Abedin, Mahmudul Hasan, Md. Ramjan Ali, Md Junayed Ali, Saifullah Mahmud; Status, pathways and prospects of renewable energy generation from waste streams in Bangladesh: A case study in the major cities; Energy Reports, Volume 15, June 2026, 109226; 2026-03-31; Impact Factor (IF): 5.1; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Al-Amin, Samsul Islam, Mohammad Zoynal Abedin*, Jahirul Islam and Md. Zihan Babu; Performance Analysis of Annular Fins in Cylindrical Pipe Under Various Convection Modes at Different Inclinations; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Al-Amin, Md Sajedul Islam, Md. Noor Uddin, Saddam Hossen and Mohammad Zoynal Abedin*; Investigation of Thermal Efficiency and Fouling Dynamics of Enhanced Tubes in Water-Cooled Condenser; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Zahid Ahsan*, Samsul Islam, Md Wahiduzzaman Shanto, Md Shamim Rayhan, Arif Md Shahed Iqubal, Subrata Saha, A.N.M. Mominul Islam Mukut and Mohammad Zoynal Abedin; Experimental Analysis of Exhaust Gas Opacity and Absorption in Vehicles Equipped and Non-Equipped Exhaust Gas Recirculation (EGR) System; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Md. Saiful Islam, Mohammad Zoynal Abedin*, Samsul Islam, Shohag Mia, Hafez Ahmed and Md. Erfanul Hasan Sakib; Simulation-Based Optimization of Egress Plan Under Commercial Fire Incidents in Bangladesh; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Chowdhury*, Mohammad Zoynal Abedin and Md. Saiful Islam; Advances in CFD-Based Optimization and Baffle Design Strategies for Shell and Tube Heat Exchangers: A Comprehensive Review; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Samsul Islam, Mohammad Zoynal Abedin*, Shohag Mia, Hafez Ahmed, Md. Saiful Islam, Nurul Hoda Sanid and Saddam Hossen; Evaluation and Mitigation of Deadly Fire Incidents in the Commercial Sector Using AI: Bangladesh Perspective; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Md. Abdulla Al Korais, Jubaer Ali, Hasan Mohammad Mostofa Afroz, Samsul Islam, Md. Zakir Hosain, Mamun Ur Rashid and Mohammad Zoynal Abedin; Experimental Investigation on Hydrogen Fuel Production Efficiency Using an Alkaline Water Electrolyzer with Optimized Electrode Configurations; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Jahirul Islam*, Md. Zihan Babu, Saifullah Mahmud, Mohammad Rashed Mia, Samsul Islam, Mohammad Zoynal Abedin, Selim Reza, Abdul Ahad, Tasnim Alam Sayedi and Biplov Kumar Roy; Numerical Analysis of Newtonian and non-Newtonian Blood Flow Behavior in Veins Using Computational Fluid Dynamics; 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Thermal Engineering

  • Md. Akhtaruzzaman Hero, Md. Rajib Hamam, Mizanur Rahman, Md. Murad Ali, Md. Raduanul Islam Mridul*, Mohammad Zoynal Abedin; Influence Of Solution Treatment, Ageing, and Overageing on the Mechanical Properties and Microstructure of Cast AL-MG-SI Alloy (AA6061); 3rd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE - 2026) 30 - 31 January 2026, DUET, Gazipur, Bangladesh; 2026-01-30; Type: Conference; Area: Engineering

  • Md Osman Ali, Ekramul Islam, Mohammad Zoynal Abedin, Mahmudul Hasan, Md Ramjan Ali, Md Junayed Ali, Saifullah Mahmud; Status, pathways and prospects of renewable energy generation from waste streams in Bangladesh: A case study in the major cities; Energy Reports; 2026-01-06; Impact Factor (IF): 5.1; Type: Journal; Area: Energy

  • Md Osman Ali, Mostafizur Rahman, Md Junayed Ali, Md Ramjan Ali, Kameliya Azad, Md Akibul Islam, Saifullah Mahmud, Mosiur Rahaman, Ekramul Islam, Ashif Imdad; Recent advances in thermomechanical properties of PLA-based biopolymer composites for biomedical applications; Next Materials; 2026-01-04; Type: Journal; Area: Biomedical

  • Md Mahadi Hasan, Md Zillur Rahman, Raad Shahamat Ahmed, Md Fahim Tazwar Hossain, Mohammad Washim Dewan; Development and characterization of jute-pineapple leaf fiber reinforced PLA hybrid composites: Effect of chemical treatments on mechanical properties and environmental durability; Journal of Materials Research and Technology, Volume 40, January–February 2026, Pages 4063-4076; 2025-11-28; Impact Factor (IF): 6.6; Type: Journal; Area: Materials Link: Click Here

  • MM Hossain, MR Ahasan, R Wang; Exploring the versatile roles of microwave energy in catalyst synthesis, treatment, and catalytic performance; Fuel; 2025-11-15; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, Microwave

  • MM Hossain, R Wang; Pre-Ion Plasma Treatment to Enhance Catalyst Surface Reactivity in Plasma-Assisted Dry Methane Reforming; 2025 AIChE Annual Meeting; 2025-11-05; Impact Factor (IF): Unknown; Type: Conference; Area: Plasma Catalysis

  • MM Hossain, R Wang; Oxygen Vacancy Dynamics in CeO2 Supported Bimetallic Catalysts: Insights from O2 Pulse Titration and in-Situ Spectroscopy for Dry Reforming of Methane; 2025 AIChE Annual Meeting; 2025-11-05; Impact Factor (IF): Unknown; Type: Conference; Area: Plasma Catalysis

  • Md. Sahriar Hasib Shawon, Mohammad Zoynal Abedin; Recent Advances in Fouling Mitigation and Dynamic Modeling in Industrial Heat Exchangers: From Nanocomposite Surfaces to Full-Cycle Optimization; IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), Volume 22, Issue 5 Ser. 3 (Sept - Oct 2025), PP 17-20; 2025-10-24; Impact Factor (IF): 0.349; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Md Ar Rafee Bin Akram, Samsul Islam, Md Mushfik Ul Islam, Md ShohidulIslam Masum and Mohammad Zoynal Abedin; An Experimental Investigation of Mechanical Properties of uPVC Pipes Manufactured in Bangladesh; International Journal of Engineering Materials and Manufacture, 10(3) 85-94; 2025-07-31; Impact Factor (IF): 0.349; Type: Journal; Area: Engineering Link: Click Here

  • MM Hossain, R Wang; Tracking structural and surface transformations in RuOx/CeO2 catalysts under plasma-assisted dry reforming of methane; Chemical Engineering Journal; 2025-07-15; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, DRM

  • MM Hossain, R Wang; Plasma-Assisted Dry Reforming of Methane Using CeO2 Nanorods Supported Single Atom Bimetallic Ni-Ru Catalysts; The 29th North American Catalysis Society Meeting; 2025-06-09; Impact Factor (IF): Unknown; Type: Conference; Area: Plasma Catalysis

  • MM Hossain, R Wang; Effect of Plasma Power on Intermediate Species and Reaction Temperature in the Presence and Absence of Catalysts for Dry Reforming of Methane Application; The 29th North American Catalysis Society Meeting; 2025-06-09; Impact Factor (IF): Unknown; Type: Conference; Area: Plasma Catalysis

  • MM Hossain, R Wang; Impact of Pre-Ion Plasma Treatment on Catalyst Efficacy in Plasma-Assisted Dry Reforming of Methane; The 29th North American Catalysis Society Meeting; 2025-06-09; Impact Factor (IF): Unknown; Type: Conference; Area: Plasma Catalysis

  • A Mirtaleb, R Wang, MM Hossain; Catalytic SnSe2@ Mxene Composite Separators for Superior Polysulfide Regulation in Lithium–Sulfur Batteries; The 29th North American Catalysis Society Meeting; 2025-06-09; Impact Factor (IF): Unknown; Type: Conference; Area: Catalysis, Energy Storage

  • Amal Chandra Kar and Mohammad Zoynal Abedin; Optimization of Indoor Airflow Distribution in Variable Refrigerant Flow Air Conditioning System: A Review; International Journal of Engineering Materials and Manufacture, 10(2) 26-34; 2025-04-30; Impact Factor (IF): 2.7; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Tofael Ahmed, Hasan Mohammad Mostofa Afroz; Feasibility Study of District Cooling System Through a Simplified Model Experimentation; 1st IUT International Conference on Core Engineering and Technology, Paper ID- 107; 2025-04-25; Type: Conference; Area: Refrigeration and Air conditioning

  • M. M. Rahman, K. Kariya, A. Miyara; An Experimental Study of Heat Transfer During Condensation of Refrigerant R134a Inside Horizontal Multiport Minichannel; The 8th Asian Conference on Refrigeration and Air Conditioning, May 2016, Taipei, Taiwan; 2025-04-13; Type: Conference; Area: Thermal Engineering

  • Md Hasan Tarek Mondal, Md Aziz Raihan, Md Golzar Hosen, Md Al Hasan, Hasan Mohammad Mostofa Afroz(Corresponding Author); Development and Performance Evaluation of Ultrasound Assisted Microwave Paddy Dryer; Applied Food Research, Volume 5, Issue 1, June 2025, 100862; 2025-03-28; Impact Factor (IF): 4.5; Type: Journal; Area: Energy and Drying Link: Click Here

  • Md. Abdullah, Mohammad Zoynal Abedin, Saifur Rahman Bakaul; A Review on Synthesis and Characterization of Composites Reinforced with Nanoparticles, Glass Fiber, and Jute Fiber for Aerospace Applications; Results in Surfaces and Interfaces; 2025-03-21; Impact Factor (IF): 2.7; Type: Journal; Area: Engineering Link: Click Here

  • Shamim Rayhan, A N M Mominul Islam Mukut; Experimental analysis of car drag reduction through contour bump application; International Journal of Vehicle Performance; 2025-02-04; Impact Factor (IF): 1.33; Type: Journal; Area: Aerodynamics

  • Md. Abdullah and Mohammad Zoynal Abedin; Computational assessment of winglet-induced variations in pressure coefficients on NACA 4418 aircraft wings; Advances in Mechanical Engineering, Sage Journals, 2025;17(1); 2025-01-20; Impact Factor (IF): 1.9; Type: Journal; Area: CFD Link: Click Here

  • K Sharmin, MS Rayhan, U Habiba, MW Dewan; Synthesis of PVC-PEG based Bio-Enhanced Scaffolds Modifying with SiO2; Hybrid Advances, Volume 8; 2025-01-17; Type: Journal; Area: Materials Link: Click Here

  • Shazzad Hossain, Mohammad Zoynal Abedin, Rotan Kumar Saha, Md Touhiduzzaman, Md Jakir Hossen; Optimization of cutting temperature and surface roughness in CNC turning of Ti-6Al-4V alloy using response surface methodology; Heliyon, Volume 11, Issue 1, 15 January 2025, e41051; 2025-01-15; Impact Factor (IF): 3.4; Type: Journal; Area: Engineering Link: Click Here

  • Md.Mamun, Nayeem Md. Lutful Huq, Shuvo Chandra Das, MD. Mesbah Uddin Saadi, Md. Mostafa Hossain Sunny, Md. Mahfuzul Islam, Shaon Debnath; RENEWABLE ENERGY IN BANGLADESH: CHALLENGES, SUSTAINABLE POWER GENERATION, AND FUTURE PROSPECTS; 8th International Conference on Mechanical, Industrial & Energy Engineering; 2024; 2025-01-04; Type: Conference; Area: Renewable Energy Link: Click Here

  • Md. Anowar Hossain, Ummey Rayhan, Md. Mamun, Anik Talukder, Fatema Tuz Zahra, Minhaz Hossain, Shuvo Chandra Das; DEVELOPMENT AND CHARACTERIZATION OF BIODIESEL: ANALYZING PROPERTIES THROUGH GC-MS AND FUEL ANALYZER; 8th International Conference on Mechanical, Industrial & Energy Engineering; 2025-01-02; Type: Conference; Area: Energy Engineering Link: Click Here

  • Md. Anowar Hossain, Md. Mamun, Md. Kawsarul Islam, Al-Amin, Md. Omer Faruk, Sabbir Hossen; EXPERIMENTAL STUDY ON THE INFLUENCE OF BAFFLES ON HEAT TRANSFER OF SHELL AND TUBE HEAT EXCHANGER; 8th International Conference on Mechanical, Industrial & Energy Engineering; 2025-01-02; Type: Conference; Area: Heat Transfer Link: Click Here

  • Al Amin, Rafiqul Islam Reja, Md. All Amin Sumon, Mohammad Zoynal Abedin; Performance Analysis of Annular Fins in Cylindrical Pipes: A Study on Heat Transfer and Fin Efficiency under Various Convection Modes; 8th International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE 2024), Faculty of Mechanical Engineering, Khulna University of Engineering & Technology, Khulna 9203, Bangladesh, 02-04 January 2025; 2025-01-02; Type: Conference; Area: Thermal Engineering

  • Md. Mamun, Nayeem Md. Lutful Huq, Md. Ubaidur Rahman, Md. Zakir Hossain, Md Rakib Hossain, Shuvo Chandra Das, Minhaz Hossain; Geothermal Energy Development in Bangladesh: A Sustainable Solution to Mitigate Climate Change Impacts; 7th IEOM Bangladesh Conference on Industrial Engineering and Operations Management; 2024-12-21; Type: Conference; Area: Renewable Energy Link: Click Here

  • Md. Saadbin Chowdhury, Mohammad Ali, Mohammad Zoynal Abedin and Asif kabir; Numerical Study on Heat Transfer Performance in Smooth Circular Pipes Using Al₂O₃ Nanofluids and Rectangular Ribs with Varying Aspect Ratios; 9th BSME International Conference on Thermal Engineering, 19-21 December 2024, BUET, Dhaka; 2024-12-20; Type: Conference; Area: Thermal Engineering

  • M. Akter, R. Farazi, M. Ali, T. C. Das, M. M. Rahman; Experimental Investigation of Syngas through the Pyrolysis of Biomass; 9th BSME International Conference on Thermal Engineering, 19-21 December 2024, Bangladesh; 2024-12-20; Type: Conference; Area: Energy

  • Md. All Amin Sumon, Md. Rajib Hamam, Ashif Imdad, Rafiqul Islam Reja, Md. Anowar Hossain, Mohammad Zoynal Abedin; CFD Analysis of The Impact of Baffles Configuration on Fluid Flow and Heat Transfer Performance in a Heat Exchanger; The 9th BSME International Conference on Thermal Engineering; 2024-12-19; Type: Conference; Area: Thermal Engineering Link: Click Here

  • Md. All Amin Sumon, Md. Rajib Hamam, Ashif Imdad, Rafiqul Islam Reja, Md. Anowar Hossain, Mohammad Zoynal Abedin; CFD Analysis of The Impact of Baffles Configuration on Fluid Flow and Heat Transfer Performance in a Heat Exchanger; 9th BSME International Conference on Thermal Engineering, 19-21 December 2024, BUET, Dhaka; 2024-12-19; Type: Conference; Area: Thermal Engineering

  • Md. Zahidul Sarkar , Dane Sargeant , Rishabh Sharma , Marko Knezevic , David T. Fullwood , Michael P. Miles; Springback behavior after air bending of pre-strained AA 6016-T4 sheets: Influence of dislocation density and backstress on model accuracy; Journal of Manufacturing Processes; 2024-12-12; Impact Factor (IF): 6.8; Type: Journal; Area: Crystal Plasticity

  • Dr. Md. Anowar Hossain, Md. Mamun, Shaon Debnath, Md. Kawsarul Islam, Anik Talukder; Enhancing Split Air Conditioner Efficiency Through Evaporative Cooling: Improving COP, Reducing Compressor Load, and Lowering Energy Costs; ICMIME 2024 – International Conference on Mechanical, Industrial and Materials Engineering; 2024-12-11; Type: Conference; Area: Heat Transfer

  • MR Ahasan, MM Hossain, R Wang; Dielectric Barrier Discharge Reactors for Plasma-Assisted CO2 and CH4 Conversion: A Comprehensive Review of Reactor Design, Performance, and Future Prospects; Energy Technology; 2024-12-06; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, CO2 Utilization

  • Asher Webb, Md. Zahidul Sarkar, Michael P. Miles, Marko Knezevic & David T. Fullwood; Development of Backstress Under Different Strain Paths in an Aluminum Alloy: Stress Dip Testing and Modeling; Metallurgical and Materials Transactions A; 2024-11-29; Impact Factor (IF): 2.5; Type: Journal; Area: Materials Innovations for Lightweighting

  • Tasruzzaman Babu, Arefin Kowser, A.N.M. Mominul Islam Mukut; Numerical investigation of wind turbine blade materials and airfoil profiles to extract maximum wind energy; International Journal for Simulation and Multidisciplinary Design Optimization; 2024-10-04; Impact Factor (IF): 1.33; Type: Journal; Area: Aerodynamics Link: Click Here

  • Rahat Mahmud Khan, Marcus S Dersch, Alison C Dunn, J Riley Edwards; Design and laboratory evaluation of spring washers as railway baseplate hold-down method to mitigate spike failures; Engineering Failure Analysis, Vol. 164, 108723; 2024-10-01; Impact Factor (IF): 5.7; Type: Journal; Area: Railway Engineering

  • MR Ahasan, MM Hossain, R Wang; Non-thermal plasma enabled catalytic dry reforming of methane over a ceria nanorod supported NiO catalyst: the role of Ru as a coke resistant active site; Journal of Materials Chemistry A; 2024-09-19; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, DRM

  • MM Hossain, MR Ahasan, R Wang; Influence of catalyst shape on plasma-assisted dry reforming of methane: A comparative study of Ni-CeO2 nano-cubes and nano-octahedra; Chemical Engineering Journal; 2024-09-15; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, DRM

  • Marcus S Dersch, Rahat Mahmud Khan; Railroad Spike Failure Mitigation: Investigation of Tie Plate Hold-Down Elements; Research Results, RR 24-11, United States. Department of Transportation. Federal Railroad Administration; 2024-09-01; Type: Magazine; Area: Railway Engineering

  • Nayeem Md. Lutful Huq, Islam Mohammed Mahbubul, Gazi Lotif, Md. Rabbul Ashrafi, Miah Himan; Development and Performance Analysis of a Low-Cost Redox Flow Battery; Processess; 2024-07-12; Impact Factor (IF): 2.8; Type: Journal; Area: Energy Engineering Link: Click Here

  • Md Mamun, Fatema Tuz Zahra, Md Kawsarul Islam, Nayeem Md Lutful Huq; A Review on Current Renewable Energy Development Prospects and Challenges in Bangladesh; BAUET Journal; Volume 4; Issue 2; 2024-06-29; Type: Journal; Area: Energy Engineering Link: Click Here

  • Md. Mamun, Fatema Tuz Zahra, Md. Kawsarul Islam, Dr. Nayeem Md. Lutful Huq; A Review of Asian Countries' Current Nuclear Energy Development Prospects and Challenges; 2nd International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE – 2024); 2024-05-31; Type: Conference; Area: Energy Engineering Link: Click Here

  • Md. Abdullah, Mohammad Zoynal Abedin; Assessment of Plastic Waste Management in Bangladesh: A Comprehensive Perspective on Sorting, Production, Separation, and Recycling; Results in Surfaces and Interfaces 15 (2024) 100221; 2024-04-24; Impact Factor (IF): 1.27; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Rahat Mahmud Khan, Marcus S Dersch, Alison C Dunn; Quantification of stress relaxation in a timber fastening system: a railway focused study; European Journal of Wood and Wood Products; 2024-04-22; Impact Factor (IF): 2.4; Type: Journal; Area: Railway Engineering

  • M S Uddin, Mohammad Zoynal Abedin and A B Rashid; Development process of composite polymer tiles with an antimicrobial agent using plastic wastes as raw materials; IOP Conf. Ser.: Mater. Sci. Eng. 1305 012020; 2024-04-19; Impact Factor (IF): 1.27; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Md. Sahaydul Islam , Md. Faruque Hossain , Md. Ramjan Ali , Mohammad Washim Dewan , Khurshida Sharmin; Performance analysis of lithium-ion battery with solid electrolyte membrane; Hybrid Advances; 2024-04-05; Type: Journal; Area: Membrane

  • Md. Wazihur Rahman, Md. Saadbin Chowdhury, Mohammad Zoynal Abedin; CFD Analysis of Coolant Flow Characteristics in Reactor Pressure Vessel: A Comprehensive Review; American Journal of Science, Engineering and Technology 2024; Vol. 9, No. 2, pp. 42-49; 2024-03-25; Impact Factor (IF): 1.50; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Saifullah Mahmud, Md Mostafizur Rahman, Hazera Khatun, Md Osman Ali, Md Ramjan Ali, Mosiur Rahaman, Sadia Islam, Yusuf Ali; Ceramic coating on Mg alloy for enhanced degradation resistance as implant material; Surface and Coatings Technology; 2024-03-15; Impact Factor (IF): 6.1; Type: Journal; Area: Biomedical Link: Click Here

