Dr. Mohammad Washim Dewan

Professor, Department of ME, Dhaka University of Engineering & Technology, Gazipur

Ph.D.(LSU, USA), M.Sc. (TU, USA), B.Sc. (BUET, Bangladesh).

Office Address: Room # 406, Old Academic Building

PABX: 49274034-53  Extn: 4051 (Off) & 4052 (Res)

Phone: (+88) 01531261380

E-mail: washim0179@gmail.com  Send Email

Alternate:

E-mail: washim0179 at duet.ac.bd

E-mail: washim0173 at yahoo.com

Per. Site:

Other:

Degree University Year Discipline
Ph.D. Louisiana State University, USA 2015 Mechanical Engineering
M.Sc. Tuskegee University, USA 2011 Mechanical Engineering
B.Sc. Bangladesh University of Engineering and Technology. 2007 Mechanical Engineering
Undergraduate Courses
  • ME 1004- Engineering Drawing-II
  • ME2002- Computer Programming-I
  • ME 2301-Metallic Materials Science
  • ME2501-Basic Thermodynamics
  • ME 2403-Mechanics of Solid
  • ME 3403-Machine Design
Post-Graduate Courses
  • ME 4223-Welding Engineering and NDT (LSU, USA)
Name Topic
Field of Specialization Materials, Additive Manufacturing, and Fracture Mechanics
Research Interest Materials (Composite, Ceramics, and Engineering Materials), Welding, Non-destructive Testing, and Fracture Mechanics
Year & Duration Designation Scope of Works Company/Institute/University
 ~ Present Associate Professor, Dept. of ME Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Aug. 2011 ~ Dec. 2015 Research Assistant, Dept. of ME Research Louisiana State University, Louisiana, USA
Aug. 2009 ~ Aug. 2011 Research Assistant, Dept. of T-CAM Research Tuskegee University, Alabama, USA
Assistant Professor, Dept. of ME Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Dec. 2007 ~ Lecturer, Dept. of ME Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Type Title
Journal Publications
  • Mohammad W. Dewan, Daniel J. Huggett, T.W. Liao, M.A. Wahab, and A. M. Okeil (2016). “Prediction of Tensile Strength of Friction Stir Weld Joints with Adaptive Neuro-Fuzzy Inference System (ANFIS) and Neural Network.” Materials and Design, Volume 92, Pages 288-299.
  • Mohammad W. Dewan, M.A. Wahab, and Ayman M. Okeil (2014). “Influence of Weld Defects and Post-Weld Heat Treatment (PWHT) of Gas Tungsten Arc Welded (GTAW) AA6061-T651 Aluminum Alloy”. Journal of Manufacturing Science and Engineering, Volume 137(5), Pages 051027-051036.
  • Mohammad W. Dewan, Jiandong Liang, M. A. Wahab, and Ayman M. Okeil (2014). “Effect of Post-Weld Heat Treatment and Electrolytic Plasma Processing on Tungsten Inert Gas Welded AISI 4140 Alloy Steel”. Materials and Design, Volume 54, Pages 6–13.
  • Mohammad W. Dewan, Jiandong Liang, M. A. Wahab, and Ayman M. Okeil (2013). “Post-Weld Residual Stresses and Heat Treatments of Gas Tungsten Arc Welded Aluminum Alloy AA6061-T651”. World Journal of Engineering, Volume 10, Issue 1, Pages 11-22.
  • Mohammad K. Hossain, Muhammad E. Hossain, Mohammad W. Dewan, Mahesh Hosur, and Sheikh Jeelani (2013). “Effects of carbon nanofibers (CNFs) on thermal and interlaminar shear responses of E-glass/polyester composites”. Composites Part B: Engineering, Volume 44, Issue 1, Pages 313–320.
  • Mohammad W. Dewan, Mohammad K. Hossain, Mahesh Hosur, and Sheikh Jeelani (2012). “Thermo-mechanical Properties of Alkali Treated Jute-Polyester/Nanoclay Biocomposites Fabricated by VARTM Process”. Journal of Applied Polymer Science, Volume 128, Issue 6, Pages 4110-4123.
  • Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur, and Sheikh Jeelani (2011). “Mechanical performances of surface modified jute fiber reinforced biopol nanophased green composites,” Composites Part B: Engineering, Volume 42, Issue 6, Pages 1701–1707.
  • Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur, and Sheikh Jeelani (2011). “Physical, Mechanical, and   Degradability Properties of Chemically Treated Jute Fiber Reinforced Biodegradable Nanocomposites” Journal of Engineering Materials and Technology, Volume 133, Issue 4, Pages 041003-09.
  • Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur, and Sheikh Jeelani (2011). “Effect of surface treatment and nanoclay on thermal and mechanical performances of jute fabric/biopol ‘green’ composites”. Journal of Reinforced Plastics and Composites, Volume 30, Issue 22, Pages 1841–1856.
Conference Proceedings
