Journal Publications |
- Kalam, M., et al., Influences of thermal stability, and lubrication performance of biodegradable oil as an engine oil for improving the efficiency of heavy duty diesel engine. Fuel, 2017. 196: p. 36-46.
- Chowdhury, M.A., et al., Characteristics and damage mechanisms of bending fretting fatigue of materials. International Journal of Damage Mechanics, 2017: p. 1056789517693412.
- Shahin, M., M. Chowdhury, and M. Monir, Performance Analysis of Plain Journal Bearing Using CFD Model. Journal of Mechanical and Mechanics Engineering, 2017. 3(1): p. 1-17.
- Shahin, M., et al., Investigation of Engine Performance Using Different Biodiesel Blends. Journal of Mechanical and Mechanics Engineering, 2017. 3(1): p. 42-55.
- Rahman, M., et al., Diamond like carbon coating on SS 201 and tribological testing. Journal of Mechanical and Mechanics Engineering, 2017. 3(1): p. 32-41.
- Friction under an orthogonal cutting mode of operation under different Conditions, Part J: Journal of Engineering Tribology, M. A. Chowdhury, S. Das, Uttam Kumar Debnath.
- Eroded Surface Analysis of Copper Alloys, Part E: Journal of Process Mechanical Engineering, M. A. Chowdhury, Uttam Kumar Debnath, Dewan Muhammed Nuruzzaman, Islam, Md.Monirul
- Tribological study on Al -6063 based metal matrix embedded by nano SiC–Al2O3-TiO2 particles, Journal of Testing and Evaluation, Mia, Md. Shahin, Chowdhury, Mohammad Asaduzzaman, Biplov Komar Roy, Sarker, Rayhan.
- Experimental Investigation on the Mechanical performance of Al-6063 based (SiC-Al2O3-TiO2) particles reinforced composites, Materials Performance and Characterization, Md. Shahin, Biplov Komar Roy, Chowdhury, Mohammad Asaduzzaman.
- Experimental and Characterization of Eroded Surfaces of Glass Fiber Embedded in polyester Matrix, International Journal of Polymer Science, Uttam Kumar Debnath, Mohammad Asaduzzaman Chowdhury, Md. Arefin Kowser, Md. Shahin Mia, Mohammad Abdul Hye
- Erosion of Mild Steel for Engineering Design and Applications, Journal of Bio- and Tribo-Corrosion, M. A. Chowdhury, Uttam Kumar Debnath, Dewan Muhammed Nuruzzaman, Islam, Md.Monirul
- Evaluation of Bending Fretting Fatigue Test Rigs, Journal of Testing and Evaluation. Prof. Dr. Md. ArefinKowser, Prof. Dr. Mohammad AsaduzzamanChowdhury, Quazi Md. Zobaer Shah
- Friction and Wear of Non-Ferrous Materials under Artificially Created Vibration for Machine Design, International Journal of Materials Engineering Innovation, Mr. Md. Shahin Mia, Prof. Dr. Mohammad Asaduzzaman Chowdhury, Dr. Mohammad Lutfar Rahaman, Dr. Dewan Muhammad Nuruzzaman, Mr. Suman Das, Mr. Uttam Kumar Debnath.
- Effect of loading parameter on fretting fatigue by FEM, AIP Proceedings.
