Dr. Mohammad Abu Taher

Professor, Dept. of Mathematics, Dhaka University of Engineering & Technology, Gazipur

Postdoc. (PKNU & ANU, S. Korea), Ph.D. in Nanofluid (PKNU, S. Korea),
M. Phil (BUET, Bangladesh), M.Sc. & B.Sc. (RU, Bangladesh).

Office Address: Room # 120, Old Academic Building

PABX: 49274034-53 Extn: 5017

Phone: (+88) 01614619094

E-mail: tahermath@duet.ac.bd Send Email

Alternate:

E-mail: tahermath at yahoo.com

Other:

Degree University Year Discipline
Post-Doctoral Pukyong National University & Andong National University, S. Korea 2013-2015 Microchannel Flow, Surface Roughness, LBM
Ph.D. Pukyong National University, S. Korea 2009 Nanofluid
M.Phil Bangladesh University of Engineering & Technology, Bangladesh 2005 Mathematics
M.Sc. Rajshahi University, Bangladesh 1998 Applied Mathematics
B.Sc. Rajshahi University, Bangladesh 1997 Mathematics
Undergraduate Courses
  • Matrix
  • Calculus
  • Differential Equations
  • Coordinate Geometry
  • Numerical and vector Analysis.
Post-Graduate Courses
  • Computational Fluid Dynamics
  • Heat Transfer
Name Topic
Field of Specialization Lattice-Boltzmann Method (LBM)
Research Interest Computational Fluid Dynamics (CFD), Heat Transfer, Microchannel and Nano-fluid flow, Surface Roughness, Lattice-Boltzmann Method (LBM).
Year & Duration Designation Scope of Works Company/Institute/University
Jan 19,2017 ~ Present Professor, Dept. of Math Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Jul 08, 2015 ~ Jan 18, 2017 Associate Professor, Dept. of Math Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Dec.20, 2009 ~ Jul 07, 2015 Assistant Professor, Dept. of Math Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Feb 08, 2004 ~ Dec 19, 2009 Lecturer, Dept. of Math Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Type Title
Journal Publications
  • M. A. Taher, H. D. Kim, Y.W. Lee, ” Study of thermal and hydraulic performances of circular and square ribbed rough microchannels using LBM”, Journal of Thermal Science, Vol.24, No.06,pp.549-556,2015.
  • M. A. Taher, L.K.Saha, Y.W. Lee, “Effects of circular riblets rough microchannel on friction and fluid flow using LBM” Procedia Engineering, vol.105, pp.425-430, 2015.
  • M. A. Taher, Liton Kumar Saha, Y.W. Lee, “Effects of aspect ratios on flow friction and thermal behavior inside a close domain using Lattice Boltzmann Method”, American Journal of Applied Mathematics, Vol.03, No.03,pp.1-7, 2015.
  • Liton Kumar Saha, K. M. Salah Uddin, M. A. Taher, “Effect of internal heat generation or absorption on MHD mixed convection flow in a lid driven cavity”, American Journal of Applied Mathematics, Vol.03, No.03, pp.20-29, 2015.
  • Mohammad Abu Taher, Huey Dong Kim, Yeon Won Lee, “Study of mass and flow resistance in a square ribbed microchannel using Lattice Boltzmann Method”, Journal of Korean Society for Power System Engineering, Vol.18, No.06, pp.207-214, 2014.
  • M. A. Taher, H. D. Kim, Y.W. Lee, “LBM simulation on friction and mass flow analysis in a rough microchannel”, Journal of Korean Society of Marine Engineering, Vol.38, No.10, pp.1237-1243, 2014.
  • M. A. Taher, Y.W. Lee, H. D. Kim,” High Prandtl number mixed convection cavity flow using Lattice Boltzmann Method”, European Scientific Journal, Vol.09, No.33, pp.159-178, 2013
  • M. A. I. Rasel, M. A. Taher, H. D. Kim, “A study on the gas-solid particle flows in a needle-free drug delivery device” J. Thermal Science, Vol.22, No.4, pp.340-344, 2013.
  • M. A. Taher, Y.W. Lee, H. D. Kim,” Heat transfer enhancement of Cu-H2O nanofluid with internal heat generation using LBM”, Open J. Fluid Mechanics, Vol.03, No.2A, pp.92-99, 2013.
  • M. A. Taher, S. C. Saha, Y.W. Lee, H. D. Kim, “Numerical study of Lid-driven square cavity with heat generation using LBM, American J. Fluid Dynamics, Vol.03, No.02, pp.40-47, 2013.