  • Mohammad W. Dewan, Gustavo Gonzales, and M.A. Wahab (2015). “Effects of Rotating-Bending and Torsional Fatigue Loads on Gas Tungsten Arc (GTA) Welded AISI 1018 Low Carbon Steel Joints.” Proceedings of the ASME 2015 Manufacturing Science and Engineering Conference, MSEC2015-9326, June 8-12, 2015, Charlotte, NC, USA. (Paper and Technical Presentation)
  • Mohammad W. Dewan, Daniel J. Huggett, M.A. Wahab, A. M. Okeil, and T.W. Liao (2015). “Tensile Properties from FSW Processing using Adaptive Neuro-Fuzzy Inference System (ANFIS) Model.” ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE2015-52498, November 13-19, 2015, Houston, Texas, USA. (Abstract and Technical Presentation)
  • Mohammad W. Dewan, M.A. Wahab, and Ayman M. Okeil (2014). “Effect of Weld Defects on Tensile Properties of Lightweight Materials and Correlations with Phased Array Ultrasonic Non-destructive Evaluation”.  Proceedings of the ASME 2014 Manufacturing Science and Engineering Conference, MSEC2014-3950, June 9-13, 2014, Detroit, Michigan, USA. (Paper and Technical Presentation)
  • Mohammad W. Dewan and M.A. Wahab (2014). “Analysis of Friction-Stir-Welding (FSW) Process Parameters of Mechanical Responses and Failure Behavior of Aerospace Aluminum Alloy Joints”. 13th MIE Graduate Student Conference, Department of Mechanical and Industrial Engineering, LSU, Baton Rouge, Louisiana. (Abstract and Technical Presentation)
  • Jiandong Liang, Mohammad W. Dewan, and Muhammad Wahab (2013). “Effect of Post Weld Heat Treatment and Electrolytic Plasma Treatment on TIG Welded 4140 Steel Joints”. ASME 2013 International Mechanical Engineering Congress & Exposition, IMECE2013-62973, November 15-21, 2013, San Diego, California, USA. (Abstract and Technical Presentation)
  • Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur, and Sheikh Jeelani (2011). “Thermal and Mechanical Performance of Jute Polyester Nanophased Biocomposite”, Proceedings of SAMPE 2011, Long Beach, CA, May 23-26, 2011.
  • Mohammad K. Hossain, Mohammad W. Dewan, Muhammad E. Hossain, Mahesh Hosur, and Sheikh Jeelani (2010). “Interfacial Improvement of Nanopahsed Jute-Based Green Composite by Surface Modification”, Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE2010-39365 pp. 885-892, November 12–18, 2010, Vancouver, British Columbia, Canada. (Paper and Technical Presentation)
  • Mohammad K. Hossain, Mohammad W. Dewan, Mahesh Hosur, and Sheikh Jeelani (2010). “Mechanical and Thermal Characterization of Modified Jute/Biopol Nanophased Green Composite”, Proceedings  of 25th Annual Technical Conference of American Society for Composites, 14th U.S.- Japan Conference on Composite Materials and ASTM D-30 Meeting, ASC2010- 1121, Dayton, Ohio, USA, September 2010. (Paper and Technical Presentation)
Topic Info
Book Chapters
  • Mohammad W. Dewan, Daniel J. Huggett, and Muhammad A. Wahab (2015). “Non-Destructive Evaluation (NDE) of Welded Structures for Aerospace Applications” Chapter #9 in Frontiers in Aerospace Science; Vol.1-Aerospace Structures and Materials, 2015, Bentham Science Publishers Ltd’s.  (Book Chapter)
  • Mohammad W. Dewan (2014). “Processing of Jute Fiber Reinforced Green Composites”. Publisher: LAMBERT Academic Publishing (LAP); February 19, 2014; ISBN-10: 3846583367, ISBN-13: 9783846583364. (Book)
Research & Project
Experience
  • MS thesis: “Processing and Characterization of Jute Fiber Reinforced Biopol Conventional and Nano-phased Bio-composites” (NSF Funded Project, Tuskegee University, USA)
  • Dissertation: “Challenges towards Structural Integrity and Performance Improvement of Welded Structures” (Louisiana State University, USA)
Reviewer
  • ASME Journal of Manufacturing Science and Engineering
  • Materials Journal
  • Materials and Design Journal
  • Materials Science and Engineering A Journal
Professional Activities
  • Member: American Society for Non-destructive Testing (ASNT) (2012-present)
  • Member: American Society of Mechanical Engineers (ASME) (2013-Present)
  • Member: American Welding Society (AWS) (2014-Present)
  • Organizer and Session Chair: ME Graduate Conference in 2015, LSU, Baton Rouge, Louisiana, USA
  • Session Co-chair: ASME 2015 Manufacturing Science and Engineering Conference, June 8-12, 2015, Charlotte, NC, USA