- Study of Erosion Characterization of carbon fiber Reinforced composite material, AIP Proceedings
- MECHANICAL AND STRUCTURAL ANALYSIS OF TMT HIGH STRENGTH STEEL BAR, AIP Proceedings
- DESIGN AND ANALYSIS OF SHOCK ABSORBER USING FEA TOOL, AIP Proceedings
- Investigation of sustainability of lubricated journal bearing under relevant design parameters, Industrial Lubrication and Tribology, Mia, Md. Shahin, Chowdhury, Mohammad Asaduzzaman
- A STUDY ON EROSIVE WEAR BEHAVIOR OF E-GLASS FIBER REINFORCED PLASTIC, Tribology in industry, U.K. Debnath, M.A. Chowdhury, M.A. Kowser, M.M. Shahin
- Experimental Evaluation of Properties of 500W and 400D Grade TMT High Strength Steel Bar,Tribology in industry, DR. MOHAMMAD ASADUZZAMAN CHOWDHURY, DR. MD. AREFIN KOWSER, MOHAMMAD ABDUL HYE
- INFLUENCE OF FRETTING MECHANISM ON FATIGUE STRENGTH AND LIFE OF AL 6061-T6 CONSIDERING ROTATING BENDING PHENOMENA, Tribology in Industry,M.A. Kowser, M.A. Chowdhury*, Q.M.Z. Shah, M.M. Shahin, M.S. Rana
- TRIBOLOGICAL STUDY ON SPUR GEAR USING DIFFERENT GEAR OILS, Tribology in Industry, M.M. Shahin, M.A. Chowdhury, U.K. Debnath, Z. Shah, M.A. Kowser
- Debnath, U., M. Chowdhury, and D. Nuruzzaman, Study of Erosion Performance and Characterization of Ebonite Reinforced With Carbon Fibers. Materials Performance and Characterization, 2016. 5(1): p. 312-329.
- Chowdhury, M.A., et al., Experimental analysis of aluminum alloy under solid particle erosion process. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2016. 230(12): p. 1516-1541.
- Debnath, U., M. Chowdhury, and D. Nuruzzaman, The Experimental Characteristics and Evaluation of Nylon-12 in Erosion Process. Journal of Testing and Evaluation, 2016. 45(3).
- Chowdhury, M. and D. Nuruzzaman. Investigation of thin film deposition on stainless steel 304 substrates under different operating conditions. in IOP Conference Series: Materials Science and Engineering. 2016. IOP Publishing.
- Debnath, U., M. Chowdhury, and D. Nuruzzaman. Erosive wear characteristics of multi-fiber reinforced polyester under different operating conditions. in IOP Conference Series: Materials Science and Engineering. 2016. IOP Publishing.
- Nuruzzaman, D., et al. Influence of normal loads and sliding velocities on friction properties of engineering plastics sliding against rough counterfaces. in IOP Conference Series: Materials Science and Engineering. 2016. IOP Publishing.
- Rahman, M.M., et al., Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD. International Journal of Surface Science and Engineering, 2016. 10(3): p. 282-302.
- Rahman, M.M., et al. Effects of Acetylene on Deposition Rate of Stainless Steels Using Thermal Chemical Vapor Deposition. in International Journal of Engineering Research in Africa. 2016. Trans Tech Publ
- Chowdhury, M.A., et al., Experimental evaluation of erosion of gunmetal under asymmetrical shaped sand particle. Advances in Tribology, 2015. 2015.
- Debnath, U.K., et al., Erosion characteristics of Teflon under different operating conditions. Journal of Polymer Engineering, 2015. 35(9): p. 889-904.
- Nuruzzaman, D.M., et al., Experimental investigation on friction coefficient of composite materials sliding against SS 201 and SS 301 counterfaces. Procedia Engineering, 2015. 105: p. 858-864.
- Chowdhury, M.A., Nuruzzaman, D.M., Rahaman, M.L. Frictional Characteristics of Steel Materials Sliding against Mild Steel, Advanced Materials Research, Vol. 903, pp.33-38 (2014), Publisher: Trans Tech Publications Ltd., Switzerland.Indexed in: SCOPUS- Elsevier
- Rahaman, M.L. Chowdhury, M.A., Nuruzzaman, D.M., Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding against Different Counterface Materials, Advanced Materials Research, Vol. 903, pp. 90-95 (2014), Publisher: Trans Tech Publications Ltd., Switzerland.Indexed in: SCOPUS- Elsevier
- Chowdhury, M.A.,Nuruzzaman, D.M, Kowser, A., Rahman, M., Roy, B.K, Chakraborty, S.,Hossen, M.S., Uddin, M.I., Hossain, M.S., “Frictional Behavior of Polymers Sliding against Smooth and Rough Mild Steel Counterfaces”, Middle-East Journal of Scientific Research (MEJSR)Vol. 21, No. 3, pp. 477-486 (2014).Publisher: International Digital Organization for Scientific Information ( IDOSI), Pakistan).