  • M. A. Taher, Y.W. Lee, H. D. Kim, “Numerical study of the effect of wedge angle of a wedge-shaped body in a channel using Lattice Boltzmann method”, Procedia Engineering, Vol.56, pp. 232-238, 2013.
  • M. A. Taher, Y.W. Lee, “Numerical study on reduction of fluid forces acting on a circular cylinder with different control bodies using Lattice-Boltzmann method”, Int. J. Energy and Technology, Vol.4, No.18, pp.1-7, 2012
  • M. A. Taher, Y.W. Lee, “Lattice-Boltzmann analysis of fluid flow behaviors around different bluff bodies in a two dimensional microchannel”, J. Engineering and Technology, Vol.9, No.1, pp.01-16, 2011
  • M. A. Taher, Kui-Ming Li, Yeon-Won Lee, “Numerical study of H2O-Cu nanofluid using Lattice-Boltzmann method”, J. Korean Society of Marine Engineering, Vol.34, No.1, pp.53-61, 2010
  • M. A. Taher, H.Y. Jung, Y. W. Lee, “ Fluid flow behaviors around wedge-shaped body using Lattice-Boltzmann method”, J. Korean Society for Power System Engineering, Vol.13, No.4, pp.24-30, 2009.
  • M. A. Taher, Tae-Sil Baek, Yeon-Won Lee, “Lattice-Boltzmann simulation of fluid flow around a pair of rectangular cylinders”, J. Korean Society of Marine Engineering, Vol. 33, No.01, pp.62-70, 2009.
  • M. A. Taher, Yeon-Won Lee, “The coupling of conduction with free convection flow along a vertical flat plate in presence of heat generation”, J. Korean Society of Marine Engineering, Vol. 31, No.7, pp.833-841, 2007.
  • M. M. Molla, M. A. Hossain, and M. A. Taher, “Magnetohydrodynamic Natural convection flow on a Sphere with uniform heat flux in presence of heat equation”, J. Acta Mechanica, Vol.186, pp.75-86, 2006.
  • M. M. Molla, M. A. Taher, M. M. K. Chowdhury, and M. A. Hossain, “Magnetohydrodynamic Natural convection flow on a Sphere in presence of heat equation”, J. Nonlinear Analysis: Modelling and Control, Vol. 10, No. 4, pp. 349-363, 2005.
Conference Proceedings
  • M. A. Taher, Y. K. Park, Y. W. Lee, “Heat, Mass and Friction Analysis in Rough Microchannel using LBM” 8th int. Conf. on computational Heat and Mass Transfer, May 24-28, 2015, Istanbul, Turkey.
  • M. A. Taher, H. D. Kim, Y.W. Lee, ” Effects of Roughness Geometry on Friction and Mass Flow in a Microchannels using LBM”, Proce. of the Korean Society of Visualization, pp.83-88, Dec.05, 2014, Daegu, Korea.
  • M. A. Taher, H. D. Kim, C. S. Kang, Y.W. Lee, “Friction and Flow Analysis of Square and Circular Riblets Rough Microchannels using LBM”, Proce. of 5th Asian Workshop on Thermophysics and Fluid Science (AJWTF), KA 27, Sept.23-26, 2014, Huis Ten Bosch, Nagasaki, Japan.
  • M. A. Taher, H. D. Kim, Y.W. Lee, “Friction and Mass Flow Analysis in a Circular Ribbed Microchannels using Lattice-Boltzmann Method”, Proce. of the Int. Symposium on Marine Engineering and Technology (ISMT), pp.81-85, Sept.17-19, 2014, Busan, Korea.
  • M. A. Taher, H. D. Kim, Y. W. Lee, ” Study of Surface Roughness Effects in Microchannels using Lattice Boltzmann Method”, Proce. of the Korean Society of Visualization (KSV), pp.34-39, April 25, 2014, Seoul, Korea.
  • M. A. Taher, R. Das. H. D. Kim, “LBM Simulation on Natural Convection Flow in a Green House Under Winter Day Conditions” Proce. Korean Society of Mechanical Engineers (KSME), pp.801-805, December18-20, 2013, Kangwon-Do, Korea.
  • M. A. Taher, Y.W. Lee, H. D. Kim, “Lattice-Boltzmann Method for Fluid Flow and Heat Transfer of Cu-H2O Nanofluid in a Square Cavity with Internal Heat Generation”, Proce. of 11th Int. Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, May 6-11, 2013, Shenzhen, China.
  • M. A. Taher, Y.W. Lee, H. D. Kim, “Numerical Study of the Effect of Wedge Angle of a Wedge-Shaped Body in a Channel Using Lattice Boltzmann Method”, 5th BSME Int. Conference on Thermal Engineering, December 21-23, 2012, Dhaka, Bangladesh.