  • Md. Abdullah, Mohammad Zoynal Abedin; Recent development of combined heat transfer performance for engine systems: A comprehensive review; Results in Surfaces and Interfaces 15 (2024) 100212; 2024-03-12; Impact Factor (IF): 1.27; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Hazera Khatun, Mostafizur Rahman, Saifullah Mahmud, Mosiur Rahaman, Osman Ali, Yusuf Ali, Sadia Islam; Synthesis and characterization of biocompatible hybrid coating on WE54 Mg alloy for implant applications; Results in Engineering; 2024-03-01; Impact Factor (IF): 7.9; Type: Journal; Area: Biomedical Link: Click Here

  • Md. Abdur Rahman Roni, Mohammad Zoynal Abedin, Samsul Islam, Md. Abdul Hannan Miah, Zahid Ahsan; Thermodynamic Analysis and Performance Improvement in Biomass Power Plant: A Comprehensive Review; American Journal of Mechanical and Industrial Engineering (AJMIE), 8(1) (2024) 1-14.; 2024-02-20; Impact Factor (IF): 2.789; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Saifullah Mahmud a , Md Mostafizur Rahman a , Hazera Khatun a , Md. Osman Ali a , Md. Ramjan Ali a , Mosiur Rahaman a , Sadia Islam b , Yusuf Ali a; Ceramic coating on Magnesium Alloy for Enhanced Degradation Resistance as Implant Material; Surface and Coatings Technology Volume 479, 15 March 2024, 130544; 2024-02-10; Impact Factor (IF): 6.5; Type: Journal; Area: Biomedical Engineering Link: Click Here

  • Hazera Khatun a , Mostafizur Rahman a,* , Saifullah Mahmud a , Mosiur Rahaman a , Osman Ali a , Yusuf Ali a; Synthesis and characterization of biocompatible hybrid coating on WE54 Mg alloy for implant applications; Results in Engineering, Volume 21, March 2024, 101784; 2024-01-11; Impact Factor (IF): 7.9; Type: Journal; Area: Biomedical Engineering Link: Click Here

  • Md. Sahaydul Islam , Md. Faruque Hossain , Md. Ramjan Ali , Mohammad Washim Dewan , Khurshida Sharmin; Performance analysis of lithium-ion battery with solid electrolyte membrane; Hybrid Advances; 2024-01-03; Impact Factor (IF): 3.9; Type: Journal; Area: Materials Science Link: Click Here

  • MM Hossain, MR Ahasan, X Ding, R Wang; Coke formation pathway under various reaction conditions during the production of syngas in a dielectric barrier discharge plasma environment using CeO2 nanorods supported Ni catalysts; Chemical Engineering Journal; 2024-01-01; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, Dry Reforming

  • MA Aziz, MIH Khan, HMM Afroz, MM Hossain, S Talukdar, MAA Masud; The development and performance evaluation of an alternative energy-based hybrid cold storage system; Journal of Cleaner Production; 2024-01-01; Impact Factor (IF): Unknown; Type: Journal; Area: Thermal Energy Storage

  • MA Aziz, Md Imran H Khan, Hasan MM Afroz, MM Hossain, Shaon Talukdar, MAA Masud; The development and performance evaluation of an alternative energy-based hybrid cold storage system; Journal of Cleaner Production, v- 434, p-140394; 2024-01-01; Impact Factor (IF): 9.8; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Md Ramjan Ali, Mohammad Asaduzzaman Chowdhury, Mohammad Shahin, Md Mostafizur Rahman, Md Osman Ali, Md Abdul Gafur; Multi-physical and anti-corrosion properties of graphene-reinforced epoxy nanocomposite coatings for industrial applications; Arabian Journal of Chemistry; 2024-01-01; Type: Journal; Area: Nanocoating

  • Md. Zulkarna-En, Md. Ashraful Islam*, Abdullah Al-Faruk, Md Rhyhanul Islam Pranto and A.N.M. Mominul Islam Mukut*; Numerical Analysis of Aerodynamic and Shock Wave Characteristics of Biconvex and Double-Wedge Shape Airfoils for Supersonic Flow; INTERNATIONAL JOURNAL OF AUTOMOTIVE & MECHANICAL ENGINEERING; 2023-12-28; Impact Factor (IF): 2; Type: Journal; Area: Aerodynamics

  • Md. Rezaul Karim Sikder and Mohammad Zoynal Abedin; Experimental investigation for reducing aerodynamic drag and fuel consumption in a passenger bus; International Journal of Mechanics of Solids 2023; 4(1): 25-32; 2023-12-01; Impact Factor (IF): 2.15; Type: Journal; Area: Aerodynamics

  • Md. Rezaul Karim Sikder and Mohammad Zoynal Abedin; Thermodynamic analysis and performance improvement in natural gas based power plant: A comprehensive review; International Journal of Mechanics of Solids 2023; 4(1): 33-44; 2023-12-01; Impact Factor (IF): 2.15; Type: Journal; Area: Engineering

  • Md Ramjan Ali, Mohammad Asaduzzaman Chowdhury, Md Mostafizur Rahman, Md Osman Ali, Saifullah Mahmud, Md Masud Rana, Biplov Kumar Roy; Performance enhancement of lithium-ion battery using modified LiMn2O4 cathode followed by ultrasonic-assisted electrochemically synthesized graphene; Results in Engineering; 2023-12-01; Type: Journal; Area: Lithium-ion battery

  • Md Ramjan Ali * , Mohammad Asaduzzaman Chowdhury, Md Mostafizur Rahman, Md Osman Ali, Saifullah Mahmud, Md Masud Rana, Biplov Kumar Roy; Performance enhancement of lithium-ion battery using modified LiMn2O4 cathode followed by ultrasonic-assisted electrochemically synthesized graphene; Results in Engineering; 2023-11-12; Impact Factor (IF): 5.0; Type: Journal; Area: Lithium-ion Battery Link: Click Here

  • Md Mostafizur Rahman, Md Osman Ali, Saifullah Mahmud, Md Masud Rana, Biplov Kumar Roy; Performance enhancement of lithium-ion battery using modified LiMn2O4 cathode followed by ultrasonic-assisted electrochemically synthesized graphene; Results in Engineering Volume Volume 20, December 2023, 101578; 2023-11-09; Impact Factor (IF): 7.9; Type: Journal; Area: Materials Engineering Link: Click Here

  • Md. Ramjan Ali, Mohammad Asaduzzaman Chowdhury, Shahin Mia, Mostafizur Rahman, Osman Ali, Abdul Gafur; Multi-physical and Anti-corrosion Properties of Graphene-reinforced Epoxy Nanocomposite Coatings for Industrial Applications; Arabian Journal of Chemistry, Available online 3 November 2023, 105424; 2023-11-03; Impact Factor (IF): 6.0; Type: Journal; Area: Nanocomposite Coating Link: Click Here

  • Md. Saiful Islam; Md. Ismail Tushar; M. Mahbubur Rahman; Md. Tanvir Siraj; Asif Kabir; Johirol Islam; A Comparative Scenario from Bangladeshi Industries on Engineering Parameters of Utility Machines; American Institute of Physics; 2023-11-02; Type: Conference; Area: Industry Application Link: Click Here

  • Md. Saiful Islam; Asif Kabir; Md. Tanvir Siraj; Md. Monir Hossain; M. Mahbubur Rahman; S. M. Faysal Ahmed; Experimental Study of Granular Materials Mixing in a Slowly Rotating Drum by Image Analysis; American Institute of Physics; 2023-11-02; Type: Conference; Area: Materials Link: Click Here

  • Md. Tanvir Siraj; Md. Mehedi Hasan; Md. Faiaz Al Islam; Sheikh Navid Shadab Jamil; Asif kabir; M. Mahbubur Rahman; Electrical Risk Domains in Ready-made Garments Industries of Bangladesh: Applying Entropy Method to Prioritize; American Institute of Physics; 2023-11-02; Type: Conference; Area: Industry Application Link: Click Here

  • Md Tanvir Siraj, Noor A Masqur Islam, Rafsan Ahmed, Md Faiaz Al Islam, Md Saiful Islam, Asif Kabir, Md Shariful Alam Emon; Selection of air compressor for pharmaceuticals: an approach with TOPSIS; AIP Conference Proceedings (Vol. 2825, No. 1); 2023-11-02; Type: Conference; Area: Optimization Link: Click Here

  • Dane Sargeant , Md. Zahidul Sarkar , Rishabh Sharma , Marko Knezevic, David T. Fullwood , Michael P. Miles; Effect of pre-strain on springback behavior after bending in AA 6016-T4: Experiments and crystal plasticity modeling; International Journal of Solids and Structures; 2023-11-01; Impact Factor (IF): 3.8; Type: Journal; Area: Crystal Plasticity

  • Md. Rezaul Karim Sikder and Mohammad Zoynal Abedin; Numerical Analysis for Reducing Fuel Consumption and CO2 Emissions in a Passenger Bus; American Journal of Mechanical and Industrial Engineering. Vol. 8, No. 4, 2023, pp. 99-109. doi: 10.11648/j.ajmie.20230804.12; 2023-10-31; Impact Factor (IF): 2.789; Type: Journal; Area: Fluid Mechanics and Turbulence

  • Md. Ramjan Ali a,* , Mohammad Asaduzzaman Chowdhury a , Mohammad Shahin a , Md. Mostafizur Rahman a , Md. Osman Ali a , Md. Abdul Gafur b; Multi-physical and anti-corrosion properties of graphene-reinforced epoxy nanocomposite coatings for industrial applications; Arabian Journal of Chemistry Volume 17, Issue 1, January 2024, 105424; 2023-10-31; Impact Factor (IF): 5.2; Type: Journal; Area: Materials Engineering Link: Click Here

  • Mohammad Asaduzzaman Chowdhury, Shamim Ahmed, Nayem Hossain, Md. Masud Rana, Hasanuzzaman Aoyon, Md. Ramjan Ali, Syed Rokibul Islam, Md. Jonayed Hossain, Deep Chowdhury; Enhancement of microbial fuel cell performance by introducing dosing materials in waste water to increase microorganism growth; Renewable Energy; Volume 219, Part 2; 2023-10-31; Impact Factor (IF): 8.7; Type: Journal; Area: Microbial fuel cell Link: Click Here

  • Md. Rezaul Karim Sikder and Mohammad Zoynal Abedin; Numerical Analysis of Drag Reduction Using Aerodynamic Designs in a Passenger Bus; American Journal of Mechanical and Industrial Engineering. Vol. 8, No. 4, 2023, pp. 90-98. doi: 10.11648/j.ajmie.20230804.11; 2023-10-12; Impact Factor (IF): 2.789; Type: Journal; Area: Fluid Mechanics and Turbulence

  • Kameliya Azad, Mohammad Asaduzzaman Chowdhury, Md Akibul Islam, Nayem Hossain, Sagar Kumer Nondy, Md Riad Ahmad, Md Masud Rana; Synthesis and characterization of titanium silver composite for dental applications; Elsevier, Volume: 13, Page: 100162; 2023-10-01; Impact Factor (IF): 4.4; Type: Journal; Area: Biomedical Materials Link: Click Here

  • Md Mostafizur Rahman Hazera Khatun Saifullah Mahmud Osman Ali Sadia Islam Mosiur Rahaman; Synthesis and Characterization of Ha/Pla Hybrid Coating on We54 Mg Alloy for Implant Applications; Results in Engineering; 2023-09-28; Type: Journal; Area: Hybrid Coating Link: Click Here

  • MR Ahasan, MM Hossain, Z Barlow, X Ding, R Wang; Low-Temperature Plasma-Assisted Catalytic Dry Reforming of Methane over CeO2 Nanorod-Supported NiO Catalysts in a Dielectric Barrier Discharge Reactor; ACS Applied Materials & Interfaces; 2023-09-13; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, DRM

  • Md Abdul Hannan Mia, Mohammad Zoynal Abedin, Md. Selim Hossain, Md. Ashraf Ali, Md. Masud Rana, Samsul Islam, Zahid Ahsan, Shariful Islam; Welding Defects Analysis with Various Alloys using TIG and MIG Welding Process; Transactions on Engineering and Computing Sciences - Vol. 11, No. 4 Publication Date: August 25, 2023; DOI:10.14738/tecs.114.15280.; 2023-08-25; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering Link: Click Here

  • Md. Wazihur Rahman, Mohammad Zoynal Abedin and Md. Saadbin Chowdhury; Efficiency analysis of nuclear power plants: A comprehensive review; World Journal of Advanced Research and Reviews, 2023, 19(02), 527–540; 2023-08-10; Impact Factor (IF): 2.789; Type: Journal; Area: Thermal Engineering

  • Matthew R. Standley , Md. Zahidul Sarkar , Ethan E. Costa , Marko Knezevic; Evolution of microstructure and strength during accumulative extrusion bonding of multilayered copper tubes; Materials Characterization; 2023-07-23; Impact Factor (IF): 5.5; Type: Journal; Area: Crystal Plasticity

  • Samsul Islam, Mohammad Zoynal Abedin, Zahid Ahsan, Md. Abdul Hannan Miah, Arif Md. Shahed Iqubal, Md. Mir Shakib Ahmed, Mustafizur Rahman, Mohammad Abdul Hye, Md. Rezaul Karim Sikder, Md. Osman Gani, Md. Aminul Islam, Md. Saik Mostar Kiron; Questionnaires with Answers on the Automotive Engine Fundamentals: Bangladesh Perspective; American Journal of Mechanical and Industrial Engineering (AJMIE), 8(3) (2023) 55-82.; 2023-07-17; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Samsul Islam, Mohammad Zoynal Abedin, Md. Abdul Hannan Miah, Zahid Ahsan, Arif Md. Shahed Iqubal, Mustafizur Rahman, Md. Mir Shakib Ahmed, Md. Aminul Islam, Md. Osman Gani, Mohammad Abdul Hye; Questionnaires with Answers on the Advanced Technology of Automotive Engine: Bangladesh Perspective; American Journal of Mechanical and Industrial Engineering. Volume 8, Issue 2, March 2023 , pp. 18-44. doi: 10.11648/j.ajmie.20230802.11; 2023-06-20; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering Link: Click Here

  • Md Abdul Karim, Sunusi Marwana Manladan, Hasan MM Afroz, Woosung Jin, Tejaswin Krishna, Changwook Ji, Duck Bong Kim, Yeong-Do Park; Critical effect of heat input on joint quality in resistance element welding of Al and steel; Journal of Manufacturing Processes,Volume 95, Pages 91-104; 2023-06-09; Impact Factor (IF): 6.1; Type: Journal; Area: Welding Link: Click Here

  • • Hazera Khatun, Mostafizur Rahman, Saifullah Mahmud, Md Osman Ali, Mahfuza Akter; Current advancements of hybrid coating on Mg alloys for medical applications; Results in Engineering; 2023-06-01; Type: Journal; Area: Biocoating

  • Hazera Khatun, Mostafizur Rahman, Saifullah Mahmud, Md Osman Ali, Mahfuza Akter; Current advancements of hybrid coating on Mg alloys for medical applications; Results in Engineering; 2023-06-01; Impact Factor (IF): 7.9; Type: Journal; Area: Biomedical

  • Hazera Khatun, Mostafizur Rahman * , Saifullah Mahmud, Md Osman Ali, Mahfuza Akter; Current advancements of hybrid coating on Mg alloys for medical applications; Results in Engineering Volume 18, June 2023, 101162; 2023-05-10; Impact Factor (IF): 7.9; Type: Journal; Area: Biomedical Engineering Link: Click Here

  • MR Ahasan, MM Hossain, X Ding, R Wang; Non-equilibrium plasma-assisted dry reforming of methane over shape-controlled CeO2 supported ruthenium catalysts; Journal of Materials Chemistry A; 2023-04-26; Impact Factor (IF): Unknown; Type: Journal; Area: Plasma Catalysis, CO2 Utilization

  • Saifullah Mahmud., Mostafizur Rahman*., Md. Kamruzzaman., Hazera Khatun., Md. Osman Ali., Md Monjurul Haque; Recent Developments in Hydroxyapatite Coating on Magnesium Alloys for Clinical Applications; Results in Engineering 17 (2023)101002; 2023-03-23; Impact Factor (IF): 7.9; Type: Journal; Area: Biomedical Engineering Link: Click Here

  • Md Ibrahim Khalil, Md Akibul Islam, Dezhong Tong, Mohammad Khalid Jawed, Bashir Khoda; Controlling Surface of Rods With Entrained Particle as Asperities; Journal of Micro-and Nano-Manufacturing, Volume: 11, Issue: 1; 2023-03-01; Impact Factor (IF): 1.0; Type: Journal; Area: Friction & Tribology Link: Click Here

  • • Saifullah Mahmud, Mostafizur Rahman, Md Kamruzzaman, Hazera Khatun, Md Osman Ali, Md Monjurul Haque; Recent developments in hydroxyapatite coating on magnesium alloys for clinical applications; Results in Engineering; 2023-03-01; Type: Journal; Area: Biocoating

  • Saifullah Mahmud, Mostafizur Rahman, Md Kamruzzaman, Hazera Khatun, Md Osman Ali, Md Monjurul Haque; Recent developments in hydroxyapatite coating on magnesium alloys for clinical applications; Results in Engineering; 2023-03-01; Impact Factor (IF): 7.9; Type: Journal; Area: Biomedical

  • S. Islam, Mohammad Zoynal Abedin; Graphene-based materials and their composites: a review; 17th Annual Paper Meet of Mechanical Engineering (APMME)-2023, Institution of Engineers, Bangladesh (IEB), 27-28 January 2023, Dhaka, Bangladesh; 2023-01-27; Type: Conference; Area: Engineering

  • S. Islam, M. A. H. Miah, Mohammad Zoynal Abedin; Nanomaterials and its applications: a review; 17th Annual Paper Meet of Mechanical Engineering (APMME)-2023, Institution of Engineers, Bangladesh (IEB), 27-28 January 2023, Dhaka, Bangladesh.; 2023-01-27; Type: Conference; Area: Engineering

  • M S. Rahman, Mohammad Zoynal Abedin; A Review on Nuclear Waste Management: Status, Challenges and Prospect of Bangladesh; Journal of Nuclear Energy Science & Power Generation Technology 12(1) (2023) 1000316; DOI: 10.4172/2325-9809.1000316; Published Online: 13 January 2023.; 2023-01-13; Impact Factor (IF): 2.789; Type: Journal; Area: Engineering

  • Biplov Kumar Roy, Md Ramjan Ali, Mohammad Asaduzzaman Chowdhury, Md Mostafizur Rahman, Md Osman Ali, Saifullah Mahmud, Md Masud Rana; Performance enhancement of lithium-ion battery using modified LiMn2O4 cathode followed by ultrasonic-assisted electrochemically synthesized graphene; Results in Engineering; 2023-01-12; Impact Factor (IF): 7.9; Type: Journal; Area: Energy

  • Md Sanuwar Uddin, Mohammad Zoynal Abedin and Mohammad Yeakub Ali; Fabrication and characterization of plastic tiles from plastic wastes in Bangladesh; AIP Conference Proceedings 2643, 050048 (2023); https://doi.org/10.1063/5.0110368; 2023-01-10; Impact Factor (IF): 2.75; Type: Journal; Area: Engineering Link: Click Here

  • DJ Huggett, MW Dewan, MA Wahab, TW Liao, AM Okeil; Control of principal processing parameters for “defect suppression model” for fixed pin friction-stir-welding (FSW); Elsevier; 2023-01-01; Type: Magazine; Area: Maanufacturing

  • Md Sanuwar Uddin, Mohammad Zoynal Abedin and Adib Bin Rashid; Development process of composite polymer tiles with an antimicrobial agent using plastic wastes as raw materials; 2nd International Conference on Mechanical Engineering and Applied Sciences, 2022 (ICMEAS 2022), Military Institute of Science and Technology (MIST), Dhaka, Bangladesh from 8-12 December 2022; 2022-12-08; Impact Factor (IF): 0.49; Type: Conference; Area: Engineering

  • Mostafizur Rahman, Mohammad Asaduzzaman Chowdhury, Md Shahin Mia, Md Ramjan Ali, Atiqur Rahman, Md Osman Ali, Saifullah Mahmud; Fabrication and characterization of hybrid coating on Mg–Zn–Ca Mg alloy for enhanced corrosion and degradation resistance as medical implant; Ceramics International; 2022-12-08; Impact Factor (IF): 5.6; Type: Journal; Area: Biomedical