- Chowdhury, M.A., Nuruzzaman, D.M, Chowdhury M.A.K. and Roy, B.K “Experimental Study of Friction Coefficient and Wear Rate of Turned and Ground Mild Steel Surfaces Sliding against Smooth and Rough SS 304 Counterfaces”, Australian Journal of Mechanical Engineering, Vol. 12, No. 3, pp. 291-304 (2014).Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier
- Chowdhury, M.A., Nuruzzaman, D.M, Roy, B.K, Sorker, N.C., Karim, M.R., Hasan, M.M., Mia, M.S., “Experimental Study on Friction Coefficient and Wear Rate of Gun Metal Sliding against Different Counterface Materials”, Journal of the Balkan Tribological Association, Vol. 20, No. 2, pp. 169-183 (2014). Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier
- Chowdhury, M.A.,Nuruzzaman, D.M, Kowser, A., Rahman, M., Roy, B.K, Chakraborty, S.,Islam, M.D.,Aktaruzzaman, M., Nurmohammad, “Sliding Friction of Steel Combinations”, The Open Mechanical Engineering Journal,Vol. 8, pp. 364-369 (2014).Indexed in: SCOPUS- Elsevier
- Nuruzzaman, D.M., Chowdhury, M.A., “Friction Coefficient and Wear Rate of Copper and Aluminum Sliding against Mild Steel” International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies (ITJEMAST), Vol. 4, No. 1, pp. 29-40, (2013). Publisher: Thailand. Indexed in: DOAJ, Google Scholar.
- Nuruzzaman, D.M., Chowdhury, M.A., “Friction Coefficient and Wear Rate of Different Materials Sliding against Stainless Steel” International Journal of Surface Engineering and Interdisciplinary Materials Science (IJSEIMS), Vol. 1 (1), pp. 33-45, (2013)., Publisher: IGI Global, USA.
- Chowdhury, M.A, Nuruzzaman, D.M., “Experimental Investigation on Friction and Wear Properties of Different Steel Materials”, Tribology in Industry, Vol. 35, No. 1, pp. 42-50 (2013).Indexed in: SCOPUS- Elsevier
- Chowdhury, M.A., Nuruzzaman, D.M, Roy, B.K, Rahman, M.M., Azad M.A.K., Rahman, M.M.,Bhumik, S. , “Experimental Investigation of Friction Coefficient and Wear Rate of Copper Sliding against Smooth and Rough Stainless Steel 304 Couterfaces”, The Journal of American Science Vol. 9, No. 5, pp. 361-368, (2013). Publisher: Marsland Press, USA
- Chowdhury, M.A., Nuruzzaman, D.M, Roy, B.K, Islam, M.D.,Dey, P.K., Mostafa, M.G., Islam, M.S., Mia, M.R., “Experimental Invertigation on Friction and Wear of Stainless Steel 304 Sliding against Different Pin Materials”, World Applied Sciences Journal,Vol. 22, No. 12, pp. 1702-1710, (2013).Publisher: International Digital Organization for Scientific Information (IDOSI), Pakistan. Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier
- Chowdhury, M.A., Nuruzzaman, D.M, Roy, B.K, Samad, S., Sarker, M.R., Rezwan, A.H.M., “Experimental Investigation of Friction Coefficient and Wear Rate of Composite Materials Sliding against Smooth and Rough Mild Steel Counterfaces”, Tribology in Industry, Vol. 35, No. 4, pp. 286-296 (2013).Indexed in: SCOPUS- Elsevier.