  • M. A. Taher, M. M. A. Sarker, M. M. K. Chowdhury, Y. W. Lee, “Study on the reduction of fluid forces acting on a circular cylinder with different control bodies using Lattice-Boltzmann method” Proce. 13th Asian Congress of Fluid Mechanics, pp.439-442, December 17-21, 2010, Dhaka, Bangladesh.
  • M. A. Taher, Yeon Won Lee, “Study of buoyancy-driven heat transfer enhancement of Cu-H2O nanofluid in a square cavity using LBM”, Proce. 6th Kumamoto-Pukyong university joint conference, pp.24-27, 2009, Kumamoto, Japan.
  • M. A. Taher, Yeon Won Lee, “Numerical analysis of nanofluid in a cavity using LBM”, Proce. Korean Society of Mechanical Engineering (KSME), pp.287-290, May 20-22, 2009, Busan, Korea.
  • M. A. Taher, Yeon Won Lee, “Numerical study of wedge-shaped body with wedge angle q = 900 placed in a channel using Lattice-Boltzmann method”, Proce. Int. Symposium on Advanced Engineering (ISAE), pp.121-124, March 19-21, 2009, Busan, Korea.
  • M. A. Taher, Yeon Won Lee, “The effect of gap length between two cylinders on fluid flow analysis in a channel”, Proce. Korean Society of Marine Engineering (KOSME), pp.59-65, March 19-21, 2008, Busan, Korea
  • M. A. Taher, Yeon Won Lee, “Lattice-Boltzmann simulation of fluid flow analysis around a pair of rectangular cylinders placed in a horizontal channel”, Proce. Int. Symposium on Advanced Mechanical & Power Engineering (ISAMPE), pp.161-166, Oct. 9-12, 2008, Busan, Korea.
  • M. A. Taher, Yeon Won Lee, “Numerical simulation of fluid flow around a pair of rectangular cylinders placed in a channel using Lattice-Boltzmann method”, Proce. Pukyong-Kumamoto University Joint Conference, pp.13-18, Sept.1-3, 2008, Busan, Korea.
  • M. A. Taher, Yeon Won Lee, “Fluid flow analysis around a bluff bodies using lattice Boltzmann method”, Proc. Korean Society for Power System Engineering (KSPSE), pp.132-138, Nov. 30-Dec.01, 2007, Busan, Korea.
  • M. A. Taher, Yeon Won Lee, “Natural convection fluid flow along a vertical flat plate with wall conduction in presence of heat generation”, Proce. Int. Symposium on Marine Technology (ISMT), pp.171-176, Oct. 24-25, 2007, Busan, Korea.
  • M. A. Taher, Yeon Won Lee: Effect of thermophysical quantities of water along a flat plate with wall conduction and free convection in presence of heat generation. Proce. of Pukyong-Kumamoto University Joint Conference, pp.45-50, August 21-23, 2007, Kumamoto, Japan.
  • M. A. Taher, Yeon Won Lee, M.M. Molla, “The coupling of conduction with free convection along a vertical flat plate in presence of heat generation”, Proce. Korean Society of Marine Engineering (KOSME), pp.-69-74, June 28-29, 2007, Gyeongju, Korea.
  • M. A. Taher and M. M. Molla, “Natural convection Bounded layer Flow on a Sphere in presence of Heat Generation, Proce. 5th Int. Mechanical Engineering Conference (IMEC), pp. 223-228, Sept.30-02 Oct., 2005, IEB, Dhaka, Bangladesh.
  • M. A. Taher, M. M. K. Chowdhury and M. M. Molla, Magnetohydrodynamic Natural convection flows on a Sphere, Proce. 4th Int. Mechanical Engineering Conference (IMEC), pp. 85-91, December 29-31, 2004, IEB, Dhaka, Bangladesh.
Topic Info
Supervisions
  • Philosophical Doctorate (Ph.D):
  • Post-Graduate Supervision (Completed): M. Phil : 01
Chair & Co-Chair Chair:

  • The International Symposium on Marine Engineering and Technology (ISMT), Sept.17-19, 2014, Busan, Korea.
  • The 9th International Partnership Program (IPP), Andong National University, Andong, Korea, August 5-9, 2013.

Co-Chair:

  • The 5th BSME International Conference on Thermal Engineering, December 19-21, 2012, Dhaka Bangladesh.
Reviewer
  • The 6th BSME International Conference on Thermal Engineering, Bangladesh (2014).
  • Procedia Engineering, Vol.56, 2013.
  • The 5th BSME International Conference on Thermal Engineering, Bangladesh(2012).