  • D. K. Roy and Mohammad Zoynal Abedin; Potentiality of biodiesel and bioethanol production from feedstock in Bangladesh: A Review; Heliyon, 8(11) (November 1, 2022) e11213; 2022-11-01; Impact Factor (IF): 3.776; Type: Journal; Area: Engineering

  • Md. NurunNabi, Wisam K. Hussam, Hasan Mohammad Mostofa Afroz, Adib Bin Rashid, Jahidul Islam, A.N.M. Mominul Islam Mukut; Investigation of engine performance, combustion, and emissions using waste tire Oil-Diesel-Glycine max biodiesel blends in a diesel engine; Case Studies in Thermal Engineering; 2022-09-30; Impact Factor (IF): 6.26; Type: Journal; Area: Bio fuel Link: Click Here

  • M Abdullah, Mohammad Zoynal Abedin and Saddam Hossen; Effects of Fire Hazards Due to Leakage in Gas Circulation Lines in Bangladesh: A Comprehensive Review; International Journal of Engineering Materials and Manufacture 7(3) (2022) 95-103; 2022-09-29; Impact Factor (IF): 1.272; Type: Journal; Area: Thermal Engineering

  • Saifullah Mahmud, Mostafizur Rahman, Md Kamruzzaman, Md Osman Ali, Md Shariful Alam Emon, Hazera Khatun, Md Ramjan Ali; Recent advances in lithium ion battery materials for improved electrochemical performance: A review; Results in Engineering; Volume 15, September 2022, 100472; 2022-09-01; Type: Journal; Area: Energy Storage Link: Click Here

  • Saifullah Mahmud, Mostafizur Rahman, Md Kamruzzaman, Md Osman Ali, Md Shariful Alam Emon, Hazera Khatun, Md Ramjan Ali; Recent advances in lithium-ion battery materials for improved electrochemical performance: A review; Results in Engineering; 2022-09-01; Impact Factor (IF): 7.9; Type: Journal; Area: Energy

  • M. I. I. Apu and Mohammad Zoynal Abedin; Status and Effective Factors for Biogas Production in Bangladesh: A Comprehensive Review; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; 2022-08-22; Impact Factor (IF): 0.49; Type: Journal; Area: Engineering

  • D. Das and Mohammad Zoynal Abedin; A Review on Electrical and Electronics Waste Management and Generation in Bangladesh; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; 2022-08-22; Impact Factor (IF): 0.49; Type: Journal; Area: Engineering

  • K. Islam and Mohammad Zoynal Abedin; A Review on Sustainable Biofuel Production in Bangladesh: Status, Source, Challenge and Solution; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; 2022-08-22; Impact Factor (IF): 0.49; Type: Journal; Area: Engineering

  • M. Z. Hossain and Mohammad Zoynal Abedin; Microbial Fuel Cells: An Introductory Review on Recent Developments in Organic Substrate Use and Bacterial Electrode; Journal of Renewable Energy and Resources, Mantech Publications 7(2) 2022.; 2022-08-22; Impact Factor (IF): 0.49; Type: Journal; Area: Engineering

  • M. M. Rahaman and Mohammad Zoynal Abedin; A Review on Automobile Waste: Management, Recycling and Reusing Technology; Journal of Automotive Engineering & Technology, Mantech Publications 7(2) 2022.; 2022-08-22; Impact Factor (IF): 0.49; Type: Journal; Area: Engineering

  • M. J. Uddin and Mohammad Zoynal Abedin; A Review on Biomass Production: Status, Challenge and Prospect in South Asia; Journal of Modern Mechanical Systems and Machines, Mantech Publications 7(2) 2022.; 2022-08-22; Impact Factor (IF): 0.49; Type: Journal; Area: Engineering

  • Mohammad Zoynal Abedin and A. S. M. Luthful Karim; Waste to Energy Technologies for Municipal Solid Waste Management in Bangladesh: A Comprehensive Review; International Journal of Engineering Materials and Manufacture (2022) 7(3) 77-86; 2022-07-20; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Md Faiaz Al Islam, Navid Shadab, Rafsan Ahmed, Md. Tanvir Siraj, Mohammad Asif Kabir, Md. Akibul Islam; Fatigue failure analysis of Elevated rope under vibration; International Conference on Mechanical, Manufacturing and Process Engineering; 2022-06-29; Type: Conference; Area: Vibration Link: Click Here

  • Ahmed Farhan, Md. Tanvir Siraj, Aklima Ahmed Nishi, Sheikh Navid Shadab Jamil, Rafsan Ahmed, Asif Kabir and Saddam Hossen; Analyzing Failure Modes of Turbochargers for Engine-based Power Plants by Combined SWARA-FMEA Approach; International Conference on Mechanical, Manufacturing and Process Engineering, 2022; 2022-06-27; Type: Conference; Area: Mechanics & Materials Link: Click Here

  • Mohammad Zoynal Abedin, Md. Torikul Islam, Md. Asaduzzaman and Md. Ariful Islam; Design and fabrication of a wet dust collector for industrial applications; 1st International Conference on Mechanical, Manufacturing and Process Engineering 2022 (ICMMPE 2022) from 25-27 June 2022. [Abstract Accepted for Poster Presentation]; 2022-06-25; Type: Conference; Area: Engineering

  • Mohammad Zoynal Abedin, Md. Lingkon Hossen, Md. Moniruzzaman and Md. Razon Ali; Design and fabrication of an automatic incubator by indigenous means; 1st International Conference on Mechanical, Manufacturing and Process Engineering 2022 (ICMMPE 2022) from 25-27 June 2022. [Abstract Accepted for Poster Presentation]; 2022-06-25; Type: Conference; Area: Engineering

  • Mohammad Zoynal Abedin, Shuvo Kundu, Md. Saddam Hossen and Md. Mahmudul Hasan; Production of biofuel from plastic wastes by pyro technique process; 1st International Conference on Mechanical, Manufacturing and Process Engineering 2022 (ICMMPE 2022) from 25-27 June 2022. [Abstract Accepted for Poster Presentation]; 2022-06-25; Type: Conference; Area: Engineering

  • Md. Jahangir Alam, Md. Shariful Alam Emon, Biplov Kumar Roy; Study of Nanoscale Plasticity in Al - Ti Alloy Nanocube by Molecular Dynamics Simulation; International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE – 2022), DUET, Gazipur, Bangladesh.; 2022-06-25; Type: Conference; Area: Applied Mechanics

  • Saifullah Mahmud, Mostafizur Rahman, Md Kamruzzaman, Md Osman Ali, Md Shariful Alam Emon, Hazera Khatun, Md RamjanAli; Recent advances in lithium-ion battery materials for improved electrochemical performance: A review; Journal of Results in Engineering, 15 (2022) 100472; 2022-06-16; Impact Factor (IF): 4.06; Type: Journal; Area: Lithium Ion Battery Link: Click Here

  • • Saifullah Mahmud,, Mostafizur Rahman, Md Kamruzzaman, Md Osman Ali, Md Shariful Alam Emon, Hazera Khatun, and Md Ramjan Ali; Recent advances in lithium-ion battery materials for improved electrochemical performance: A review; Results in Engineering; 2022-06-16; Type: Journal; Area: Li-ion Battery

  • Md. Akibul Islam, Mohammad Asaduzzaman Chowdhury, Md.Arefin Kowser, Md.Osman Ali, KameliyaAzad, Md.Ramjan Ali; Enhancement of Thermal Properties of Kevlar 29 Coated by SiC and TiO2 Nanoparticles and their Binding Energy Analysis; Elsevier; Arabian Journal of Chemistry; Online published; 2022-05-18; Impact Factor (IF): 5.165; Type: Journal; Area: Polymeric coatings Link: Click Here

  • Md. Akibul Islam, Mohammad Asaduzzaman Chowdhury, Md.Arefin Kowser, Md.Osman Ali, KameliyaAzad, Md.Ramjan Ali; Enhancement of Thermal Properties of Kevlar 29 Coated by SiC and TiO2 Nanoparticles and their Binding Energy Analysis; Elsevier; Arabian Journal of Chemistry; Online published; 2022-05-18; Impact Factor (IF): 5.165; Type: Journal; Area: Elsevier; Arabian Journal of Chemistry; Online published

  • • Md Akibul Islam, Mohammad Asaduzzaman Chowdhury, Md Arefin Kowser, Md Osman Ali, Kameliya Azad, and Md Ramjan Ali; Enhancement of thermal properties of Kevlar 29 coated by SiC and TiO2 nanoparticles and their binding energy analysis; Arabian Journal of Chemistry; 2022-05-18; Impact Factor (IF): 6.2; Type: Journal; Area: Coating

  • • Mostafizur Rahman, Mohammad Asaduzzaman Chowdhury, Md Shahin Mia, Md Ramjan Ali, Atiqur Rahman, Md Osman Ali, and Saifullah Mahmud; Fabrication and characterization of hybrid coating on Mg–Zn–Ca Mg alloy for enhanced corrosion and degradation resistance as medical implant; Ceramics International; 2022-05-15; Type: Journal; Area: Hybrid Coating

  • Mostafizur Rahman * , Mohammad Asaduzzaman Chowdhury, Md. Shahin Mia, Md. Ramjan Ali, Atiqur Rahman, Md. Osman Ali, Saifullah Mahmud; Fabrication and characterization of hybrid coating on Mg–Zn–Ca Mg alloy for enhanced corrosion and degradation resistance as medical implant; Ceramics International; Elsevier; 2022-05-05; Impact Factor (IF): 4.527; Type: Journal; Area: Hybrid Coating Link: Click Here

  • M. Paul, S. Islam, M. A. H. Mia and Mohammad Zoynal Abedin; A design of intelligent controller for direct current; International Journal of Advances in Engineering and Management (IJAEM), 4(4), (2022) 519-536.; 2022-04-30; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Saifullah Mahmud, Mostafizur Rahman*, Md. Kamruzzaman, Md. Osman Ali, Md. Shariful Alam Emon, Hazera Khatun; Recent advances in lithium-ion battery materials for improved electrochemical performance: A Review; Results in Engineering, 15(2022) 100472; 2022-04-04; Impact Factor (IF): 7.9; Type: Journal; Area: Biomedical Engineering

  • Mostafizur Rahman., Mohammad Asaduzzaman Chowdhury., Md. Shahin Mia., Md. Ramjan Ali., Atiqur Rahman., Md. Osman Ali., Saifullah Mahmud; Fabrication and characterization of hybrid coating on Mg–Zn–Ca Mg alloy for enhanced corrosion and degradation resistance as medical implant; Ceramic International, 48(2022) 23314-23324.; 2022-03-18; Impact Factor (IF): 5.53; Type: Journal; Area: Biomedical Engineering

  • S. Islam, M. A. H. Mia and Mohammad Zoynal Abedin; Evaluation of causes and effects of fire and other safety incidents in readymade garment industry of Bangladesh; American Journal of Mechanical and Industrial Engineering (AJMIE), 7(1) (2022) 13-30.; 2022-03-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • ANM Mominul Islam Mukut, Hasan Mohamamad Mostofa Afroz, Hiroshi Mizunuma, Hiromichi Obara; Evaluation of Double-Sided Plasma Vortex Generator in Comparison with Vane Vortex Generator on Separation Control; International Journal of Automotive and Mechanical Engineering, VOL. 19, ISSUE 1, 9433 – 9446; 2022-02-28; Impact Factor (IF): 1.0; Type: Journal; Area: Fluid, Energy and Automotive Link: Click Here

  • Mostafizur Rahman, Rajkamal Balu, Naba Kumar Dutta, and Namita Roy Choudhury.; In Vitro Corrosion Resistance of a Layer-by-Layer Engineered Hybrid Coating on ZK60 Magnesium Alloy.; Sustainability, 14, no. 4 (2022): 2459.; 2022-02-21; Impact Factor (IF): 3.95; Type: Journal; Area: Chemical Engineering

  • Biplov Kumar Roy, Yannis P Korkolis, Yoshio Arai, Wakako Araki, Takafumi Iijima, Jin Kouyama; Plastic deformation of AA6061-T6 at elevated temperatures: Experiments and modeling; International Journal of Mechanical Sciences; 2022-02-15; Impact Factor (IF): 5.329; Type: Journal; Area: Mechanical Engineering

  • ANMMI Mukut, HMM Afroz; Numerical investigation of double sided plasma vortex generator in separation control; Fluid Dynamics Research, Volume 54, Number 1, 015508; 2022-02-11; Impact Factor (IF): 1.3; Type: Journal; Area: Fluid and Energy Link: Click Here

  • Md. Shariful Alam Emon, Mohsan Uddin Ahmad, Md Hasanuzzaman; Solar thermal energy conversion; Book: Technologies for Solar Thermal Energy Theory, Design, and Optimization; Chapter: 2; Academic Press; 2022-02-02; Type: Book Chapter; Area: Renewable Energy Link: Click Here

  • S. Islam, M. A. H. Mia and Mohammad Zoynal Abedin; Periodic maintenance of TOYOTA vehicle: Bangladesh perspective; International Journal of Advances in Engineering and Management (IJAEM), 4(3) (2022) 398-413.; 2022-02-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • A N M Mominul Islam Mukut, Hasan M M Afroz; Numerical investigation of double sided plasma vortex generator in separation control; Fluid Dynamics Research; 2022-01-31; Type: Journal; Area: Flow control Link: Click Here

  • Atiqur Rahman, Mohammad Asaduzzaman Chowdhury, Md. Bengir Ahmed Shuvho, Nayem Hossain, Mohammad Fotouhi, and Md Ramjan Ali; Fabrication and characterization of jute/cotton bio‑composites reinforced with eggshell particles; Springer; Polymer Bulletin; Online Published; 2022-01-31; Impact Factor (IF): 2.87; Type: Journal; Area: Bio-composite Link: Click Here

  • M. N. Hasan, S. Islam and Mohammad Zoynal Abedin; Performance evaluation of textile effluent treatment plant: Bangladesh perspective; International Journal of Engineering Materials and Manufacture, 7(1) (2022) 25-34.; 2022-01-15; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Md Nurun Nabi, Wisam K Hussam, Adib Bin Rashid, Jahidul Islam, Shamiul Islam, Hasan Mohammad Mostofa Afroz; Notable improvement of fuel properties of waste tire pyrolysis oil by blending a novel pumpkin seed oil–biodiesel; Energy Reports, Volume 8, Supplement 16, December 2022, Pages 112-119; 2022-01-12; Impact Factor (IF): 4.7; Type: Journal; Area: Energy Link: Click Here

  • Md Nurun Nabi, Wisam K Hussam, Hasan Mohammad Mostofa Afroz, Adib Bin Rashid, Jahidul Islam, ANM Mominul Islam Mukut; Investigation of engine performance, combustion, and emissions using waste tire Oil-Diesel-Glycine max biodiesel blends in a diesel engine; Case Studies in Thermal Engineering, Volume 39, November 2022, 102435; 2022-01-11; Impact Factor (IF): 6.4; Type: Journal; Area: Energy and Fuel Link: Click Here

  • Paul C. Okonkwo, El Manaa Barhoumi, Ibrahim B. Mansir, Wilfred Emori, Himangshu Bhowmik; Effect of electrode material on the hydrogen production using a low-cost home-made alkaline electrolyzer; Vacuum; 2022-01-04; Impact Factor (IF): 3.8; Type: Journal; Area: Energy Engineering Link: Click Here

  • Md Jahangir Alam, Mohammad Washim Dewan, Sojib Kummer Paul, Khurshida Sharmin; Investigation of jute and glass fibre reinforced hybrid composites manufactured through compression molding process; International Journal of Engineering Materials and Manufacture; 2022-01-01; Type: Journal; Area: Composite Materials Link: Click Here

  • i. Paul C. Okonkwo, Himangshu Bhowmik, Ibrahim B. Mansir, Mohammed Ahmed Awadh Al Sarj Al Marhoon, Naif Fawaz AhmedAl Sfarini; Effect of electrode spacing on hydrogen production using a home-made alkaline electrolyzer; Materials letter; 2022-01-01; Impact Factor (IF): 2.7; Type: Journal; Area: Energy Engineering Link: Click Here

  • A N M Mominul Islam Mukut and Hasan M M Afroz; Evaluation of double-sided plasma vortex generator in comparison with vane vortex generator on separation control; International Journal of Automotive and Mechanical Engineering; 2021-12-06; Type: Journal; Area: Flow control Link: Click Here

  • M. S. Uddin, Mohammad Zoynal Abedin; Segregation of plastic waste from solid waste stream: Bangladesh Perspective; International Journal of Engineering Materials and Manufacture, 6(4) (2021) 324-331.; 2021-12-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Rahat Mahmud Khan, Shaikh Al Mahmud Bhuiyan, Fariha Musharrat Haque, Murtaza Wasi, Md Ashiqur Rahman; Effects of unsafe workplace practices on the fire safety performance of ready-made garments (RMG) buildings; Safety science, Elsevier, Vol. 144; 2021-12-01; Impact Factor (IF): 5.4; Type: Journal; Area: Fire Dynamics

  • M. S. Uddin, Mohammad Zoynal Abedin; Fabrication and characterization of plastic tiles from plastic waste in Bangladesh; 8th Brunei International Conference on Engineering and Technology, Brunei Darussalam, 08-10 November 2021.; 2021-11-08; Type: Conference; Area: Engineering

  • • MD. OSMAN ALI, MA CHOWDHURY, M. RASEL, ASM LUTHFUL KARIM, MR KHAN, BA SHUVHO, and N. HOSSAIN; RECENT ADVANCES OF POWER GENERATION IN TRIBOLOGICAL ASPECT-A REVIEW; Journal of the Balkan Tribological Association; 2021-10-01; Type: Journal; Area: Tribology

  • • Md Osman Ali, Mohammad Zoynal Abedin, Md Dulal Ali, and Mohammad Rasel; Effect of Nanofluids on the Enhancement of Boiling Heat Transfer: A Review; International Journal of Engineering Materials and Manufacture; 2021-10-01; Type: Journal; Area: Thermal Engineering

  • M. O. Ali, Mohammad Zoynal Abedin, M. D. Ali, M. Rasel; Effect of Nanofluids on the enhancement of boiling heat transfer: A review; International Journal of Engineering Materials and Manufacture, 6(4) (2021) 259-283.; 2021-09-30; Impact Factor (IF): 1.272; Type: Journal; Area: Thermal Engineering

  • Mohammad Asaduzzaman Chowdhury, Nayem Hossain, Md Bengir Ahmed Shuvho, Mohammad Fotouhi, Md Sakibul Islam, Md Ramjan Ali, Mohammod Abul Kashem; Recent machine learning guided material research - A review; Computational Condensed Matter, 20 September 2021, e00597; 2021-09-20; Type: Journal; Area: Machine learning approach in material research Link: Click Here

  • M. S. Kobir, M. Akther, Mohammad Zoynal Abedin; Review on heat transfer enhancement in forced convection and two phase flows; Journal of Thermal Engineering and Technology, 6(1) (2021) 62-80.; 2021-09-15; Impact Factor (IF): 1.272; Type: Journal; Area: Thermal Engineering

  • Mohammad Asaduzzaman Chowdhury, Uttam Kumar Debnath, Mohamed KCHAOU, Bengir Ahmed Shuvho, Atiqur Rahman, Biplov Kumar Roy; Correlation between experimental and analytic approaches to study the erosion rate of aluminum-metal matrix composites; Journal of Engineering Research; 2021-09-15; Type: Journal; Area: Industrial Engineering

  • RV Ranganathan, MM Hossain, S Talukdar, R Ahasan, R Wang, M Uddi; Tunable Quantum Cascade Laser Absorption Spectroscopy for Plasma Assisted Oxidative Coupling of Methane to C2 Based Products; 2021 IEEE International Conference on Plasma Science (ICOPS); 2021-09-14; Impact Factor (IF): Unknown; Type: Conference; Area: Plasma Catalysis

  • S Talukdar, MM Hossain, RV Ranganathan, M Uddi; Study of Non-Equilibrium Plasma Effects on Detonation in Fuel Lean Natural Gas Mixtures; 2021 IEEE International Conference on Plasma Science (ICOPS); 2021-09-14; Impact Factor (IF): Unknown; Type: Conference; Area: Plasma

  • Z. Ahsan, U. Habiba and Mohammad Zoynal Abedin; Review of heat transfer enhancement using advanced enhancers; Journal of Thermal Engineering and Technology, 6(1) (2021) 26-61.; 2021-09-01; Impact Factor (IF): 1.27; Type: Journal; Area: Thermal Engineering