- Chowdhury, M.A., Nuruzzaman, D.M, Roy, B.K, Islam, A., Hossain, Z.., Hasan, M.R., “Experimental Investigation of Friction Coefficient and Wear Rate of Stainless Steel 202 Sliding against Smooth and Rough Stainless Steel 304 Couterfaces”, Friction and Wear Research Vol. 1, Issue 3, pp. 34-41, (2013).
- Chowdhury, M.A., Nuruzzaman, D.M. and Roy, B.K. “Experimental Investigation of Friction Coefficient and Wear Rate of Stainless Steel 304 Sliding against Smooth and Rough Mild Steel Couterfaces”, Gazi University Journal of Science,Vol. 26, Issue 4, pp. 597-609 (2013).Indexed in: SCOPUS- Elsevier, DOAJ, Google Scholar
- Chowdhury, M.A., Nuruzzaman, D.M, Roy, B.K, Rahman M.M., Mia, M.S., Mia, M.R., Bhumik, S., “Experimental Investigation of Friction Coefficient and Wear Rate of Different Sliding Pairs”, World Applied Sciences Journal,Vol. 28, No. 5, pp. 608-619 (2013).Indexed in: SCOPUS- Elsevier
- Nuruzzaman, D.M., Rahaman, M.L., Chowdhury, M.A., “Friction Coefficient and Wear Rate of Polymer and Composite Materials at Different Sliding Speeds” International Journal of Surface Science and Engineering, Vol. 6, No.3, pp.231-245 (2012), Publisher: Inderscience Publishers Ltd., UK. Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS – Elsevier
- Nuruzzaman, D.M., Chowdhury, M.A., Friction Coefficient of Polymer and Composite Materials Sliding against Stainless Steel, Advanced Materials Research (AMR), Vol. 576, pp.590-593 (2012), Publisher: Trans Tech Publications Ltd., Switzerland.Indexed in: SCOPUS- Elsevier
- Chowdhury, M.A., Nuruzzaman, D.M., Deposition on SS 316 at Different Gas Flow Rates using Thermal CVD, Advanced Materials Research (AMR), Vol. 576, pp.594-597 (2012), Publisher: Trans Tech Publications Ltd., Switzerland.Indexed in: SCOPUS- Elsevier
- Chowdhury, M.A., Nuruzzaman, D.M., Mia, A.H., Rahaman, M.L., “Friction Coefficient of Different Material Pairs Under Different Normal Loads and Sliding Velocities” Tribology in Industry, Vol. 34, No.1, pp.18-23, (2012). Publisher: Faculty of Engineering University of Kragujevac, Serbia.Indexed in: SCOPUS- Elsevier.
- Nuruzzaman, D.M., Chowdhury, M.A., “Effect of Normal Load and Sliding Velocity on Friction Coefficient of Aluminum Sliding Against Different Pin Materials” American Journal of Materials Science, Vol. 2, No. 1, pp. 26-31, (2012). Publisher: Scientific & Academic Publishing, USA.
- Chowdhury, M.A., Nuruzzaman, D.M., Influence of Gas Flow Rate on the Deposition Rate on Stainless Steel 202 Substrates, Tribology in Industry, Vol. 34, No. 4, pp. 226-231 (2012). Indexed in: SCOPUS- Elsevier
- Chowdhury, M.A., Nuruzzaman, D.M., Hannan, M.A. “Effect of Sliding Velocity and Relative Humidity on Friction Coefficient of Brass Sliding against Different Steel Counterfaces” International Journal of Engineering Research and Applications (IJERA), Vol. 2, No. 2, pp. 1425-1431, (2012). Publisher: IJERA, India. Indexed in: DOAJ, Google Scholar.
- Karim, S. M. I, Chowdhury M.A, Helali, M, “Influence of sound vibration on diamond like carbon deposition rate” ISRN Mechanical Engineering, vol. 2012 (2012), pp. 1-8 (2012) Publisher: Hindawi Publishing Corporation , Egypt. Indexed in: DOAJ, Google Scholar.
- Chowdhury M.A., Nuruzzaman D.M., Rahaman M.L., “The Effect of Gas Flow Rate on the Thin Film Deposition Rate on Carbon Steel Using Thermal CVD” International Journal of Chemical Reactor Engineering, Vol. 9, pp. 1-18, (2011). Publisher: The Berkeley Electronic Press, USA.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS – Elsevier.
- Nuruzzaman, D.M., Chowdhury, M.A., Rahaman, M.L., “Effect of Duration of Rubbing and Normal Load on Friction Coefficient for Polymer and Composite Materials” Industrial Lubrication and Tribology, Vol. 63, No. 5, pp.320-326, (2011) Publisher: Emerald Group Publishing Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier
- Nuruzzaman D.M., Chowdhury M.A., Nakajima A, Rahaman M.L., Karim, S.M.I. “Friction and Wear of Diamond Like Carbon (DLC) Coatings -A Review” Recent Patents on Mechanical Engineering, Vol. 4, No. 1, pp. 55-78, (2011). Publisher: Bentham Science Publishers, Ltd., USA.Indexed in: SCOPUS- Elsevier.
- Chowdhury M.A., Nuruzzaman D.M., Khalil M.K., Rahaman M.L., “Variation of Thin Film Deposition Rate on SS 314 with the Variation of Gas Flow Rate using CVD” Industrial Lubrication and Tribology, Vol. 63, No. 6, pp.433-439, (2011) Publisher: Emerald Group Publishing Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury M.A., Nuruzzaman D.M., Rahaman M.L., “Influence of External Horizontal Vibration on the Coefficient of Friction of Aluminum Sliding against Stainless Steel” Industrial Lubrication and Tribology, Vol. 63, No. 3, pp.152-157, (2011) Publisher: Emerald Group Publishing Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury M.A., Khalil M.K.,Nuruzzaman D.M., RahamanM.L.,“The Effect of Sliding Speed and Normal Load on Friction and Wear Property of Aluminum” International Journal of Mechanical & Mechatronics Engineering, Vol. 11, No. 1, pp 53-57, (2011). Indexed in: Google Scholar, MENDELEY
- Chowdhury, M.A, Ali M.L., Helali, M. M, “The Effect of natural Frequency of the Experimental Set-up on the Friction Coefficient”, Industrial Lubrication and Tribology, Vol. 62, no. 2, pp. 78-82 (2010), Publisher: Emerald Group Publishing Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier
- Chowdhury, M.A, “The Effect of natural Frequency of the Experimental Set-up on the Wear Rate”, Industrial Lubrication and Tribology, vol. 62, no. 6, pp. 356-360. (2010), Publisher: Emerald Group Publishing Ltd., UK. Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier
- Chowdhury, M.A.,Helali, M. M,“The Influence of Natural Frequency of the Experimental Set-up on the Friction Coefficient of Stainless Steel-304” Tribology in Industry, vol. 32, no. 1, pp. 19-24, (2010). Publisher: Faculty of Engineering University of Kragujevac, Serbia.Indexed in: SCOPUS- Elsevier.
- Nuruzzaman, D.M., Nakajima, A., Mawatari, T., Chowdhury, M.A., “Experimental Study on Durability and Tribological Properties of HVOF Sprayed WC Cermet Coatings” Journal of Advanced Research in Mechanical Engineering, Vol. 1, No. 4, pp. 203-209, (2010) Publisher: HyperSciences Publisher, Tunisia.Indexed in: DOAJ, Google Scholar
- Nuruzzaman D.M., Khalil M.K., Chowdhury M.A., Rahaman M.L., “Study on Pressure Distribution and Load Capacity of a Journal Bearing Using Finite Element Method and Analytical Method” International Journal of Mechanical & Mechatronics Engineering, Vol. 10, No. 5, pp 1-8, (2010) Publisher: IJENS Publishers, Pakistan.Indexed in: Google Scholar, MENDELEY.