  • J. M. Chakma, Mohammad Zoynal Abedin; Review on heat transfer enhancement by rectangular fin; International Journal of Engineering Materials and Manufacture, 6(2) (2021) 81-94; 2021-09-01; Impact Factor (IF): 1.272; Type: Journal; Area: Thermal Engineering

  • Mohammad Asaduzzaman Chowdhury, Nayem Hossain, Md. Bengir Ahmed Shuvho, Md. Arefin Kowser, Md. Akibul Islam, Md. Ramjan Ali, Yaser A.EI-Badry, and Zeinhom M.EI-Bahyh; Improvement of Interfacial Adhesion Performance of the Kevlar Fiber Mat by depositing SiC/TiO2/Al2O3/Graphene Nanoparticles; Arabian Journal of Chemistry - Elsevier; 2021-08-27; Impact Factor (IF): 5.165; Type: Journal; Area: Nano-Materials

  • Mohammad Asaduzzaman Chowdhury, Nayem Hossain, Md. Bengir Ahmed Shuvho, Md. Arefin Kowser, Md. Akibul Islam, Md. Ramjan Ali, Yaser A.EI-Badry, and Zeinhom M.EI-Bahyh; Improvement of Interfacial Adhesion Performance of the Kevlar Fiber Mat by depositing SiC/TiO2/Al2O3/Graphene Nanoparticles; Arabian Journal of Chemistry - Elsevier; 2021-08-24; Impact Factor (IF): 5.2; Type: Journal; Area: Material Science Link: Click Here

  • Mohammad Asaduzzaman Chowdhury, Md. Shamim Reza, Nayem Hossain, Md. Ramjan Ali, Md. Arefin Kowser, and Md. Bengir Ahmed Shuvho; Improvement of Corrosion Resistance of galvanization/nickel/chrome plating low carbon steels in H2SO4 under dynamic condition; Surface Topography: Metrology and Properties, Volume 9, Number 3; 2021-08-11; Impact Factor (IF): 2.038; Type: Journal; Area: Surface Coating Link: Click Here

  • Mohammad Asaduzzaman Chowdhury, Nayem Hossain, Abdullah Al Masum, Md. Sakibul Islam, Mohammad Shahin, Md. Imran Hossain, Md. Bengir Ahmed Shuvho, Md. Ramjan Ali, A.K.M Foysal Ahmed, and Rajib Nandee; Surface Coatings Analysis and Their Effects on Reduction of Tribological Properties of Coated Aluminum under Motion with ML Approach; Materials Research Express, Volume 8, Number 8; 2021-08-10; Impact Factor (IF): 1.929; Type: Journal; Area: Surface Coating Link: Click Here

  • MBA Shuvho, MA Chowdhury, M Kchaou, BK Roy, A Rahman, MA Islam; Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles; Chemical Data Collections; 2021-08-01; Impact Factor (IF): 2.7; Type: Journal; Area: Materials Science Link: Click Here

  • Mostafizur Rahman, Naba K. Dutta, and Namita Roy Choudhury.; Microroughness induced biomimetic coating for biodegradation control of magnesium.; Materials Science and Engineering: C 121 (2021): 111811; 2021-07-20; Impact Factor (IF): 8.45; Type: Journal; Area: Biomedical Engineering

  • Md. Mahmud-Or-Rashid and Mr. Saddam Hossen; A Preferable Brain Computer Interface for Paralyzed/Disabled People; International Journal of Engineering Research & Technology (IJERT), ISSN: 2278-0181, Vol. 10 Issue 06, June-2021; 2021-06-24; Type: Journal; Area: Artificial Intelligence Link: Click Here

  • Biplov K Roy, Yannis P Korkolis, Yoshio Arai, Wakako Araki, Takafumi Iijima, Jin Kouyama; Influence of axial feed rate on shape and thickness changes during multi-pass tube spinning: experiments and modelling; Forming the Future; 2021-06-15; Type: Journal; Area: Manufacturing Process

  • Mostafizur Rahman, Rajkamal Balu, Amanda Abraham, Naba Kumar Dutta, Namita Roy Choudhury.; Engineering a bioactive hybrid coating for in vitro corrosion control of magnesium and its alloy.; ACS Applied Bio Materials, 2021, 4(7), 5542-5555.; 2021-06-06; Impact Factor (IF): 4.7; Type: Journal; Area: Chemical Engineering

  • M. O. Ali, Mohammad Zoynal Abedin, M. D. Ali, M. Rasel; Effect of Nanofluids on the enhancement of boiling heat transfer: A review; International Conference on Engineering Materials and Manufacture, Kualalumpur, Malaysia, 22-23 May 2021.; 2021-05-22; Type: Conference; Area: Engineering

  • M. S. Uddin, Mohammad Zoynal Abedin; Segregation of plastic waste from solid waste stream: Bangladesh Perspective; International Conference on Engineering Materials and Manufacture, Kualalumpur, Malaysia, 22-23 May 2021.; 2021-05-22; Type: Conference; Area: Engineering

  • • Md. Osman Ali, Mohammad Zoynal Abedin, Md. Dulal Ali and Mohammad Rasel; Effect of nanofluids on the enhancement of boiling heat transfer: A Review; International Conference of Engineering Materials and Manufacture (ICEMM); 2021-05-22; Type: Conference; Area: Thermal Engineering

  • S. Hossen, D. K. Roy, Mohammad Zoynal Abedin; A review on heat transfer enhancement by wire coil inserts in various medium; Journal of Material Science & Manufacturing Technology, 6(1) (2021) 25-40.; 2021-05-01; Impact Factor (IF): 1.27; Type: Journal; Area: Thermal Engineering

  • M. O. Ali, Mohammad Zoynal Abedin, M. Rasel; Effect of surface tension on phase change heat transfer: A review; Journal of Thermal Engineering and Technology, 6(1) (2021) 1-25.; 2021-05-01; Impact Factor (IF): 1.27; Type: Journal; Area: Thermal Engineering

  • Mahmud Khan, Mohammad W. Dewan and Md. Zahidul Sarkar; Effects of Welding Technique, Filler Metal and Post-Weld Heat Treatment on Stainless Steel and Mild Steel Dissimilar Welding Joint; Journal of Manufacturing Processes; 2021-04-01; Impact Factor (IF): 5.684; Type: Journal; Area: Welding Link: Click Here

  • Sharmi Mazumder, HMM Afroz, MA Hossain, Akio Miyara, Shaon Talukdar; Study of in-tube condensation heat transfer of zeotropic R32/R1234ze (E) mixture refrigerants; International Journal of Heat and Mass Transfer Volume 169, April 2021, 120859; 2021-04-01; Impact Factor (IF): 5.0; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • Biplov Kumar Roy, Yannis P Korkolis, Yoshio Arai, Wakako Araki, Takafumi Iijima, Jin Kouyama; A study of forming of thin-walled hemispheres by mandrel-free spinning of commercially pure aluminum tubes; Journal of Manufacturing Processes; 2021-04-01; Impact Factor (IF): 5.01; Type: Journal; Area: Manufacturing Process

  • Mahmud Khan , Mohammad Washim Dewan , Md. Zahidul Sarkar; Effects of welding technique, filler metal and post-weld heat treatment on stainless steel and mild steel dissimilar welding joint; Journal of Manufacturing Processes; 2021-04-01; Impact Factor (IF): 6.8; Type: Journal; Area: Mechanical Characterization

  • Sharmi Mazumder, Hasan MM Afroz, MA Hossain, Akio Miyara, Shaon Talukdar*; Study of in-tube condensation heat transfer of zeotropic R32/R1234ze(E) mixture refrigerants; --; 2021-04-01; Impact Factor (IF): 4.947; Type: Journal; Area: Thermofluid Link: Click Here

  • Paul C. Okonkwo, Ikram Ben Belgacem, Oladeji O. Ige, Wilfred Emori, Paul C. Uzoma, Mohammad Omar Eqbal and Himangshu Bhowmik; Potentiodynamic polarization test as a versatile tool for bipolar plates materials at start-up and shut-down environments: a review; DUET; 2021-03-25; Impact Factor (IF): 1.5; Type: Journal; Area: Energy Engineering

  • M. Ashiqur Rahman; S. M. Mohiuddin Siddique; M. Mahbubur Rahman; Whirling of a Jeffcott Rotor on a Superelastic SMA Shaft; American Institute of Physics; 2021-02-25; Type: Conference; Area: Mechanics Link: Click Here

  • • Md. Osman Ali, Mohammad Zoynal Abedin, Mohammad Rasel; Effect of Surface Tension on Phase Change Heat Transfer: A Review; Journal of Thermal Engineering and Technology; 2021-02-01; Type: Journal; Area: Thermal Engineering

  • S. Islam, M. S. Islam, Mohammad Zoynal Abedin; Review on heat transfer enhancement by louvered fin; International Journal of Engineering Materials and Manufacture (IJEMM), 6(1) (2021) 60-80.; 2021-01-30; Impact Factor (IF): 1.27; Type: Journal; Area: Thermal Engineering

  • M. Z. Hossain, M. J. Hossain, M. M. Rahman, M. D. M. Hasan and M. A. Alam; Generation of Electricity by Microbial Fuel Cells using Industrial Effluent; International Journal of Engineering Materials and Manufacture, 6(1) 22-33; 2021-01-30; Type: Journal; Area: Energy

  • Saddam Hossen, D. K. Roy, M. Z. Abedin; A review on heat transfer enhancement by wire coil inserts in various medium; Journal of Material Science & Manufacturing Technology, 6(1) (2021) 25-40.; 2021-01-27; Type: Journal; Area: Thermal Engineering Link: Click Here

  • Shaon Talukdar, Rajagopalan V. Ranganathan, Mruthunjaya Uddi; Study of Ozone Effects on CH4/O2/N2 Detonation Waves; --; 2021-01-20; Impact Factor (IF): --; Type: Conference; Area: Combustion Link: Click Here

  • S. Hossain, Mohammad Zoynal Abedin; Effect of minimum quantity lubrication system for improving surface roughness in turning operation; International Journal of Engineering Materials and Manufacture (IJEMM), 6(1) (2021) 50-59.; 2021-01-01; Impact Factor (IF): 1.27; Type: Journal; Area: Engineering

  • Md Anowar Hossain, IM Mahbubul, Md Abdul Aziz, Hasan Mohammad Mostofa Afroz, Md Rashedul Islam, Md Johirul Islam; Development and performance analysis of a PCM based cooling fan for hot climate of Bangladesh; Energy and Thermofluids Engineering, Vol-1, Page: 1-9; 2020-12-27; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • Khurshida Sharmin and Heshmat A Aglan; Synthesis and Characterization of PVA Based Anion Exchange Membranes for Solid Polymer Electrolytes; DUET Journal; 2020-12-20; Type: Journal; Area: Electrolyte Membrane

  • S. Mazumder, H.M.M. Afroz, Md. Anowar Hossain, A. Miyara, S. Talukdar; Study of in-tube condensation heat transfer of zeotropic R32/R1234ze(E) mixture refrigerants; International Journal of Heat and Mass Transfer; 2020-12-12; Type: Journal; Link: Click Here

  • A N M M I Mukut, H M M Afroz, H Mizunuma and O Hiromichi,; An Approach to Suppress Flow Separation by Plasma Vortex Generator as a Combined Active and Passive Control Mechanism; IOP Conf. Ser.: Mater. Sci. Eng. 926 012005; 2020-12-07; Type: Journal; Area: Flow control Link: Click Here

  • M. M. Rahman, Mohammad Zoynal Abedin; Review on heat transfer enhancement by coiled tube; Journal of Research in Mechanical Engineering and Applied Mechanics, 5(2) (2020) 1-10.; 2020-11-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Mostafizur Rahman, Naba Kumar Dutta, Namita Roy Choudhury; Magnesium Alloys with Tunable Interfaces as Bone Implant Materials; Frontier Bioengineering and Biotechnology, volume 8 (2020), article 564,; 2020-10-06; Impact Factor (IF): 8.8; Type: Journal; Area: Biomedical Engineering

  • • Mohammad Asaduzzaman Chowdhury, MdBengir Ahmed Shuvho, Md Imran Hossain, Md. Osman Ali, Mohamed Kchaou, Atiqur Rahman, NilufaYeasmin, AbdusSabur Khan, MdAzizur Rahman, and M. Mofijur; Multiphysical analysis of nanoparticles and their effects on plants; Biotechnology and Applied Biochemistry; 2020-10-05; Impact Factor (IF): 2.72; Type: Journal; Area: Nanotechnology

  • M. S. Ahmed, Mohammad Zoynal Abedin; Review on heat transfer enhancement by insert devices; International Journal of Engineering Materials and Manufacture (IJEMM), 5(4) (2020) 130-147.; 2020-10-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • ANMMI Mukut, HMM Afroz, H Mizunuma, O Hiromichi; An approach to suppress flow separation by plasma vortex generator as a combined active and passive control mechanism; IOP Conference Series: Materials Science and Engineering, Vol:926, Issue:1; 2020-09-01; Type: Journal; Area: Fluid, Energy and Automotive Link: Click Here

  • Biplov Kumar Roy, Yannis P Korkolis, Yoshio Arai, Wakako Araki, Takafumi Iijima, Jin Kouyama; Experimental and numerical investigation of deformation characteristics during tube spinning; The International Journal of Advanced Manufacturing Technology volume 110, pages1851–1867 (2020); 2020-09-01; Impact Factor (IF): 3.32; Type: Journal; Area: Manufacturing Process

  • Abdul Moudood, Anisur Rahman, Nayeem Md Lutful Huq, Andreas Öchsner, Md Mainul Islam, Gaston Francucci; Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches; Polymer Composites, Volume 41, Issue 12; 2020-08-17; Impact Factor (IF): 3.171; Type: Journal; Area: Applied Mechanics Link: Click Here

  • Shibbir Ahmad and Md. Kamruzzaman, M.Iqbal; Impacts of optimization in apparel supply chain focusing on ANN and Genetic Algorithm; Proceedings of the International Conference on Industrial Engineering and Operations Management Aug 10-14, 2020, Detroit, MI, USA.; 2020-08-10; Type: Conference; Area: Industrial Engineering

  • Mostafizur Rahman, Yuncang Li, Cuie Wen; HA coating on Mg alloys for biomedical applications: A review.; Journal of Magnesium and Alloys, 8.3 (2020): 929-943.; 2020-08-05; Impact Factor (IF): 13.8; Type: Journal; Area: Biomedical Engineering

  • MBA Shuvho, MA Chowdhury, M Kchaou, BK Roy, A Rahman, MA Islam; Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles; Chemical Data Collections, Volume 28; 2020-08-01; Type: Journal; Area: Metal fabrication

  • Zobaer Shah, Q.M., M.A Kowser & M.A Chowdhury; Investigation Of The Combined Effect Of Notch And Fretting On Bending Fatigue; Theoretical and Applied Mechanics; 2020-06-13; Type: Journal; Area: Materials

  • M. A. S. Sujon, M. A. Habib, Mohammad Zoynal Abedin, M. M. Islam; Experimental investigation of mechanical and water absorption properties on fiber stacking sequence and orientation of jute/carbon epoxy hybrid composites; Journal of Material Research and Technology (JMRT), 9(5) (2020) 10970-10981.; 2020-06-01; Impact Factor (IF): 5.039; Type: Journal; Area: Engineering

  • Zobaer Shah, Q.M., M.A Chowdhury & M.A Kowser; Fretting & friction induced fatigue failure: damage criterion of polytetrafluoroethylene; Heliyon; 2020-06-01; Type: Journal; Area: Fretting Fatigue Failure Link: Click Here

  • Md. Mahdi-Ul- Ishtiaque, Parnab Saha, Amit Sutradhar, Musanna Galib and Mohammed Abdul Hannan; A sustainable approach to improve the efficiency of earth pipe cooling system; International Journal of Sustainable Engineering; DOI:10.1080/19397038.2020.1740820.; 2020-03-21; Type: Journal; Area: Thermal Engineering

  • Mostafizur Rahman., Yuncang Li., Cuie Wen; Realization and characterization of double-layer Ca-P coating on WE43 Mg alloy for biomedical applications.; Surface Coatings and Technology, Volume 398, 25 September 2020, 126091; 2020-02-06; Impact Factor (IF): 4.81; Type: Journal; Area: Biomedical Engineering

  • Md Shuvho, Bengir Ahmed, Mohammad Asaduzzaman Chowdhury, Nayem Hossain, Biplov Kumar Roy, Md Kowser, Azizul Islam; Tribological study of Al-6063-based metal matrix embedded with SiC–Al2O3–TiO2 particles; SN Applied Sciences, volume 2; 2020-02-01; Type: Journal; Area: Material characterization

  • Md. Bengir Ahmed Shuvho, Mohammad Asaduzzaman Chowdhury, Nayem Hossain, Biplov Kumar Roy, Md. Arefin Kowser & Azizul Islam; Tribological study of Al-6063-based metal matrix embedded with SiC–Al2O3–TiO2 particles; SN Applied Sciences; 2020-01-29; Type: Journal; Area: Metal Matrix Composites Link: Click Here

  • Md. Anowar Hossain, I. M. Mahbubul, M.A. Aziz, H.M.M. Afroz, M.R. Islam, M.J. Islam; Development and performance analysis of a PCM based cooling fan for hot climate of Bangladesh; Energy and Thermofluids Engineering; 2020-01-12; Type: Journal; Link: Click Here

  • Zobaer Shah, Q.M., M.A Kowser & M.A Chowdhury; Investigation of the Combined Effect of Notch And Fretting on Bending Fatigue; Theoretical and Applied Mechanics; 2020-01-01; Type: Journal; Area: Fretting Fatigue Analysis Link: Click Here

  • Daniel J. Huggett, Mohammad W. Dewan, Muhammad A. Wahab, Thunshun W. Liao and Ayman M. Okeil; On-line phased array ultrasonic testing system for friction stir welding applications; US Patent, US 2019/0388998 A1; 2019-12-26; Type: Magazine;

  • A. S. Sujon, T. H. Supto, F. Shariar, M. M. R. Pallab, Mohammad Zoynal Abedin, M. A. Habib; Fabrication and experimental investigation on tensile and flexural properties for different stacking sequence of jute and carbon fiber reinforced epoxy composite; 3rd International Conference on Composite Material, Polymer Science and Engineering, Bangkok, Thailand, 24-25 October 2019.; 2019-10-24; Type: Conference; Area: Engineering

  • Shibbir Ahmad and Md. Kamruzzaman, Md.Salim Hossain and Md.Mijanur Rahman; Apparel supply chain optimization by developing e-commerce: An impact analysis; Proceedings of the International Conference on Industrial Engineering and Operations Management Toronto, Canada, October 23-25, 2019.; 2019-10-23; Type: Conference; Area: Industrial Engineering

  • Shibbir Ahmad and Md. Kamruzzaman, Mahathir Mohammad Bappy; Supply chain optimization in apparel manufacturing; Proceedings of the International Conference on Industrial Engineering and Operations Management Toronto, Canada, October 23-25, 2019.; 2019-10-23; Type: Conference; Area: Industrial Engineering

  • Shibbir Ahmad and Md.Kamruzzaman; Supply chain optimization with Genetic Algorithm focusing on right supplier selection at real time in apparel manufacturing; Proceedings of the International Conference on Industrial Engineering and Operations Management Toronto, Canada, October 23-25, 2019.; 2019-10-23; Type: Conference; Area: Industrial Engineering

  • A. S. Sujon, T. H. Supto, F. Shariar, M. M. R. Pallab, Mohammad Zoynal Abedin, M. A. Habib; Fabrication and experimental investigation on tensile and flexural properties for different stacking sequence of jute and carbon fiber reinforced epoxy composite; Key Engineering Materials, 858 (2019) 72-77.; 2019-10-01; Impact Factor (IF): 0.49; Type: Journal; Area: Engineering

  • H. Bhowmik, A Gharibi, A Yaarubi, N Alawi; Transient natural convection heat transfer analyses from a horizontal cylinder; DUET; 2019-09-08; Impact Factor (IF): 4.01; Type: Journal; Area: Thermal Engineering

  • M. Ruhul Amin, M.A Chowdhury & M.A Kowser; Characterization and performance analysis of composite bioplastics synthesized using titanium dioxide nanoparticles with corn starch; Heliyon; 2019-08-28; Type: Journal; Area: Composite Bioplastics Link: Click Here

  • Quazi Md. Zobaer Shah, Md. Asaduzzaman Chowdhury & Md. Arefin Kowser; On the diversity in design for different bending fretting fatigue mechanism; SN Applied Sciences; 2019-08-21; Type: Journal; Area: Fretting Fatigue Link: Click Here

  • Shaon Talukdar, Hasan Mohammad Mostafa Afroz, Md. Anowar Hossain, M.A. Aziz, Md. Monir Hossain; Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application; Journal of Energy Storage; 2019-08-01; Type: Journal; Link: Click Here