- Chowdhury M.A., Nuruzzaman D.M., RahamanM.L.,“Variation of Friction Coefficient of Copper with Sliding Velocity and Relative Humidity” Journal of Advanced Research in Mechanical Engineering, Vol. 1, No. 3, pp. 142-146, (2010) Publisher: HyperSciences Publisher, Tunisia. Indexed in: DOAJ, Google Scholar.
- Chowdhury, M.A, Helali, M. M, “The Frictional Behavior of Materials under Vertical Vibration”, Industrial Lubrication and Tribology, Vol. 61, no. 3, pp. 154-160 (2009), Publisher: Emerald Group Publishing Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury, M.A, Helali, M. M, “The Frictional Behavior of Composite Materials under Horizontal Vibration”, Industrial Lubrication and Tribology, Vol. 61, No. 5, pp. 246-253 (2009), Publisher: Emerald Group Publishing Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury, M.A, Helali, M. M, “The Wear Behavior of Mild Steel under Vertical Vibration”, Industrial Lubrication and Tribology, Vol. 61, No. 6, pp. 296-300. (2009), Publisher: Emerald Group Publishing Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury, M.A, Helali, M. M, Toufique Hasan, A..B..M. “The Frictional Behavior of Mild Steel under Horizontal Vibration”, Tribology International, vol. 42, pp. 946-950. (2009), Publisher: Elsevier Science Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Karim, S. M. I., Chowdhury M.A, Helali, M, “The Effect of Sound on Diamond Hot Filament Chemical Vapor Deposition” International Journal of Chemical Reactor Engineering, vol. 7, pp. 1-16. (2009). Publisher: The Berkeley Electronic Press, USA.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS – Elsevier.
- Chowdhury, M.A, Helali, M. M, “Tribological Behavior of PTFE and Rubber under Longitudinal Horizontal Vibration, Journal of Mechanical Engineering, Vol. 60, pp. 1-16 (2009), Publisher: Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak/Czech.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury, M.A,Karim, S. M. I., Ali M.L, “The Influence of Natural Frequency of the Experimenta Set-up on the Friction Coefficient of Copper”, Journal of Engineering Tribology, Vol. 224, pp. 293-298. (2009), Publisher:SAGE Publications. Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Nuruzzaman, D.M., Nakajima, A., Mawatari, T., Chowdhury, M.A., “Rolling Contact Fatigue Life of Thermally Sprayed WC Cermet Coatings –A Review” Recent Patents on Mechanical Engineering, Vol. 2, No. 2, pp. 115-129, (2009) Publisher: Bentham Science Publishers, Ltd., USA.Indexed in: SCOPUS- Elsevier.
- Chowdhury M.A., Nuruzzaman, D.M., Rahaman M.L., “Erosive Wear Behavior of Composite and Polymer Materials – A Review” Recent Patents on Mechanical Engineering, Vol. 2, No. 2, pp. 144-153, (2009) Publisher: Bentham Science Publishers, Ltd., USA.Indexed in: SCOPUS- Elsevier.
- Chowdhury, M.A., Nuruzzaman, D.M., Rahaman, M.L., “Tribological Behavior of Composite Materials –A Review”, Recent Patents on Mechanical Engineering, Vol. 1, No. 2, pp. 123-128, (2008) Publisher: Bentham Science Publishers, Ltd., USA.Indexed in: SCOPUS- Elsevier.
- Chowdhury, M.A, Helali, M. M, “The Effect of Amplitude of Vibration on the Coefficient of Friction for Different Materials”, Tribology International, Vol. 41 , pp. 307-314 (2008), Publisher: Elsevier Science Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury, M.A, Helali, M. M, “The Effect of Direction of Vibration on the Coefficient of Friction”, Indian Journal of Tribology, vol. 3, no. 2, pp. 9-16 (2008), Publisher: Tribology Society of India.
- Chowdhury, M.A, Helali, M. M, “The Effect of Relative Humidity and Roughness on the Friction Coefficient under Horizontal Vibration”, The Open Mechanical Engineering Journal, vol. 2, pp. 128-135 (2008), Publisher: Bentham Science Publishers, Ltd., USA.Indexed in: SCOPUS- Elsevier.
- Chowdhury, M.A, Helali, M. M, “The Effect of Frequency of Vibration and Humidity on the Wear rate” l, Wear, Vol. 262, pp. 198-203 (2007), Publisher: Elsevier Science Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
- Chowdhury, M.A, Helali, M. M, “The Effect of Frequency of Vibration and Humidity on the Coefficient of Friction, Tribology International, Vol. 39, pp. 958-962. (2006), Publisher: Elsevier Science Ltd., UK.Indexed in: SCIENCE CITATION (Thomson/ISI), SCOPUS- Elsevier.
|
Conference Proceedings |
- Nuruzzaman, D.M., Chowdhury, M.A., “Friction Coefficient of Polymer and Composite Materials Sliding against Stainless Steel” International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012). Organiser: International Islamic University Malaysia (IIUM).
- Chowdhury, M.A., Nuruzzaman, D.M., “Deposition on SS 316 at Different Gas Flow Rates using Thermal CVD” International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2012), Organiser: International Islamic University Malaysia (IIUM).
- Nuruzzaman, D.M., Chowdhury, M.A., Nandee, R, Debnath, B., “Experimental Study of Friction Coefficient of Copper Sliding against Mild Steel” 6th International Mechanical Engineering Conference & 14th Annual Paper Meet (6IMEC & 14APM 2012) (accepted for oral presentation), Organiser: Mechanical Engineering Division, The Institution of Engineers, Bangladesh (IEB).
- Chowdhury M.A., Nuruzzaman D.M., Rahaman M.L, Nandee, R, Debnath, B., “Effect of Normal Load and Sliding Velocity on Friction Coefficient and Wear Rate of Gun Metal” 9th International Conference on Mechanical Engineering 2011, (ICME’2011), pp 1-5, Dhaka, Bangladesh.
- Nuruzzaman, D.M., Rahaman, M.L, Chowdhury, M.A, Khalil, M.K. “Variation of Friction Coefficient with Duration of Rubbing and Sliding Velocity for Different Materials” Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering 2010 (ICMIEE’ 2010), pp 1-5, (2010) Khulna, Bangladesh.
- Chowdhury, M.A, Nuruzzaman, D.M., Rahaman, M.L., “Variation of Thin Film Deposition Rate on Carbon Steel with the Variation of Gas Flow Rate Using CVD” Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering 2010 (ICMIEE’ 2010), pp 1-6, (2010) Khulna, Bangladesh.
- Chowdhury, M.A, Nuruzzaman, D.M., Khalil, M.K, Rahaman, M.L., “Influence of Sliding Speed and Normal Load on the Coefficient of Friction and Wear Rate of Aluminum Sliding against Stainless Steel” Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering 2010 (ICMIEE’ 2010), pp 1-5, (2010) Khulna, Bangladesh.
- Chowdhury, M.A, Nuruzzaman, D.M., Rahaman, M.L., “Effect of Sliding Velocity and Relative Humidity on Friction Coefficient of Copper” Proceedings of the 3rd International Conference on Structure, Processing and Properties of Materials 2010 (SPPM’ 2010), pp 1-5, (2010) Dhaka, Bangladesh.
- Chowdhury, M.A, Nuruzzaman, D.M., Rahaman, M.L., Islam, M.S, “The Effect of Gas Flow Rate on Deposition Rate Using CVD” Proceedings of the 8th International Conference on Mechanical Engineering (2009), (ICME’ 2009), pp. 1-6, (2009) Dhaka, Bangladesh.