  • S Talukdar, HMM Afroz, MA Hossain, MA Aziz, MM Hossain; Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application; Journal of Energy Storage; 2019-08-01; Impact Factor (IF): Unknown; Type: Journal; Area: Thermal Energy Storage, Heat Transfer

  • Shaon Talukdar, Hasan Mohammad Mostafa Afroz, Md Anowar Hossain, MA Aziz, Md Monir Hossain; Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application; Journal of Energy Storage, Vol:24, Page:100797; 2019-08-01; Impact Factor (IF): 8.9; Type: Journal; Area: Energy, Refrigeration Link: Click Here

  • A N M Mominul Islam Mukut, Md. Ibrahim Hossain; Numerical investigation of TWEB on drag reduction; AIP Conference Proceedings 2121, 060003 (2019); 2019-07-18; Type: Journal; Area: Drag reduction

  • Abdul Aziz Shuvo, M. Morshed, Md. Shariful Alam Emon, Amitav Tikadar, Titan C. Paul; Heat Transfer Characteristics of a Phase Change Material Fluid in Microchannels under Pulsating Flow Condition; Proceedings of the ASME Summer Heat Transfer Conference, July 15-18, 2019, Bellevue, WA, USA; 2019-07-15; Type: Conference; Area: Heat Transfer

  • Khurshida Sharmin, Jahangir Alam, Mohammad Washim Dewan; Fabrication and characterization of jute/glass fiber reinforced epoxy hybrid composites; Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh; 2019-06-06; Type: Journal; Area: Composite Material

  • Khurshida Sharmin, Jahangir Alam and Mohammad Washim Dewan; Fabrication and characterization of jute/glass fiber reinforced epoxy hybrid composites; Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh; 2019-06-01; Type: Journal;

  • Md. Anowar Hossain, S. Talukdar; Development and Performance Evaluation of a Solar Energy based Portable Micro-Cold Storage; DUET Journal; 2019-06-01; Type: Journal; Link: Click Here

  • M. A. Uddin, M. A. Islam, Mohammad Zoynal Abedin; Heat transfer enhancement by coated surface: a review study; International Journal of Modern Studies in Mechanical Engineering (IJMSME) 5(1) (2019) 10-14.; 2019-06-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • M.A. Wahab, M.W. Dewan, D.J. Huggett, A.M. Okeil, T.W. Liao, A.C. Nunes; Challenges in the detection of weld-defects in friction-stir-welding (FSW); Advances in Materials and Processing Technologies; 2019-04-03; Type: Journal;

  • S. Talukdar*, HMM Afroz, MA Hossain, MA Aziz, M. Hossain; Heat transfer enhancement of charging and discharging of phase change materials and size optimization of a latent thermal energy storage system for solar cold storage application; --; 2019-03-06; Impact Factor (IF): 3.762; Type: Journal; Area: Energy Link: Click Here

  • A N M Mominul Islam Mukut, Zoynal Abedin; Review on Aerodynamic Drag Reduction of Vehicles; International Journal of Engineering Materials and Manufacture; 2019-03-01; Type: Journal; Area: Drag reduction

  • Quazi Md. Zobaer Shah, Mohammad Asaduzzaman Chowdhury & Md. Arefin Kowser; Failure Mechanism of Polytetrafluoroethylene Under Friction Fatigue, M. J Failure Analysis and Prevention; Journal of Failure Analysis and Prevention; 2019-01-25; Type: Journal; Area: Fatigue Failure Link: Click Here

  • H. Bhowmik, A Gharibi, A Yaarubi, N Alawi; Transient natural convection heat transfer analyses from a horizontal cylinder; Case Studies in Thermal Engineering; 2019-01-09; Impact Factor (IF): 6.4; Type: Journal; Area: Thermal Engineering Link: Click Here

  • A. N. M. M. I. Mukut, Mohammad Zoynal Abedin; Review on aerodynamic drag reduction of vehicles; International Journal of Engineering Materials and Manufacture 4(1) (2019) 1-14.; 2019-01-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Saadman Sakib Rahman, Zurais Ibne Ashraf, Akm Nurul Amin, Muhammad Shahriar Bashar, Md. Fardian Kabir Ashik and M. Kamruzzaman; Tuning nanofluids for improved lubrication performance in turning biomedical grade titanium alloy; Journal of Cleaner Production, Volume 206, 1 January 2019, Pages 180-196, DOI:10.1016/j.jclepro.2018.09.150.; 2019-01-01; Type: Journal; Area: Manufacturing

  • Saddam Hossen*, Mahmud-Or-Rashid, Mantaka Taimullah, Farhan Ahmed Shakil, and Dr.A K M Monjur Morshed; Experimental Investigation of an Air to Air Heat Pipe Heat Exchanger for Moderate Temperature Waste Heat Recovery; International Conference on Mechanical, Industrial and Energy Engineering, 2018.; 2018-12-24; Type: Conference; Area: Thermal Engineering Link: Click Here

  • Mustafi. L, Mostafizur Rahman, M.N.E.A. Al Nasim, M.A. Chowdhury, M. Monir,; Deposition behavior and tribological properties of diamond-like carbon coatings on stainless steels via chemical vapor deposition.; International Journal of Minerals, Metallurgy, and Materials, 25 (2018) 1335-1343; 2018-12-06; Impact Factor (IF): 3.63; Type: Journal; Area: Materials Engineering

  • Goutam Panday, Zurais Ibne Ashraf, Khalid Ibn Muneer, Khandaker Shamail Hossain, Md. Fardian Kabir Ashik and Md Kamruzzaman,; Assessing near-dry lubrication (35 ml/h) performance in hard turning process of hardened (48 HRC) AISI 1060 carbon steel; The International Journal of Advanced Manufacturing Technology, Vol. 99(1–2), November 2018. DOI:10.1007/s00170-018-2629-y; 2018-11-07; Type: Journal; Area: Manufacturing

  • L Mustafi, MM Rahman, MNEA Al Nasim, MA Chowdhury, MH Monir; Deposition behavior and tribological properties of diamond-like carbon coatings on stainless steels via chemical vapor deposition; International Journal of Minerals, Metallurgy, and Materials; 2018-10-30; Impact Factor (IF): Unknown; Type: Journal; Area: Materials Science

  • M.A. Aziz, H. M. M. Afroz, S. Talukder, and Md. Anowar Hossain; Experimental study of solidification and melting characteristics of thermal energy storage (TES) system; Publisher Logo Conference Proceedings; 2018-07-13; Type: Journal; Link: Click Here

  • Md Abdul Aziz, Hasan MM Afroz, Shaon Talukder, Md Anowar Hossain; Experimental study of solidification and melting characteristics of thermal energy storage (TES) system; AIP Conference Proceedings, Vol:1980, Issue:1; 2018-07-13; Impact Factor (IF): 1; Type: Conference; Area: Energy and Refrigeration Link: Click Here

  • Biplov K Roy, Yannis P Korkolis, Yoshio Arai, Wakako Araki, Takafumi Iijima, Jin Kouyama; Experiments and simulation of shape and thickness evolution in multi-pass tube spinning; Journal of Physics: Conference Series; 2018-07-01; Type: Conference; Area: Numerical Analysis

  • MM Shahin, MA Chowdhury, MA Kowser, UK Debnath, MH Monir; Investigation of sustainability of lubricated journal bearing under relevant design parameters; Industrial Lubrication and Tribology; 2018-05-08; Impact Factor (IF): Unknown; Type: Journal; Area: Tribology

  • 8. MM Shahin, MA Chowdhury, MA Kowser, UK Debnath, MH Monir; Investigation of sustainability of lubricated journal bearing under relevant design parameters; Industrial Lubrication and Tribology; 2018-05-08; Type: Journal; Area: Tribology and Lubrication of Materials Link: Click Here

  • F. M. Haque, M. A. R. Khandoker, M. Wasi, R. M. Khan, S. A. Mahmud, and M. A. Rahman; Computer modelling of fire safety performance of a ready-made garments building in Bangladesh; Symposium Proceeding on Safety in Garment Industry, Five Years After Rana Plaza; 2018-04-30; Type: Conference; Area: Fire Dynamics

  • Nayeem Md Lutful Huq, Md Raisuddin Khan, Amir Akramin Shafie, Md Masum Billah, Syed Masrur Ahmmad; Motion Investigation of a Snake Robot with Different Scale Geometry and Coefficient of Friction; Robotics, Volume 7, Issue 2.; 2018-04-28; Impact Factor (IF): 1.79; Type: Journal; Area: Applied Mechanics Link: Click Here

  • Saad B Aziz, Mohammad W Dewan, Daniel J Huggett, Muhammad A Wahab, Ayman M Okeil, T Warren Liao; A fully coupled thermomechanical model of friction stir welding (FSW) and numerical studies on process parameters of lightweight aluminum alloy joints; Acta Metallurgica Sinica (English letters); 2018-01-18; Type: Journal;

  • Mohammad Zoynal Abedin, M. R. Sarker; Experimental study of heat transfer enhancement through a tube with wire-coil inserts at low turbulent Reynolds number; International Journal of Engineering Materials and Manufacture 3(3) (2018) 122-133.; 2018-01-01; Impact Factor (IF): 1.272; Type: Journal; Area: Thermal Engineering

  • Kazi Imdadul Hassan, H.H. Masjuki, M.A. Kalam, M. kamruzzaman; Amelioration of diesel-biodiesel-alcohol blends properties using EHN and DTBP ignition promoter and feasibility study as CI engine fuels; Energy Conversion and Management,; 2018-01-01; Impact Factor (IF): 10.9; Type: Journal; Area: Energy

  • M.A. Aziz, H.M.M. Afroz, S. Talukder, Md. Anowar Hossain; Experimental study of solidification and melting characteristics of thermal energy storage (TES) system; The 12th International Conference of Mechanical Engineering, ICME2017; 2017-12-20; Type: Conference; Link: Click Here

  • A Sutradhar, M S H Sunny, M Mandal and R Ahmed; Design and Construction of an Automatic Electric Wheelchair: An Economic Approach for Bangladesh; 3rd International Conference on Electrical Information and Communication Technology (EICT-2017), PI-61245, Khulna, Bangladesh, DOI: 10.1109/EICT.2017.8275159.; 2017-12-07; Type: Conference; Area: Control Engineering

  • Saadman Rahman, Md. Zurais I Ashraf, M. Kamruzzaman, Md. Mosharrof Hossain; Crystallinity, surface morphology and chemical analysis of recast layer and rutile TiO2 (110) formation on Ti-6Al-4V Eli by wire-EDM to enhance bioactivity; Vol. 93(9), pp. 3285-3296, December 2017. DOI:10.1007/s00170-017-0772-5; 2017-12-01; Impact Factor (IF): 7.0; Type: Journal; Area: Manufacturing

  • MA Kowser, HMM Afroz, K Khalil, NML Huq; Environment Friendly Continuous Flow Gas Generation by Fluidized Bed Rice Husk and Saw Dust Gasifier; DUET Journal; 2017-12-01; Type: Journal; Area: gasificacion and energy conversion Link: Click Here

  • M. M. Rahman, Y. Kudo, M. K. Bashar, K. Kariya, A. Miyara; Experimental Study on Condensation Heat Transfer and Pressure Drop inside 2.13 mm ID Smooth and Microfin Horizontal Tube; The 1st Asian Conference on Thermal Sciences, 2017, Jeju Island, Korea; 2017-11-20; Type: Conference; Area: Thermal Engineering

  • Md. Zurais I Ashraf, Muhammad S Bashar, M. Kamruzzaman, A.K.M N Amin, Md. M Hossain; The surface morphology, chemical composition and crystallinity of the recast layer of wire-EDM modified extra low interstitials (Eli) Ti-6Al-4V alloy; Journal of Alloys and Compounds.; 2017-10-30; Impact Factor (IF): 6.3; Type: Journal; Area: Manufacturing

  • HK Imdadul, HH Masjuki, MA Kalam, NWM Zulkifli, M Kamruzzaman, MM Shahin, MM Rashed; Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes; Journal of Cleaner Production, Journal Volume 141, pp. 928-939, Publication date 01 October 2017.; 2017-10-01; Type: Journal; Area: Energy

  • M S H Sunny, E Hossain, A Sutradhar, M Mandal and M A Rafiq; Evaluation and Development of a Self-ruling Internal Control System for Preventing Car Accidents Using Artificial Neural Network; 4th International Conference on Advances in Electrical Engineering (ICAEE-2017), PI-7544, Dhaka, Bangladesh, DOI: 10.1109/ICAEE.2017.8255370.; 2017-09-28; Type: Conference; Area: Artificial Intelligence

  • M. Mostaqur Rahman, Keishi Kariya, Akio Miyara; An experimental study and development of new correlation for condensation heat transfer coefficient of refrigerant inside a multiport minichannel with and without fins; International Journal of Heat and Mass Transfer, 116, 50-60; 2017-09-05; Impact Factor (IF): 5.0; Type: Journal; Area: Thermal Engineering

  • Himangshu Bhowmik and Ruhul Amin; Efficiency improvement of flat plate solar collector using reflector; DUET; 2017-09-01; Impact Factor (IF): 3.6; Type: Journal; Area: Energy Engineering

  • M. Mostaqur Rahman, Keishi Kariya, Akio Miyara; Experimental Investigation of Condensation Heat Transfer and Adiabatic Pressure Drop Characteristics Inside a Microfin and Smooth Tube; International Journal of Air-Conditioning and Refrigeration, 25(3), 1750027-1750027-11; 2017-08-29; Impact Factor (IF): 2.5; Type: Journal; Area: Refrigeration and Air-conditioning

  • Md. Anowar Hossain, M.A. Uddin, M.R. Hossen, H.M.M. Afroz; Experimental Analysis of a Triple Concentric Tube Heat Exchanger; International Journal of Modern Studies in Mechanical Engineering (IJMSME); 2017-08-01; Type: Journal; Link: Click Here

  • Md. Masud Rana Khan, Md. Anowar Hossain, Hasan M. M. Afroz, and Akio Miyara; Prediction of in-tube pressure drop of low GWP refrigerants during condensation and evaporation; Publisher Logo Conference Proceedings; 2017-06-20; Type: Journal; Link: Click Here

  • Md Masud Rana Khan, Md Anowar Hossain, Hasan MM Afroz, Akio Miyara; Prediction of in-tube pressure drop of low GWP refrigerants during condensation and evaporation; AIP Conference Proceedings, Vol:1851, Issue:1; 2017-06-19; Impact Factor (IF): 1; Type: Conference; Area: Refrigeration and Air conditioning Link: Click Here

  • Kazi Imdadul Hassan, H. H. Masjuki, M. A. Kalam, M. Kamruzzaman; Effect of nitrate and peroxide-based ignition promoter on diesel-biodiesel-alcohol blends and feasibility study as CI engine fuels; International Journal of Greenhouse Gas Control,; 2017-06-15; Impact Factor (IF): 5.3; Type: Journal; Area: Energy

  • M. Mostaqur Rahman, Keishi Kariya, Akio Miyara; Comparison and development of new correlation for adiabatic two-phase pressure drop of refrigerant flowing inside a multiport minichannel with and without fins; International Journal of Refrigeration, 82, 119-129; 2017-06-02; Impact Factor (IF): 3.7; Type: Journal; Area: Refrigeration and Air-conditioning

  • M Kamruzzaman, Saadman Sakib Rahman, Md Zurais Ibne Ashraf, Nikhil Ranjan Dhar; Modeling of chip–tool interface temperature using response surface methodology and artificial neural network in HPC-assisted turning and tool life investigation; The Int. Journal of Advanced Manufacturing Technology, Vol. 90(5-8), PP. 1547-1568, 2017.; 2017-05-01; Impact Factor (IF): 3.5; Type: Journal; Area: Manufacturing

  • H.K. Imdadul, M.M. Shahin, H.H. Masjuki. M.A. Kalam, M. Kamruzzaman; H.K. Rashedul; Quality improvement of biodiesel blends using different fuel additives to reduce fuel consumption and NO emission from CI engine; Vol. 138, pp. 327-337, 15 April 2017. https://doi.org/10.1016/j.enconman.2017.01.077; 2017-04-15; Impact Factor (IF): 10.9; Type: Journal; Area: Energy

  • Imran H Khan, Hasan MM Afroz, MA Karim; Effect of PCM on temperature fluctuation during the door opening of a household refrigerator; International Journal of Green Energy, Volume 14, Issue 4,Pages 379-384; 2017-03-16; Impact Factor (IF): 3.1; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • A Hossain, Muhammad Afaz Uddin, R Hossen, Hasan Mohammad Mostofa Afroz; Experimental analysis of a triple concentric tube heat exchanger; International Journal of Modern Studies in Mechanical Engineering , Volume 3, Issue 3, PP 1-10; 2017-03-07; Type: Journal; Area: Thermal Engineering Link: Click Here

  • MA Chowdhury, MA Kowser, Q.M. Zobaer Shah, Sumon Das; Characteristics and damage mechanisms of bending fretting fatigue of materials; International Journal of Damage Mechanics; 2017-02-10; Impact Factor (IF): 3.125; Type: Journal; Area: Fatigue Fracture Link: Click Here

  • Himangshu Bhowmik and Ruhul Amin; Efficiency improvement of flat plate solar collector using reflector; Energy Reports; 2017-01-11; Impact Factor (IF): 4.7; Type: Journal; Area: Thermal Engineering Link: Click Here

  • M. M. Rahman, A. B. M. T. Hasan, M. S. Rabbi; Effects of cavity size on the control of transonic internal flow around a biconvex circular arc airfoil; AIP Conference Proceedings, 1851, 020013; 2017-01-06; Type: Journal; Area: Fluid Dynamics

  • M. M. Rahman, K. Bashar, Y. KUDO, K. Kariya, A. Miyara; Experimental adiabatic two-phase pressure drop of R134a flowing inside a multiport minichannel; AIP Conference Proceedings, 1851, 020059; 2017-01-02; Type: Journal; Area: Thermal Engineering

  • Mohammad Zoynal Abedin, T. Tsuji, N. H. Kim; Higher-order and length-scale statistics of velocity and temperature fluctuations in turbulent boundary layer along a heated vertical flat plate; International Journal of Heat and Fluid Flow 65 (2017) 252-266.; 2017-01-01; Impact Factor (IF): 2.789; Type: Journal; Area: Thermo-Fluid Mechanics

  • Mohammad Zoynal Abedin, M. M. Islam, M. A. Hanif, M. J. Alam; Turbulent combined-convection boundary layer with aiding flows along a heated vertical flat plate at higher freestream velocity; International Conference on Mechanical Engineering, BUET, Dhaka, Bangladesh, 2016.; 2016-12-28; Type: Conference; Area: Thermo-Fluid Mechanics

  • Md. Masud Rana Khan, Md. Anowar Hossain, Hasan MM Afroz, Akio Miyara; Prediction of in-tube pressure drop of low gwp refrigerants during condensation and evaporation; The 7th BSME International Conference on Thermal Engineering (ICTE); 2016-12-22; Type: Conference; Link: Click Here

  • Mohammad Zoynal Abedin and Nae-Hyun Kim; An experimental study on accelerated fouling of aluminum oxide and ferric oxide particles in internally enhanced tubes; Journal of Mechanical Science and Technology, Volume 30, Year 2016, Pages 5707–5714.; 2016-12-15; Impact Factor (IF): 1.734; Type: Journal; Area: Thermal Engineering Link: Click Here

  • H.K. Imdadul, N W M Zulkifli, , H.H. Masjuki. M.A. Kalam, M. Kamruzzaman; M M Rashed, H.K. Rashedul and Azham Alwi; Experimental Assesment of Non-edible Candlenut Biodiesel and its blend characteristics as Diesel Engine Fuel; BMC Environmental Science and Pollution Research, Vol. 24, pp. 2350-2363, 04 Nov 2016.; 2016-11-04; Type: Journal; Area: Energy

  • Md. Zurais I Ashraf, Muhammad S Bashar, M. Kamruzzaman, A.K.M N Amin, Md. M Hossain; The surface morphology, chemical composition and crystallinity of the recast layer of wire-EDM modified extra low interstitials (Eli) Ti-6Al-4V alloy; Journal of Materials Processing Technology.; 2016-10-02; Impact Factor (IF): 1.6; Type: Journal; Area: Manufacturing

  • Md Mostafizur Rahman, Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Uttam Kumar Debnath, Md Arefin Kowser, Biplov Kumar Roy; Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD; International Journal of Surface Science and Engineering, Vol. 10, No. 3; 2016-10-01; Type: Journal; Area: Mechanical Engineering