- Chowdhury, M.A, Ali M.L., Karim S.M.I, “The Effect of Natural Frequency of The Pin on Disc Set-Up on The Friction Coefficient of Mild steel”, National Tribology Conference, pp. 1-6 (2009), Rimballmu, University of Malaya, Malaysia.
- Nuruzzaman, D.M., Chowdhury, M.A., Rahaman, M.L., “Variation of Friction Coefficient with Duration of Rubbing and Normal Load for Different Materials” Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering, (BSME-ASME 2008), pp. 814-819, (2008) Dhaka, Bangladesh.
- Chowdhury M.A., Nuruzzaman D.M., Rahaman M.L, “Influence of Frequency and Direction of Vibration on the Coefficient of Friction of Aluminum” Proceedings of the 4th BSME-ASME International Conference on Thermal Engineering, (BSME-ASME 2008), pp. 826-831, (2008) Dhaka, Bangladesh.
- Nuruzzaman, D.M., Chowdhury, M.A., Rahaman, M.L., “Friction and Wear Behavior of Materials under Normal Load” Proceedings of the 12th Annual Paper Meet (APM) 2008, pp. 1-5, (2008) Mechanical Engineering Division, The Institution of Engineers, Dhaka, Bangladesh.
- Chowdhury M.A., Nuruzzaman D.M., Roy, B.K, Nandee, R., “Friction Coefficient of Copper Mating with Smooth and Rough Mild Steel Counterfaces” International Conference on Mechanical, Iindustrial and Materials Engineering 2013 (ICMIME 2013), RUET, Rajshahi, Bangladesh (under review).
- Chowdhury M.A., Nuruzzaman D.M., Rahaman M.L., “Frictional Characteristics of Steel Materials Sliding against Mild Steel” International Manufacturing Engineering Conference 2013 (IMEC 2013), Malaysia (Accepted).
- 99. Rahaman M.L., Chowdhury M.A., Nuruzzaman D.M., “Experimental Investigation on Friction Coefficient of Engineering Polymers Sliding against Different Counterface Materials” International Manufacturing Engineering Conference 2013 (IMEC 2013), Malaysia.
- Chowdhury, M.A., Nuruzzaman, D.M, Roy, B.K, Samad, S., Sarker, M.R., Rezwan, A.H.M., “Experimental Investigation of Friction Coefficient and Wear Rate of Composite Materials Sliding against Smooth and Rough Mild Steel Counterfaces”, 13th International Conference on Tribology, 2013 (SERBIATRIB’ 13)Faculty of Engineering, University of Kragujevac, Serbian Tribology Society, pp. 65-74, Serbia.
- Chowdhury, M.A., Islam K.N. , Roy B.K., Rahaman M.M., and Chakraborty, M.S., “Friction Coefficient and wear Rate of Polymer and composite materials sliding against smooth Stainless steel counterfaces” of Copper Mating with Smooth and Rough Mild Steel Counterfaces” International Conference on Physics for energy and environment 2014 (ICMPEE 2014), Bangladesh Physical Society, Bangladesh.
- Nuruzzaman D.M, Chowdhury, M.A.,Rahman, M.,Kowser, A., Roy, B.K, “Experimental investigation on friction coefficient of composite materials sliding against SS 201 and SS 301 counterfaces” 6th BSME International Conference on Thermal Engineering (ICTE 2014), Bangladesh.
- B. K. Roy, M. A. Chowdhury, D. M. Nuruzzaman, M. A. Kowser and M. M. Rahman, “Experimental Investigation of Friction Coefficient and Wear Rate of Aluminium Alloy 6063 Sliding Against Mild Steel CounterfacesUsing Taguchi Method” National Conference on Physics Research and Education in Bangladesh, organized by Bangladesh Physical Society, 2015.
- B. K. Roy, M. A. Chowdhury, D. M. Nuruzzaman, M. A. Kowser and M. M. Rahman, The Experimental study of erosive wear of Aluminium 6063 by Solid particle, International Conference on Mechanical, Industrial and Materials Engineering (ICMIME 2015).
|