  • D. J. Huggett, M. W. Dewan, M. A. Wahab, A. Okeil & T. W. Liao; Phased Array Ultrasonic Testing for Post-Weld and OnLine Detection of Friction Stir Welding Defects; Research in Nondestructive Evaluation; 2016-09-27; Type: Journal;

  • Saad B Aziz, Mohammad W Dewan, Daniel J Huggett, Muhammad A Wahab, Ayman M Okeil, T Warren Liao; Impact of friction stir welding (FSW) process parameters on thermal modeling and heat generation of aluminum alloy joints; Acta Metallurgica Sinica (English Letters); 2016-09-01; Type: Journal;

  • HK Imdadul, HH Masjuki, MA Kalam, NWM Zulkifli, Abdullah Alabdulkarem, M Kamruzzaman, MM Rashed; A comparative study of C4 and C5 alcohol treated diesel–biodiesel blends in terms of diesel engine performance and exhaust emission; Fuel, Volume 179, pp.281-288, 01 September 2016.; 2016-09-01; Type: Journal; Area: Energy

  • Md. Anowar Hossain, HMM Afroz, S. Talukder, A. Miyara; Prediction of condensation heat transfer of low GWP refrigerants inside smooth horizontal tube; AIP Conference Proceedings; 2016-07-12; Type: Journal; Link: Click Here

  • Md Anowar Hossain, Hasan MM Afroz, Shaon Talukder, Akio Miyara; Prediction of condensation heat transfer of low GWP refrigerants inside smooth horizontal tube; AIP Conference Proceedings, Vol:1754, Issue:1; 2016-07-12; Impact Factor (IF): 1; Type: Conference; Area: Refrigeration and Air conditioning Link: Click Here

  • Mohammad Zoynal Abedin, Mohammed Moinul Islam, Md. Abu Hanif and Md. Jahangir Alam; Turbulent combined-convection boundary layer with aiding flows along a heated vertical flat plate at higher freestream velocity; American Institute of Physics (AIP) Conference Proceedings, 1754, 050023 (2016); 2016-07-12; Impact Factor (IF): 0.402; Type: Journal; Area: Thermo-Fluid Mechanics Link: Click Here

  • Md. Zurais I Ashraf, Muhammad S Bashar, M. Kamruzzaman, A.K.M Nurul Amin, and Md. Mosharrof Hossain; Recast layer analysis and TiO2 rutile phase formation on Ti-6Al-4V Eli alloy surface by wire-EDM to enhance osseointegration; Surface and Coatings Technology.; 2016-06-30; Impact Factor (IF): 6.1; Type: Journal; Area: Manufacturing

  • M. M. Rahman, M. A. Chowdhury, D. M. Nuruzzaman, U. K. Debnath, Md. Arefin Kowser and Biplov Kumar Roy; Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD; International Journal of Surface Science and Engineering; 2016-06-20; Type: Journal; Area: Tribology. coating Link: Click Here

  • M. Mostafizur Rahman*, H. Bhowmik, S. Talukdar; Design and Optimization of a Radial Flow Heat Sink under Free Convection at Steady State Condition; Int. J. of Thermal & Environmental Engineering Volume 13, No. 2 (2016) 75-80; 2016-05-05; Impact Factor (IF): 1.2; Type: Journal; Area: Thermal Engineering

  • Md. Mostafizur Rahman, M.A. Chowdhury, D.M. Nuruzzaman, U.K. Debnath, M.A. Kowser, B.K. Roy; Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD.; International Journal of Surface Science and Engineering, 10 (2016) 282-302; 2016-03-02; Impact Factor (IF): 2.2; Type: Journal; Area: Materials Engineering

  • M. K. Bashar, Y. Kudo, M. M. Rahman, K. Kariya, A. Miyara; an experimental investigation on boiling and condensation heat transfer in multiport mini channel; The Japan Society of Refrigeration and Air Conditioning Annual Conference, 2016, Yokohama, Japan; 2016-02-18; Type: Conference; Area: Thermal Engineering

  • Mohammad W Dewan, Daniel J Huggett, T Warren Liao, Muhammad A Wahab, Ayman M Okeil; Prediction of tensile strength of friction stir weld joints with adaptive neuro-fuzzy inference system (ANFIS) and neural network; Materials & Design; 2016-02-15; Type: Journal;

  • M.M. Rashed, M.A. Kalam, H.H. Masjuki, M. Habibullah, H.K. Imdadul, M.M. Shahin, Md. Mostafizur Rahman; Improving oxidation stability and NOX reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine.; Industrial Crops and Products, 89 (2016) 273-284; 2016-02-05; Impact Factor (IF): 6.4; Type: Journal; Area: Energy Engineering

  • M. Rashed, H. Masjuki, M. Kalam, A. Alabdulkarem, Md. Mostafizur Rahman, H. Imdadul, H. Rashedul; Study of the oxidation stability and exhaust emission analysis of Moringa olifera biodiesel in a multi-cylinder diesel engine with aromatic amine antioxidants.; Renewable Energy, 94 (2016) 294-303; 2016-02-03; Impact Factor (IF): 8.6; Type: Journal; Area: Energy Engineering

  • Md. Mostafizur Rahman, S. Talukdar, M.A. Chowdhury, R. Khan, A.A. Masum, N. Islam; Effects of Acetylene on deposition rate of stainless steels using thermal chemical vapor deposition; International Journal of Engineering Research in Africa, 7-12; 2016-01-03; Impact Factor (IF): 1.8; Type: Journal; Area: Materials Engineering

  • Md. Anowar Hossain, HMM Afroz, S. Talukder, A. Miyara; Prediction of Condensation Heat Transfer of Low GWP Refrigerants inside Smooth Horizontal Tube; 11th International Conference on Mechanical Engineering (ICME); 2015-12-18; Type: Conference; Link: Click Here

  • A Sutradhar, M M Rashid, M H A Nahiyan and M K Mandal; Design and Construction of an Automatic System for Minimizing the Risk of Sinking of Water Vehicle; American Institute of Physics (AIP) Conference Proceedings 1754, 060006-1–060006-11, doi: 10.1063/1.4958447.; 2015-12-18; Type: Conference; Area: Control Engineering

  • Uttam Kumar Debnath, Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Md Mostafizur Rahman, Biplov Kumar Roy, Md Arefin Kowser, Md Monirul Islam; Erosion characteristics of Teflon under different operating conditions; Journal of Polymer Engineering, Volume -35; 2015-11-01; Type: Journal; Area: Polymer Engineering

  • Shibbir Ahmad and Mohammad Kamruzzaman; Analysis of Availability of Fire Fighting Equipment in Selected Knitting Garment Factories in Bangladesh; Proceedings of the 2015 International Conference on Operations Excellence and Service Engineering Orlando, Florida, USA, September 10-11, 2015.; 2015-09-10; Type: Conference; Area: Industrial Engineering

  • Mohammad W Dewan, MA Wahab and Ayman M Okeil; Influence of weld defects and postweld heat treatment of gas tungsten arc-welded AA-6061-T651 aluminum alloy; Journal of Manufacturing Science and Engineering; 2015-09-04; Type: Journal;

  • Md. Anowar Hossain, HMM Afroz, A. Miyara; Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube; Procedia Engineering; 2015-06-01; Type: Journal; Link: Click Here

  • Md Imran Hossen Khan, Hasan MM Afroz; Effect of phase change material on compressor on-off cycling of a household refrigerator; Science and Technology for the Built Environment,Volume 21, Issue 4,Pages 462-468; 2015-05-12; Impact Factor (IF): 1.7; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • D.M. Nuruzzaman, M.A. Chowdhury, Md. Mostafizur Rahman, M.A.Kowser, B.K. Roy; Experimental investigation on friction coefficient of composite materials sliding against SS 201 and SS 301 counter faces.; Procedia Engineering, 105 (2015) 858-864; 2015-03-03; Impact Factor (IF): 1.3; Type: Journal; Area: Materials Engineering

  • M. M. Rahman, A. B. M. T. Hasan, A. K. M. S. Islam, S. Matsuo, T. Setoguchi; Computation of transonic internal flow around a biconvex airfoil with cavity; Journal of Mechanical Science and Technology 29 (6), 2415-2421; 2015-02-16; Impact Factor (IF): 1.5; Type: Journal; Area: Fluid Dynamics

  • A.N.M. Mominul Islam Mukut, Mizunuma Hiroshi, Obara Hiromichi, Takehiko Segawa; Winglet Type Dielectric Barrier Discharge Plasma Actuators: Performance Characterization and Numerical Comparison; Procedia Engineering; 2015-02-15; Type: Journal; Area: Flow control

  • UK Debnath, M.A. Chowdhury, D.M. Nuruzzaman, Md. Mostafizur Rahman, B.K. Roy, M.A. Kowser, M.M. Islam; Erosion characteristics of Teflon under different operating conditions; Journal of Polymer Engineering, 35 (2015) 889-904; 2015-01-04; Impact Factor (IF): 1.6; Type: Journal; Area: Materials Engineering

  • Md Anowar Hossain, Hasan MM Afroz, Akio Miyara; Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube; Procedia Engineering,Volume 105, Pages 64-72; 2015-01-01; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • Dewan Muhammad Nuruzzaman, Mohammad Asaduzzaman Chowdhury, Md Mostafizur Rahman, Md Arefin Kowser, Biplov Kumar Roy; Experimental investigation on friction coefficient of composite materials sliding against SS 201 and SS 301 counterfaces; Procedia Engineering ,Volume 105; 2015-01-01; Type: Conference; Area: Mechanical Engineering

  • Md. Anowar Hossain, HMM Afroz, A. Miyara; Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube; 6th BSME International Conference on Thermal Engineering (ICTE); 2014-12-19; Type: Conference; Link: Click Here

  • Md. Anowar Hossain, HMM Afroz, A. Miyara; Two-phase frictional multiplier correlation for the prediction of condensation pressure drop inside smooth horizontal tube; 6th BSME International Conference on Thermal Engineering (ICTE); 2014-12-19; Type: Conference; Area: Condensation Heat Transfer Link: Click Here

  • A N M M I Mukut, H Mizunuma and O Hiromichi; Flow Separation Control Using Plasma Vortex Generator; Procedia Engineering; 2014-12-02; Type: Journal;

  • K. Sharmin, I. Schoegl; Two-step debinding and coextrusion of ceramic-filled PEBA and EVA blends; Ceramics International; 2014-11-08; Impact Factor (IF): 3.8; Type: Journal; Area: Ceramic Materials

  • Mohammad A Chowdhury, Dewan M Nuruzzaman, Md Arefin Kowser, Md MostafizurRahman, Biplov K Roy, Soma Chakraborty, Didarul Islam, MD Aktaruzzaman, Nur Mohammad; Sliding friction of steel combinations; The Open Mechanical Engineering Journal, Volume 8; 2014-10-09; Type: Journal; Area: Mechanical Engineering

  • Akio Miyara, Hasan MM Afroz, Md Anowar Hossain; In-tube condensation of low GWP mixture refrigerants R1234ze (E)/R32; International Heat Transfer Conference 15, August, 10-15, 2014, Kyoto, Japan, pages 737-750; 2014-10-08; Type: Conference; Area: Refrigeration and Air conditioning Link: Click Here

  • A. Miyara, H.M.M. Afroz, Md. Anowar Hossain; In-tube condensation of low GWP mixture refrigerants R1234ze(E) /R32; 15th International Heat Transfer Conference, IHTC-15; 2014-08-10; Type: Conference; Area: Refrigeration and Air Conditioning Link: Click Here

  • Md. Mostafizur Rahman, M. A. Kowser, M. K. Khalil, M. Islam, S. Reaza, A. Rahman, A. Islam,R. Alam, S. Rana; Design and Fabrication of Pump test Rig and Performance Analysis of Submersible (Domestic type) Pump; Proceedings of the 15th Annual Paper Meet, Institution of Engineers Bangladesh (IEB); 2014-07-02; Type: Conference; Area: Thermal Engineering

  • KhurshidaSharmin, IngmarSchoegl; Optimization of binder removal for thermoplastic co-extrusion of ceramic structures; Ceramics International; 2014-04-25; Impact Factor (IF): 3.8; Type: Journal; Area: Ceramic Processing

  • Md Imran Hossen Khan, Hasan MM Afroz; An experimental investigation of door opening effect on household refrigerator: The perspective in Bangladesh; Asian Journal of Applied Sciences, Vol:7 Issue:2, pp. 79-87.; 2014-03-12; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • Md Imran Hossen Khan, HM Afroz; Diminution of temperature fluctuation inside the cabin of a household refrigerator using phase change material; International Journal of Recent advances in Mechanical Engineering (IJMECH), Vol:3, Issue:01, Pages:43-52; 2014-02-10; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • H. Bhowmik; Review on convection heat transfer in channel flow with discrete heater arrays for electronic cooling; DUET; 2014-02-08; Type: Journal; Area: Thermal Engineering

  • M. M. Rahman, M. A. Kowser, M. K. Khalil, M. Islam, S. Reaza, A. Rahman, A. Islam,R. Alam, S. Rana,; Design and Fabrication of Pump test Rig and Performance Analysis of Submersible (Domestic type) Pump,; Proceedings of the 15th Annual Paper Meet, Institution of Bangladesh (IEB), Dhaka,; 2014-02-07; Type: Conference; Area: Fluid Mechanics

  • Mohammad A. Chowdhury, Dewan M. Nuruzzaman, Md. Arefin Kowser, Md. Mostafizur Rahman, Biplov K. Roy, Soma Chakraborty, Md. Didarul Islam, Md. Aktaruzzaman, Nurmohammad; Sliding Friction of Steel Combinations; Open Mechanical Engineering Journal, 8(2014) 364-369; 2014-02-05; Impact Factor (IF): 1,2; Type: Journal; Area: Materials Engineering

  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Md. Arefin Kowser, Md. Mostafizur Rahman, Biplov Kumar Roy, Soma Chakraborty, Sagir Hossen, Imam Uddin and Selim Hossain; Frictional Behavior of Polymers Sliding Against Smooth and Rough Mild Steel Counter Faces; Middle East Journal of Scientific Research, 21 (2014) 477-486; 2014-02-04; Impact Factor (IF): 1.0; Type: Journal; Area: Materials Engineering

  • Mohammad W Dewan, Jiandong Liang, MA Wahab, Ayman M Okeil; Effect of post-weld heat treatment and electrolytic plasma processing on tungsten inert gas welded AISI 4140 alloy steel; Materials & Design; 2014-02-01; Type: Journal;

  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, A Kowser, M Rahman, BK Roy, S Chakraborty, S Hossen, I Uddin, S Hossain; Frictional behavior of polymers sliding against smooth and rough mild steel counter faces; Middle-East Journal of Scientific Research, volume 21; 2014-02-01; Type: Journal; Area: Mechanical Engineering

  • Md. Arefin Kowser, Md. Omar Faroque Sarker, Md. Khaled Khalil; Enhancement of Heat Transfer by Using Different Types of Fin at Constant Temperature and at Constant Heat Flux; 6th BSME International Conference on Thermal Engineering, IUT, Gazipur, Bangladesh; 2014-01-06; Type: Conference; Area: Thermal Engineering

  • Md. Arefin Kowser, Md. Alim adsha, Nayeem Md. Lutful Huq, Md. Khaled Khalil, Hasan Mohammad Mostofa Afroz, Zulfikar Hossain,; Fabrication and Performance Test of Continuous Flow Down Draught Gasifier for Wood Gasification System,; 6th BSME International Conference on Thermal Engineering ,IUT, Gazipur, Bangladesh; 2014-01-06; Type: Conference; Area: Thermal Engineering

  • Md Masum Billah, Nayeem Md Lutful Huq, Mad Helmi, Syed Masrur Ahmmed; Investigation on data extraction trends for snake robot; Procedia Computer Science; Volume 42; Issue 2014; 2014-01-01; Impact Factor (IF): 1.1; Type: Journal; Area: Robotics Link: Click Here

  • Himangshu Bhowmik; Optimization of a radial flow heat sink under natural convection; DUET; 2014-01-01; Impact Factor (IF): 0.7; Type: Journal; Area: Thermal Engineering

  • MA Chowdhury, DM Nuruzzaman, BK Roy, N Ch Sorker, R Karim, M Hasan, S Mia; Experimental Study on Friction Coefficient and Wear Rate of Gun Metal Sliding Against Different Counterface Materials; Journal of the Balkan Tribological Association, Volume 20; 2014-01-01; Type: Journal; Area: Tribology

  • MA Chowdhury, DM Nuruzzaman, MAK Chowdhury, BK Roy; Experimental study of friction coefficient and wear rate of turned and ground mild steel surfaces sliding against smooth and rough SS304 counterfaces; Australian Journal of Mechanical Engineering, Volume 12; 2014-01-01; Type: Journal; Area: Mechanical Engineering

  • MR Khan, NML Huq, MM Billah, SM Ahmmad; Design and Development of Mopping Robot-'HotBot'; IOP Conference Series: Materials Science and Engineering; Volume 53; Issue 1; 2013-12-20; Type: Journal; Area: Robotics Link: Click Here

  • MD IMRAN HOSSEN KHAN, Hasan MM Afroz; Experimental investigation of performance improvement of household refrigerator using phase change material; International journal of air-conditioning and refrigeration,Vol. 21, No. 04, 1350029 (2013); 2013-12-10; Impact Factor (IF): 0.8; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • Mohammad Zoynal Abedin and M. M. Islam; Design, fabrication and performance analysis of an evaporative cooler; 15th Annual Paper Meet 2013, Mechanical Engineering Division, The Institute of Engineers, Bangladesh, Dhaka, 06-07 December 2013.; 2013-12-06; Type: Conference; Area: Thermal Engineering

  • M. A. Hamid, S. M. Alimuzzaman, M. M. Rahman, A.B.M. T. Hasan; A Numerical Investigation on Transonic Flow around a Biconvex Circular Arc Airfoil in a Channel; The 14th Asian Congress of Fluid Mechanics, October 2013, Hanoi, Vietnam.; 2013-11-20; Type: Conference; Area: Fluid Dynamics

  • Himangshu Bhowmik; Analysis of mixed convection heat transfer from flush-mounted discrete heat sources; DUET; 2013-11-08; Type: Journal; Area: Thermal Engineering

  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Biplov Kumar Roy, Rajib Nandee; Friction Coefficient of Copper Mating with Smooth and Rough Mild Steel Counterfaces; International Conference on Mechanical, Industrial and Materials Engineering, 2013; 2013-11-03; Type: Conference; Area: Mechanical Engineering Link: Click Here

  • Hasan MM Afroz Md Imran Hossein Khan; Effect of phase change material on performance of a household refrigerator; Asian Journal of Applied Sciences, vol:6, issue:02, pages: 56-67; 2013-11-02; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • Md. Anowar Hossain, A. Miyara, M.Z. Sarkar, M.J. Alam; Investigation of Condensation Heat Transfer Characteristics for R1234ze(E), R32, R410A and Zeotropic Mixture of R1234ze(E) and R32 inside Smooth Tube; Int. Conf. on Mech., Industrial and Materials Engg. (ICMIME); 2013-11-01; Type: Conference; Area: Condensation Heat Transfer Link: Click Here

  • Md Imran Hossen Khan, Hasan MM Afroz, Md Mostafizur Rahman; Enhancement of higher evaporating temperature of household refrigerator using phase change material; International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), Paper ID: TE-03; 2013-11-01; Type: Conference; Area: Refrigeration and Air conditioning Link: Click Here

  • H.M.M. Afroz, Md. Anowar Hossain, A. Miyara; Analysis of condensation heat transfer characteristics of zeotropic refrigerant mixture R1234ze/R32 inside a Horizontal Smooth tube; The Proceedings of the Thermal Engineering Conference 2013; 2013-10-18; Type: Conference; Area: Condensation Heat Transfer Link: Click Here

  • Hasan M.M. Afroz, Anowar Hossain, Akio Miyara; F226 Analysis of condensation heat transfer characteristics of zeotropic refrigerant mixture R1234ze/R32 inside a Horizontal Smooth tube; The Proceedings of the Thermal Engineering Conference, 2013, Volume 2013, Session ID F226, Pages 387-388; 2013-10-18; Type: Conference; Area: Refrigeration and Air conditioning Link: Click Here

  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Biplov Kumar Roy, Asraful Islam, Zakir Hossain, Md Rakibul Hasan; Experimental investigation of friction coefficient and wear rate of stainless steel 202 sliding against smooth and rough stainless steel 304 counter-faces; Friction and wear research, volume 1; 2013-10-01; Type: Journal; Area: Tribology

  • Nayeem Md. Lutful Huq, Abdi O. Shuriye; Technological Co-Operation and Contribution among OIC Members with Special Reference to Bangladesh and Iraq; Journal of Educational and Social Research; Volume 3; Issue 3; 2013-09-03; Impact Factor (IF): 0.675; Type: Journal; Area: Education and Social Research Link: Click Here

  • Md Imran Hossen Khan, Hasan MM Afroz, Md Abdur Rohoman, Mohammad Faruk, Mohammad Salim; Effect of different operating variables on energy consumption of household refrigerator; International Journal of Energy Engineering, vol: 3, issue: 4, page: 144; 2013-08-01; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • A. Miyara, Md. Anowar Hossain, H.M.M. Afroz, K. Shagawa; Condensation and evaporation heat transfer of R1234ze(E)/R32 mixture in a horizontal smooth tube; 4th IIR Conference on Thermophysiscal Properties and Transfer Processes of Refrigerants, TP-032; 2013-06-17; Type: Conference; Area: Refrigeration and Air Conditioning Link: Click Here

  • MIYARA A., HOSSAIN M. A., AFROZ H. M. M.; Condensation and evaporation heat transfer of R1234ze(e)/R32 mixture in a horizontal smooth tube; 4th IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, TP-032; 2013-06-17; Type: Conference; Area: Refrigeration and Air conditioning Link: Click Here

  • A.N.M. Mominul Islam Mukut, Mizunuma Hiroshi, Obara Hiromichi, Takehiko Segawa; Flow Characteristics Induced by Winglet-Type Plasma Actuators; Journal of Fluid Science & Technology, Japan Society of Mechanical Engineers; 2013-04-12; Type: Journal;

  • Md. Imran Hossen Khan, Hasan. M.M. Afroz, Md. Mostafizur Rahman; Enhancement of Higher Evaporating Temperature of Household Refrigerator Using Phase Change Material; International Conference on Mechanical, Industrial and Material Engineering (ICMIME 2013); 2013-03-03; Type: Conference; Area: Thermal Engineering

  • Md. Anowar Hossain, Y. Onaka, H.M.M. Afroz, A. Miyara; Heat transfer during evaporation of R1234ze(E), R32, R410A and a mixture of R1234ze(E) and R32 inside a horizontal smooth tube; International Journal of Refrigeration; 2013-03-01; Type: Journal; Link: Click Here

  • Md Anowar Hossain, Yoji Onaka, Hasan MM Afroz, Akio Miyara; Heat transfer during evaporation of R1234ze (E), R32, R410A and a mixture of R1234ze (E) and R32 inside a horizontal smooth tube; International journal of refrigeration, vol:36, issue:02, pages: 465-477; 2013-03-01; Impact Factor (IF): 3.5; Type: Journal; Area: Refrigeration and Air conditioning Link: Click Here

  • MA Chowdhury, DM Nuruzzaman, BK Roy, S Samad; Experimental investigation of friction coefficient and wear rate of composite materials sliding against smooth and rough mild steel counterfaces; Tribology in industry, Volume 35; 2013-03-01; Type: Journal; Area: Tribology Link: Click Here

  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Biplov Kumar Roy, Muhammad Mahmudur Rahman, Md Abul Kalam Azad, Md Mijanur Rahman, Shazib Bhumik; Friction Coefficient and Wear Rate of Copper Mating with Smooth and Rough Stainless Steel 304 Counterfaces; Journal of American Science, Volume 9; 2013-03-01; Type: Journal; Area: Mechanical Engineering

  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Biplov Kumar Roy, Palash Kanti Dey, Mohammad Golam Mostafa, Mohammad Shahidul Islam, Md Rashed Mia; Experimental investigation on friction and wear of stainless steel 304 sliding against different pin materials; World Applied Sciences Journal, Volume 22; 2013-03-01; Type: Journal; Area: Engineering Link: Click Here

  • M. W. Dewan, J. Liang, M. Wahab, A. Okeil; Post-weld residual stresses and heat treatments of gas tungsten arc welded aluminum alloy AA6061-T651; World Journal of Engineering; 2013-02-19; Type: Journal;

  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Biplov Kumar Roy, Md Mostafizur Rahman, Md Shahin Mia, Md Rashed Mia, Shazib Bhumik; Biplov Kumar Roy, PhD Experimental investigation of friction coefficient and wear rate of different sliding pairs; World Applied Sciences Journal, volume 28; 2013-02-01; Type: Journal; Area: Mechanical Engineering

  • Mohammad Kamal Hossain, Muhammad Enayet Hossain, Mohammad Washim Dewan, Mahesh Hosur, Shaik Jeelani; Effects of carbon nanofibers (CNFs) on thermal and interlaminar shear responses of E-glass/polyester composites; Composites Part B: Engineering; 2013-01-01; Type: Journal;

  • Mohammad CHOWDHURY, Dewan NURUZZAMAN, ROY Biplov; Experimental investigation of friction coefficient and wear rate of stainless steel 304 sliding against smooth and rough mild steel counterfaces; Gazi University Journal of Science, Volume 26; 2013-01-01; Type: Journal; Area: Mechanical Engineering Link: Click Here

  • J. B. Yoon, K. J. Seong, J. Lee, Mohammad Zoynal Abedin; Transient thermo-solutal convection of water near 4c with the same gradients in a square cavity; 8th KSME-JSME Thermal and Fluid Engineering Conf., Inchon, Korea, GST06-011, 2012, pp. 1-4.; 2012-12-27; Type: Conference; Area: Thermo-Fluid Mechanics

  • A.N.M. Mominul Islam Mukut, Mizunuma Hiroshi, Obara Hiromichi, Takehiko Segawa; Numerical and Experimental Investigation of Winglet Plasma Actuators; The 5th BSME International Conference on Thermal Engineering, 2012; 2012-12-12; Type: Conference; Area: Flow control

  • A N M M I Mukut, H M M Afroz, H Mizunuma and O Hiromichi,; Control of Boundary Layer Separation by Means of Vortex Generator; Japan Society of Mechanical Engineers, General Assembly 2012, Paper ID: S056022; 2012-11-11; Type: Conference; Area: Flow control

  • Mohammad Washim Dewan, Mohammad Kamal Hossain, Mahesh Hosur, Shaik Jeelani; Thermomechanical properties of alkali treated jute‐polyester/nanoclay biocomposites fabricated by VARTM process; Journal of Applied Polymer Science; 2012-10-17; Type: Journal;

  • Khurshida Sharmin, Mohamed A Abdalla and Heshmat A Aglan; Effect of Fumed Silica Nanoparticles on the Proton Conductivity of PolyimidePhosphoric Anhydride Membranes; Journal of Elastomers & Plastics; 2012-10-12; Impact Factor (IF): 1.2; Type: Journal; Area: Electrolyte Membrane

  • Chowdhury Nusrat T., Kamruzzaman M. and Dhar N.R.; Experimental Study on Hard Turning of Hardened Medium Carbon Steel with Carbide Insert under High-Pressure Coolant Condition; Vol.12(1/2), pp.66-75, 2012. Published 17.08.2012. https://doi.org/10.1504/IJMMM.2012.048558; 2012-08-17; Impact Factor (IF): 4.8; Type: Journal; Area: Manufacturing

  • Md. Anowar Hossain, Y. Onaka, A. Miyara; Heat transfer during evaporation of refrigerants R1234ze(E), R32, R410A and mixture of R1234ze(E) and R32 inside horizontal smooth tube; ECI 8th Int. Conf. on Boiling and Condensation Heat Transfer; 2012-06-03; Impact Factor (IF): 3.461; Type: Conference; Area: Evaporation Heat Transfer Link: Click Here

  • Md. Anowar Hossain, Y. Onaka, A. Miyara; Experimental study on condensation heat transfer and pressure drop in horizontal smooth tube for R1234ze(E), R32 and R410A; International Journal of Refrigeration; 2012-06-01; Type: Journal; Link: Click Here

  • Jung-Bae Yoon, Kyoung Jin Seong, Mohammad Zoynal Abedin, P. Kandaswamy and Jinho Lee; Transient thermosolutal convection of Boussinesq fluid with moving heating and cooling blocks in a square cavity; Taylor and Francis, Numerical Heat Transfer, Part A, Volume 61(8), Year 2012, Pages 594-63.; 2012-05-11; Impact Factor (IF): 2.928; Type: Journal; Area: Thermo-fluid Engineering

  • Mohammad Zoynal Abedin, Toshihiro Tsuji and Jinho Lee; Effects of freestream on transition behaviors and turbulence characteristics of thermally-driven boundary layers along a heated vertical flat plate; International Journal of Heat and Fluid Flow, Volume 36, August 2012, Pages 92-100.; 2012-04-24; Impact Factor (IF): 2.789; Type: Journal; Area: Thermo-Fluid Mechanics

  • Md. Anowar Hossain, Y. Onaka, A. Miyara; Condensation Heat Transfer of Refrigerant Mixture R1234ze(E)/ R32 inside a Horizontal Smooth Tube; KSME-JSME 2012 - 8th KSME-JSME Thermal and Fluids Engineering Conference; 2012-03-18; Type: Conference; Area: Condensation Heat Transfer Link: Click Here

  • N. M. Huq, A. M. Afsar; A Mathematical Model for the Analysis of Elastic Field in a Stiffened Cantilever of Laminated Composite; Advances in Mechanical Engineering; Volume 4; 2012-01-01; Impact Factor (IF): 1.316; Type: Journal; Area: Applied Mechanics Link: Click Here

  • Mohammad Zoynal Abedin, Toshihiro Tsuji and Jinho Lee; Turbulence characteristics and vortical structures in combined-convection boundary layers along a heated vertical flat plate; International Journal of Heat and Mass Transfer, Volume 55 (15-16), Year 2012, Pages 3995-4002.; 2012-01-01; Impact Factor (IF): 5.584; Type: Journal; Area: Turbulence in boundary layer flow

  • Y. Onaka, Md. Anowar Hossain, A. Miyara; Heat transfer and pressure drop of R1234ze(E) and R32 during condensation and evaporation in horizontal smooth tube; Transactions of the Japan Society of Refrigerating and Air Conditioning Engineers; 2011-12-31; Type: Journal; Link: Click Here

  • A N M M I Mukut, H M M Afroz, H Mizunuma and O Hiromichi; PIV Measurements of Flow Characteristics Induced by Mini Plate-Wing Plasma Actuators; Proceedings of JSME Fluids Engineering Division Conference (ID-1312; 377-8); 2011-11-10; Type: Conference; Area: Flow control

  • Mohammad K Hossain, Mohammad W Dewan, Mahesh Hosur, Shaik Jeelani; Effect of surface treatment and nanoclay on thermal and mechanical performances of jute fabric/biopol ‘green’composites; Journal of reinforced plastics and composites; 2011-11-01; Type: Journal;

  • MK Hossain, MW Dewan, MV Hosur, S Jeelani; Physical, mechanical, and degradability properties of chemically treated jute fiber reinforced biodegradable nanocomposites; Journal of engineering materials and technology; 2011-10-13; Type: Journal;

  • Mohammad K Hossain, Mohammad W Dewan, Mahesh Hosur, Shaik Jeelani; Mechanical performances of surface modified jute fiber reinforced biopol nanophased green composites; Composites Part B: Engineering; 2011-09-01; Type: Journal;

  • M.M. Islam, Mohammad Zoynal Abedin, M. A. H. Mia and M. Z. Haq; Exergy analysis of DI diesel engine running on straight soybean oil; 1st International Conference on Mechanical Engineering and Renewable Energy (ICMRE), CUET, Chittagong, 2011, CD-ROM of ICMERE-2011.; 2011-06-01; Type: Conference; Area: Thermal Engineering

  • Y. Onaka, Md. Anowar Hossain, A. Miyara; Condensation and Evaporation Heat Transfer of HFO-1234ze(E) in Horizontal Smooth Tube; 10th IEA Heat Pump Conference 2011; 2011-05-16; Type: Conference; Area: Refrigeration and Air Conditioning Link: Click Here

  • Mohammad Anisur Rahman, Md. Moinul Islam and Mohammad Zoynal Abedi; Rights & Obligations of Contracting Parties in Engineering Contracts in Bangladesh; International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS; 2011-02-01; Impact Factor (IF): 1.272; Type: Journal; Area: Engineering

  • Md. Moinul Islam, Mohammad Anisur Rahman and Mohammad Zoynal Abedin; First Law Analysis of a DI Diesel Engine Running on Straight Vegetable oil; International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS; 2011-01-03; Impact Factor (IF): 1.272; Type: Journal; Area: Thermal Engineering

  • Md. Arefin Kowser, Yoshio ARAI, Wakako ARAKI; Asymptotic Analysis for the Singular Stress Behaviour around an Interface Edge of Dissimilar Power-law Hardening Materials Joint; Key Engineering Materials; 2011-01-01; Type: Journal; Area: Interface FractureMechanics Link: Click Here

  • Mohammad Zoynal Abedin, Toshihiro Tsuji; Transition behavior and turbulence characteristics in combined-convection boundary layers along a heated vertical flat plate; 13 Asian Congress Fluid Mechanics, Dhaka, Bangladesh, 2010, pp. 759-762.; 2010-12-28; Type: Conference; Area: Thermo-Fluid Mechanics

  • Kamruzzaman, M. and Dhar, N. R.; Performance Evaluation of HPC in Turning AISI 4320 Steel and AISI 4140 Steel; Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, Bangladesh, MIE10-154, pp.1-6, 28 December, 2010.; 2010-12-28; Type: Conference; Area: Manufacturing

  • Chowdhury,M.A Nuruzzaman,DM, Khalil,M.K Rahaman, M.L,; Influence of Sliding Speed and Normal Load on The Coefficient of friction and Wear Rate of Aluminum Sliding against Stainless Steel; International Conference on Mechanical, Industrial and Energy Engineering; 2010-12-24; Type: Conference; Area: Tribology

  • Nuruzzaman,DM Rahaman, M.L, Chowdhury,M.A Khalil,M.K; Variation of friction coefficient with duration of rubbing and sliding velocity for different material; International Conference on Mechanical, Industrial and Energy Engineering; 2010-12-23; Type: Conference; Area: Tribology

  • Md. Anowar Hossain, Y. Onaka, A. Miyara, K. Tsubaki; Evaporation heat transfer and pressure drop of CO2/DME mixture in a horizontal tube; International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE2010); 2010-12-23; Type: Conference; Area: Evaporation Heat Transfer Link: Click Here

  • Mohammad Zoynal Abedin, Toshihiro Tsuji; Effects of freestream on thermally-driven boundary layers along a heated vertical flat plate; 14th International Heat Transfer Conference, Washington DC, USA, 2010, TRK-20 of CD-ROM, pp. 1-8.; 2010-12-10; Type: Conference; Area: Thermo-Fluid Mechanics

  • A.N.M. Mominul Islam Mukut, Mizunuma Hiroshi, Obara Hiromichi, Takehiko Segawa; PIV Measurements of Flow Characteristics Induced by Mini Plate-Wing Plasma Actuators; The 63rd Annual Meeting of the American Physical Society's Division of Fluid Dynamics (DFD), Long Beach, California, 2010; 2010-11-10; Type: Magazine; Area: Flow control

  • Mohammad Zoynal Abedin, T. Tsuji, J. Hamadate; Direct numerical simulation of mixed-convection boundary layer in water along a heated vertical flat plate; 47th National Heat Transfer Symposium of Japan, Hokkaido, Vol. 1 No. H 332, 2010, pp. 687-688.; 2010-10-01; Type: Conference; Area: Thermo-Fluid Mechanics

  • Md. Arefin KOWSER, Yoshio ARAI, Wakako ARAKI; An Iteration Method For Singular Fields around An Interface Edge of Elastic/Power-Law Hardening Materials Joint; Journal of Solid Mechanics and Materials Engineering; 2010-10-01; Type: Journal; Area: Interface Edge, Stress Singularity, Elastic-plastic Material, Dissimilar Joint, Iteration Method Link: Click Here

  • Mohammad Zoynal Abedin, T. Tsuji; Structural characteristics of turbulent combined-convection boundary layers along a vertical flat plate; 7th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Antalya, Turkey, 2010, CD-ROM of HEFAT 2010, pp. 2175-2180.; 2010-08-01; Type: Conference; Area: Thermo-Fluid Mechanics

  • Kamruzzaman, M. and Dhar, N. R.; Effect of High-Pressure Coolant on Temperature, Chip, Force, Tool Wear, Tool Life and Surface Roughness in Turning AISI 1060 Steel”,; GU Journal of Science, 2009. Published 27.03.2010; 2010-03-27; Impact Factor (IF): 1.38; Type: Journal; Area: Manufacturing

  • Mohammad Zoynal Abedin, Toshihiro Tsuji and Yasuo Hattori; Direct numerical simulation for a time-developing combined-convection boundary layer along a vertical flat plate; International Journal of Heat and Mass Transfer, Volume 53 (9-10), Year 2010, Pages 2113–2122.; 2010-01-29; Impact Factor (IF): 5.584; Type: Journal; Area: Thermo-Fluid Mechanics

  • Kamruzzaman, M. and Dhar, N. R.; Effects of High-Pressure Coolant (HPC) Jet on Temperature, Chips and Forces in Turning AISI 1060 Steel and AISI 4320 Steel; Proceedings of the International Conference on Mechanical Engineering (ICME-2009), Bangladesh, pp. 1-7, 29 December, 2009.; 2009-12-29; Type: Conference; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; Performance Evaluation of Carbide Inserts in Turning C-60 Steel and 42CrMo4 Steel under High-Pressure Coolant (HPC) Condition; Proceedings of the International Conference on Mechanical Engineering (ICME-2009), Bangladesh, pp. 1-7, 29 December, 2009.; 2009-12-29; Type: Conference; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; The Effect of Applying High-Pressure Coolant (HPC) Jet in Machining of 42CrMo4 Steel by Uncoated Carbide Inserts; Journal of Mechanical Engineering, IEB, Dhaka, V0l. 20(2), pp. 23-32, 27 December 2009.; 2009-12-27; Type: Journal; Area: Manufacturing

  • K. Sharmin, R. Roy, S. Akhter and M.A. Islam; Operational and pressure characteristics of a thermoloop device; Proceedings of the International Conference in Mechanical Engineering, 2009, ICME09-TH-14; 2009-12-27; Type: Conference; Area: Thermal

  • Mohammad Zoynal Abedin, T. Tsuji, Y. Saiki, Y. Hattori; Direct numerical simulation for turbulent natural- and mixed-convection boundary layer along a vertical flat plate; 46th National Heat Transfer Symposium of Japan, Kyoto, Vol. 1 No. J-131, 2009, pp. 325 - 326.; 2009-12-15; Type: Conference; Area: Thermo-Fluid Mechanics

  • Y. Saiki, T. Tsuji, Mohammad Zoynal Abedin; Direct numerical simulation for turbulent combined-convection boundary layers along a vertical heated plate; 58th Annual Paper Meet in Tokai Branch, Gifu, Japan, Vol. 093-1 No. 710, 2009, pp. 417 – 418.; 2009-12-01; Type: Conference; Area: Thermo-Fluid Mechanics

  • Kamruzzaman, M. and Dhar, N. R.; Prediction of Chip and Tool Temperature in Turning C-60 Steel under High-Pressure Coolant Conditions; International Journal of Manufacturing Research (IJMR), 2009. Published 14 November 2009.; 2009-11-14; Type: Journal; Area: Manufacturing

  • H.M.M. Afroz, A. Miyara, Md. Anowar Hossain; Two-phase frictional multiplier for the prediction of evaporation pressure drop inside Herringbone microfin tubes; JSRAE Annual Conference; 2009-10-21; Type: Conference; Area: Evaporation Heat Transfer Link: Click Here

  • AM Afsar, NML Huq, JI Song; Displacement potential solution to elastic field in a stiffened cantilever of laminated composite; ICCM-17 - 17th International Conference on Composite Materials; 2009-07-27; Type: Conference; Area: Applied Mechanics Link: Click Here

  • Kamruzzaman, M. and Dhar, N. R.; The Influence of High Pressure Coolant on Temperature Tool Wear and Surface Finish in Turning 17CrNiMo6 And 42CrMo4 Steels; J Eng Appl Sci, Vol.4 (6), pp. 93-103, 2009. Published 20.07.2009.; 2009-07-20; Impact Factor (IF): 1.098; Type: Journal; Area: Manufacturing

  • Mohammad Zoynal Abedin, Toshihiro Tsuji and Yasuo Hattori; Direct numerical simulation for a time-developing natural-convection boundary layer along a vertical flat plate; International Journal of Heat and Mass Transfer, Volume 52 (19-20), Year 2009, Pages 4525–4534.; 2009-05-23; Impact Factor (IF): 5.584; Type: Journal; Area: Thermo-Fluid Mechanics

  • A. M. Afsar, N. M. L. Huq & J. I. Song; Analytical solution to a mixed boundary value elastic problem of a roller-guided panel of laminated composite; Archive of Applied Mechanics; 2009-04-30; Impact Factor (IF): 1.976; Type: Journal; Area: Applied Mechanics Link: Click Here

  • H. Bhowmik and Kwan-Soo Lee; Analysis of heat transfer and pressure drop characteristics in an offset strip fin heat exchanger; DUET; 2009-03-08; Impact Factor (IF): 3.9; Type: Journal; Area: Thermal Engineering

  • Kamruzzaman, M. and Dhar, N. R.; The Effect of Applying High-Pressure Coolant (HPC) Jet in Machining of 42CrMo4 Steel by Uncoated Carbide Inserts; Engineering Materials Science, Published 14 January 2009, DOI:10.3329/JME.V39I2.1849, Corpus ID: 110029218; 2009-01-14; Type: Journal; Area: Manufacturing

  • Chowdhury, M.A., Nuruzzaman, D.M, Rahaman, M.L.,Khalil,M.K; Variation of Thin Film Deposition Rate on SS314 with the Variation of Gas Flow Rate Using CVD; Industrial Lubrication and Tribology (Emerald Publication),England; 2009-01-06; Type: Journal; Area: Tribology

  • Kamruzzaman, M. and Dhar, N. R.; Effect of High-Pressure Coolant on Temperature, Chip, Force, Tool Wear, Tool Life and Surface Roughness in Turning AISI 1060 Steel; Gazi University Journal of Science, Vol.24(4), pp.359-370, 2009.; 2009-01-01; Impact Factor (IF): 1.38; Type: Journal; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; The Effect of Applying High-Pressure Coolant (HPC) Jet in Machining of 42CrMo4 Steel by Uncoated Carbide Inserts; Journal of Mechanical Engineering, IEB, Dhaka, V0l. 20(2), pp. 23-32, 2009.; 2009-01-01; Type: Journal; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; Prediction of Chip and Tool Temperature in Turning C-60 Steel under High-Pressure Coolant Conditions; International Journal of Manufacturing Research (IJMR), 2009.; 2009-01-01; Impact Factor (IF): 1.11; Type: Journal; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; Prediction of Chip and Tool Temperature in Turning C-60 Steel under High-Pressure Coolant Conditions; International Journal of Manufacturing Research (IJMR), 2009.; 2009-01-01; Impact Factor (IF): 1.11; Type: Journal; Area: Manufacturing

  • Kamruzzaman M., Chowdhury M.M.H. and Dhar N.R.; Effect of High-Pressure Coolant (HPC) Jet in Machining AISI 1060 Steel by Uncoated Carbide Insert; Proceedings of the 2nd Intl. and 23rd AIMTDR conf., Chennai, India, pp.679-684, 29 December, 2008.; 2008-12-29; Type: Conference; Area: Manufacturing

  • A N M Mominul Islam Mukut, M Q Islam and M M Alam; Estimation of Wind Energy Potential in Coastal Areas of Bangladesh by Using Weibull Distribution; Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering 2008; 2008-12-11; Type: Conference; Area: Energy

  • A.N.M. Mominul Islam Mukut, M Q Islam and M M Alam; Prospect of Wind Energy in the Coastal Belt of Bangladesh; Pacific Journal of Science and Technology, 9(2), 442-451.; 2008-12-06; Type: Journal; Area: Energy

  • Kamruzzaman, M. and Dhar, N. R.; Machining of AISI 4230 Steel with Uncoated Carbide Tools with Various Coolant Supply Pressure; Journal of Materials Processing Technology, 2008. Published 03 July 2008.; 2008-07-03; Impact Factor (IF): 1.6; Type: Journal; Area: Manufacturing

  • A N M Mominul Islam Mukut, M Q Islam and M M Alam; Analysis of Wind Characteristics in Coastal Areas of Bangladesh; Journal of Mechanical Engineering (IEB Journal), ME39(1), 45-49; 2008-05-10; Type: Journal; Area: Energy

  • Md. Anowar Hossian, ManBae Lim, SunChul Huh, WonJo Park; A Study on Fatigue Crack Propagation Properties Using the X-Ray Diffraction Method; Materials Science Forum; 2008-04-08; Type: Journal; Link: Click Here

  • Kamruzzaman, M. and Dhar, N. R.; Role of High-pressure Coolant on Cutting Temperature in Turning Steels; Journal of Manufacturing Science and Engineering, 2008. Published 30.03.2008.; 2008-03-30; Type: Journal; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; The Effect of Applying High Pressure Coolant on Temperature, Force, Chips and Product Quality in Machining C-60 Steel with SNMM Insert; Proceedings of 12th Annual Paper Meet, The Institution of Engineers, Mechanical Engineering Division, Bangladesh, Paper ID: 189-Ex 10, pp.1-8, 27 February, 2008.; 2008-02-27; Type: Conference; Area: Manufacturing

  • Dhar N.R. and Kamruzzaman, M.; Effect of High-Pressure Coolant on Tool Wear, Tool Life and Surface Roughness in Turning Medium Carbon Steel by SNMG Insert; 9th Cairo University International Conference on Mechanical Design and Production (MDP-9), Cairo, pp. 555-565, 15 January, 2008.; 2008-01-15; Type: Conference; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; Machining of AISI 4230 Steel with Uncoated Carbide Tools with Various Coolant Supply Pressure; Journal of Materials Processing Technology, 2008; 2008-01-01; Impact Factor (IF): 1.6; Type: Journal; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; An Experimental Study of Effect of High-Pressure Coolant on Tool Wear, Tool Life and Roughness in Turning 16MnCr5 steel by SNMG Insert; Proceedings of the International Conference on Mechanical Engineering (ICME-2007), Bangladesh, Paper ID: AM-33, pp.1-7, 28 December, 2007.; 2007-12-29; Type: Conference; Area: Manufacturing

  • Dhar, N. R. and Kamruzzaman, M.; Effect of High-Pressure coolant on Tool Wear, Tool Life and Surface Roughness in Turning Medium carbon steel by SNMG Insert; Proceedings of the International Conference on Mechanical Engineering 2007 (ICME2007), 29- 31 December 2007, Dhaka, Bangladesh; 2007-12-29; Type: Conference; Area: Manufacturing

  • Nayeem Md Lutful Huq, Md. Afsar Ali; Analysis of elastic field in structural elements of laminated composites by displacement potential approach; Department of Mechanical Engineering, BUET, Dhaka; 2007-12-24; Type: Conference; Area: Applied Mechanics

  • A N M Mominul Islam Mukut, M Q Islam and M M Alam; THE WIND ENERGY SCENARIO IN COASTAL REGION OF BANGLADESH; Proceedings of the International Conference on Mechanical Engineering 2007; 2007-12-12; Type: Conference; Area: Energy

  • Md. Anowar Hossian, W.J. Park; Buckling of Short Columns having Non-Symmetric Responses in Tension and Compression; The Korean Society of Mechanical Engineers; 2007-11-01; Type: Journal; Link: Click Here

  • Md. Anowar Hossian, ManBae Lim, SunChul Huh, WonJo Park; A Study on Fatigue Crack Propagation Properties Using the X-Ray Diffraction Method; Fifth International Conference on Physical and Numerical Simulations of Material Processing (ICPNS 2007); 2007-10-23; Impact Factor (IF): 4.652; Type: Conference; Area: Applied Mechanics Link: Click Here

  • Kamruzzaman, M. and Dhar, N. R.; Wear Behavior of Carbide Insert under High-Pressure Coolant Jet Assisted Machining of 42CrMo4 Steel; Proceedings of the All India Conference on Recent Developments in Manufacturing & Quality Management (RDMQM-2007), India, pp.178-187, 15 October, 2007.; 2007-10-15; Type: Conference; Area: Manufacturing

  • Won-Jo Park, Md. Anowar Hossian, Yong-Bum Choi, Sung-Ho Park and Sun-Chul Huh; A Study on the manufacturing conditions of metal matrix composites by low Pressure infiltration process; 10th International Conference on Advances in Materials and Processing Technologies AMPT 2007; 2007-10-07; Type: Conference; Area: Applied Mechanics Link: Click Here

  • Won-Jo Park, Md. Anowar Hossian, Yong-Bum Choi, Sung-Ho Park and Sun-Chul Huh; A Study on the manufacturing conditions of metal matrix composites by low Pressure infiltration process; Journal of Mechanical Science and Technology; 2007-10-01; Type: Journal; Link: Click Here

  • Kamruzzaman, M. and Dhar, N. R.; Effects of High Pressure Coolant Jet on Temperature, Chip and Force in Turning 42CrMo4 Steel; Proceedings of the National Conference on Advances in Materials and Manufacturing Technology (AMMT-2007), India, pp.14-20, 18 September, 2007.; 2007-09-18; Type: Conference; Area: Manufacturing

  • M. M. Rahman, M. A. A. lima, M. A. Khairula, Z. Abdin, I. M. Mahbubul; Measurement of manufacturing process capability: a case study; Engineering e-Transaction (ISSN 1823-6379) 2 (1), 15-19; 2007-06-07; Type: Journal; Area: Manufacturing Engineering

  • Md. Anowar Hossian, WonJo Park; Buckling of Short Columns having Non-Symmetric Responses in Tension and Compression; Proceedings of the KSME 2007; 2007-05-30; Type: Conference; Area: Applied Mechanics Link: Click Here

  • Dhar, N. R., Kamruzzaman, M. and Rashid, M. H.; On Effect of High-Pressure Coolant on Tool Wear and Surface Finish in Turning AISI-8740 Steel”,; Proceedings of the International Conference on Manufacturing Automation (ICMA-2007), Singapore, pp.695-703, 08 May, 2007.; 2007-05-08; Type: Conference; Area: Manufacturing

  • M. Ashiqur Rahman, Sajedur Rahman Akanda, Md. Anowar Hossain; Effect of Cross-section Geometry on the Response of an SMA Column; Journal of Intelligent Material Systems and Structures; 2007-03-29; Type: Journal; Link: Click Here

  • Dhar, N. R., Islam, S. and Kamruzzaman, M.; Effect of Minimum Quantity Lubrication (MQL) on Tool Wear, Surface Roughness and Dimensional Deviation in Turning AISI-4340 Steel; G.U. Journal of Science, V0l. 20(2), pp. 23-32, 2007. Published 25.03.2007/2010.; 2007-03-25; Impact Factor (IF): 1.38; Type: Journal; Area: Manufacturing

  • Kamruzzaman, M., Dhar, N. R. and Rashid, M. H.; Effect of High-Pressure Coolant on Chip, Temperature and Cutting Force in Turning AISI-1060 Steel”,; Proceedings of the National Conference on Design, Dynamics and Manufacturing (NCDDM-2007), Punjab, India , pp.199-204, March, 2007.; 2007-03-15; Type: Conference; Area: Manufacturing

  • Dhar, N.R. and Kamruzzaman, M.; Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Turning AISI-4037 Steel under Cryogenic Condition; International Journal of Machine Tools & Manufacture, Vol. 47 (5), pp. 754–759, 2007. Published March-June 2007.; 2007-03-06; Impact Factor (IF): 1.63; Type: Journal; Area: Manufacturing

  • Kamruzzaman, M. and Dhar, N. R.; An Experimental Investigation into Tool Wear, Tool Life and Product Quality in Turning Steel under High-Pressure Coolant Condition; Proceedings of the Global Conference on Production and Industrial Engineering (CPIE-2007), Jalandhar, India, pp.1-6, March, 2007.; 2007-03-06; Type: Conference; Area: Manufacturing

  • NML Huq, AM Afsar; Analysis of Elastic Field in Stiffened Bars of Composite Material by Displacement Potential Function; Proceedings of the 3rd BSMEASME International Conference on Thermal Engineering; 2006-12-26; Type: Conference; Area: Applied Mechanics

  • Dhar, N. R., Kamruzzaman, M., Khan, M.M.A. and Chattopadhyay, A.B.; Effects of Cryogenic Cooling by Liquid Nitrogen Jets on Tool Wear, Surface Finish and Dimensional Deviation in Turning Different Steels; Int. J. Machining and Machinability of Materials, Vol. 1, No. 1, pp.115-131, 2006.; 2006-09-02; Impact Factor (IF): 4.8; Type: Journal; Area: Manufacturing

  • Dhar, N. R., Islam, S. and Kamruzzaman, M; Experimental Investigation on Effect of Minimum Quantity Lubrication (MQL) in Machining Steel; An International Journal of Manufacturing Technology & Research, India, Vol. 2, No. 1&2, pp. 45-52, January-June 2006.; 2006-06-01; Impact Factor (IF): 1.63; Type: Journal; Area: Manufacturing

  • Dhar, N. R. and Kamruzzaman, M.; Effects of Cryogenic Cooling on Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Turning AISI-8740 Steel by Coated Carbide; Proceedings of the 1st International Conference & 7th AUN/SEED-Net Fieldwise Seminar on Manufacturing and Material Processing, pp.36-41, 14-15 March 2006, Kuala Lumpur.; 2006-03-14; Type: Conference; Area: Manufacturing

  • Dhar, N.R., Kamruzzaman, M. and Ahmed, Mahiuddin; Effect of Minimum Quantity Lubrication (MQL) on Tool Wear and Surface Roughness in Turning AISI-4340 Steel; Journal of Materials Processing Technology , Vol.172, pp. 299–304, 2006.; 2006-02-28; Impact Factor (IF): 1.6; Type: Journal; Area: Manufacturing

  • Dhar, N. R. and Kamruzzaman, M.; Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Cryogenic Machining; Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005), pp.1-6, 28-30 December 2005, Dhaka, Bangladesh.; 2005-12-28; Type: Conference; Area: Manufacturing

  • Dhar, N. R., Hossain, M. and Kamruzzaman, M.; MQL Applications in Grinding of 16MnCr5 Steel: A Comparison with Wet and Dry Grinding; Proceedings of the International Conference on Mechanical Engineering 2005 (ICME2005), pp.1-5, 28- 30 December 2005, Dhaka, Bangladesh.; 2005-12-28; Type: Conference; Area: Manufacturing

  • Dhar, N. R. and Kamruzzaman, M.; An Experimental Study of Cryogenic Cooling in Grinding Steels: Chip Formation, Temperature and Surface Roughness; Vol. ME 34, pp. 22-31; 2005-12-20; Type: Journal; Area: Manufacturing

  • Dhar, N. R. and Kamruzzaman, M.; Cutting Temperature, Tool Wear, Surface Roughness and Dimensional Deviation in Cryogenic Machining; Tehran International Congress On Manufacturing Engineering (TICME2005), PP.1-11, December 12-15, 2005, Tehran, Iran.; 2005-12-12; Type: Conference; Area: Manufacturing

  • Dhar, N. R. and Kamruzzaman, M.; Wear of Coated Carbide Tool, Surface Finish and Dimensional Deviation in Turning Steel under Cryogenic Cooling; AEESEAP Journal of Engineering Education, Malaysia, Vol.31:No.1, pp. 61-71, 2005. ISSN 0125-8737; 2005-11-25; Type: Journal; Area: Manufacturing

  • Dhar, N. R., Islam, S., Kamruzzaman, M. and Paul, S,; Wear Behavior of Uncoated Carbide Inserts under Dry, Wet and Cryogenic Cooling Conditions in Turning C-60 Steel; J. of the Braz. Soc. of Mech. Sci. & Eng, Vol. 28, No. 2, pp. 146-152, April-June 2006; 2005-11-25; Impact Factor (IF): 2.00; Type: Journal; Area: Manufacturing

  • H. Bhowmik, C.P. Tso, K.W. Tou and F.L. Tan; Convection heat transfer from discrete heat sources in a liquid cooled rectangular channel; DUET; 2005-11-08; Impact Factor (IF): 4.7; Type: Journal; Area: Thermal Engineering

  • Dhar, N. R. , Khan, M. M. A. and Kamruzzaman, M.; A Study of Effects of MQL by Vegetable Oil on Cutting Temperature, Chips and Cutting Forces in Turning AISI-1060 Steel; Proceedings of All India Seminar on Recent Advances in Manufacturing Technologies, October 22-23, 2005, NIT, Rourkela, Orissa, India.; 2005-10-22; Type: Conference; Area: Manufacturing

  • H. Bhowmik and K.W. Tou; An experimental study of transient heat transfer from discrete heat sources in water cooled vertical rectangular channel; DUET; 2005-09-02; Impact Factor (IF): 1.78; Type: Journal; Area: Thermal Engineering

  • H. Bhowmik, C.P. Tso and K.W. Tou; Analyses of convection heat transfer from discrete heat sources in a vertical rectangular channel; DUET; 2005-09-02; Impact Factor (IF): 1.78; Type: Journal; Area: Thermal Engineering

  • Dhar, N. R., Islam, S. and Kamruzzaman, M.; Experimental Investigation on Effect of Minimum Quantity Lubrication (MQL) in Machining Steel; Vol.4 No.1, pp. 13-24, 2005. ISSN 1684-4114; 2005-06-30; Type: Journal; Area: Manufacturing

  • H. Bhowmik and K.W. Tou; Study of transient forced convection heat transfer from discrete heat sources in a FC –72 cooled vertical channel; DUET; 2005-05-08; Impact Factor (IF): 3.5; Type: Journal; Area: Thermal Engineering

  • H. Bhowmik and K.W. Tou; Experimental study of transient natural convection heat transfer from simulated electronics chips; DUET; 2005-04-08; Impact Factor (IF): 3.44; Type: Journal; Area: Thermal Engineering

  • H. Bhowmik and K.W. Tou; Experimental study of transient forced convection heat transfer from simulated electronic chips; DUET; 2005-03-11; Impact Factor (IF): 1.86; Type: Journal; Area: Thermal Engineering

  • Dhar, N. R., Islam, S., Kamruzzaman, M. and Ahmed, T.; The Calibration of Tool-Work Thermocouple in Turning Steels; National Conference on Industrial Problems on Machines and mechanisms, 24th-25th February, 2005.; 2005-02-24; Type: Conference; Area: Manufacturing

  • H. Bhowmik and K.W. Tou; Effect of protrusion on thermal transient behaviour of chips in a liquid channel during loss of pumping power; DUET; 2005-01-08; Impact Factor (IF): 3.9; Type: Journal; Area: Thermal Engineering

  • Dhar, N. R. and Kamruzzaman, M.; Effects of Cryogenic Cooling by Liquid Nitrogen Jet on Temperature, Chips and Surface Roughness in Grinding AISI-4142 Steel; Proceedings of 4th International Mechanical Engineering Conference & 9th Annual Paper Meet, 355-361 December 2004, Dhaka, Bangladesh; 2004-12-29; Type: Conference; Area: Manufacturing

  • Mohammad Zoynal Abedin, M. A. Islam, M. A. R. Sarkar; Experimental studies on heat transfer and pressure drops through a tube with wire-coil-inserts at low turbulent Reynolds number; 4th International Mechanical Engineering Conference and 9th Annual Paper Meet, Institution of Engineers, Bangladesh, 2004, pp. 92-99; 2004-12-15; Type: Conference; Area: Thermal Engineering

  • • C.P. Tso, K.W. Tou and H. Bhowmik; Experimental and numerical thermal transient behaviour of chips in a liquid channel during loss of pumping power; DUET; 2004-12-08; Impact Factor (IF): 1.78; Type: Journal; Area: Thermal Engineering

  • Mohammad Zoynal Abedin, M. Ehsan, M. A. Islam, M. A. R. Sarkar; Heat transfer through a tube with wire-coil-inserts at low turbulent Reynolds number; 31st National Conference on Fluid Mechanics and Fluid Power, Jadavpur University, Kolkata, India, Vol. 1, 2004, pp. 731-739.; 2004-11-01; Type: Conference; Area: Thermal Engineering

  • Montajir,R.M, Tsunemoto, H, Ishitani,H, Khalil,M.K; Effect of High Pressure Injection and High Charging on Mixture Distribution Behavior in a Small DI Diesel Engine; Journal of Mechanical Engg. The Institute of Engineers, Bangladesh (IEB), Vol. ME28, pp.9-16.; 2000-01-06; Type: Journal; Area: Thermal Engineering

  • Amin,A.K.M.N, Khalil,M.K; Investigation of the Influence of Different Parameters on Chatter Arising during Metal Cutting process; BUET Studies ,Vol. 02, pp34-47; 1999-01-06; Type: Journal; Area: Production Engineering

  • Amin,A.K.M.N, Khalil,M.K; Investigation of Chatter Arising in Machine Tool fixture Work (MTFW) System during Turning; Proc. of the International Conference on Advanced Manufacturing Technology pp. 101-114; 1994-01-06; Type: Conference; Area: Production Engineering