Professor Dr. Md. Arefin Kowser

Professor, Department of ME, Dhaka University of Engineering & Technology, Gazipur

Ph.D. in Thermal Engg. (Saga, Japan), M.Sc. (BUET, Bangladesh), B.Sc. (DUET, Bangladesh).

Office Address: Room # 407, Old Academic Building

PABX: 49274034-53  Extn: 4039 (Off) & 4040 (Res)

Phone: 01754262832

E-mail: arefin@duet.ac.bd Send Email

Alternate:

E-mail: nadimduet at yahoo.com

Phone: (+88)  

Other:

Per. Site:

Scholar:

ResearchGate:

Linkedin:

Dr. Md. Arefin Kowser is working as a professor in the Department of Mechanical Engineering and heading the Department of Materials and Metallurgical Engineering in Dhaka University of Engineering & Technology (DUET), Gazipur. He joined the Department of Mechanical Engineering (ME), DUET in 2004. He completed B.Sc. in Mechanical Engineering from Dhaka University of Engineering & Technology (DUET), Gazipur. He achieved M. Sc. in Mechanical Engineering from Bangladesh University of Engineering and Technology (BUET) and Ph.D. in Mechanical Engineering from Saitama University, Japan. His main research focuses include strength of materials, material Fabrication, characterization of materials, stability of structures and interface fracture mechanics.

During his teaching profession, Professor Arefin has gathered work experience in various sectors in home and abroad. He is currently serving as a senior consultant under Consultancy Research and Testing Services (CRTS) in Mechanical Engineering Department, DUET to solve technical problems arises in industrial sector.

He has completed successfully different projects funded by University Grants Commission (UGC) related to Mechanical Engineering fields and completed one HEQEP project funded by World Bank through UGC, Bangladesh.

Degree University Year Discipline
Ph.D. Saitama University, Japan 2010 Strength of Materials & Interface Fracture Mechanics
M.Sc. Bangladesh University of Engineering and Technology 2006 Mechanical Engineering
B.Sc. Dhaka University of Engineering & Technology, Gazipur 2003 Mechanical Engineering
Undergraduate Courses
  • ME 2401: Engineering Mechanics,
  • ME 2403: Mechanics of Solids
  • ME 4507: Refrigeration & Air Conditioning
  • ME 4503: Heat & Mass Transfer
  • ME 4303: Machine Tools and Tool Engineering
  • ME 4505: Power Plant Engineering
  • ME 3501: Heat Transfer
  • ME 2703: Basic Mechanical Engineering
  • ME 2701:Engineering Materials
  • ME 2002: Computer Programming-I
  • ME 1004: Engineering Drawing-II
Post-Graduate Courses
  • Advanced Fracture Mechanics
  • Advanced Solid Mechanics
  • Advanced Properties of Materials
  • Advanced Mechanical Material System
  • Advanced Numerical Analysis
  • Finite Element Methods
  • Advanced Conduction & Radiation Heat Transfer
  • Solar Energy
  • Classical Thermodynamics
  • Thermal Environmental Engineering
Name Topic
Field of Specialization Interface Fracture Mechanics, Strength of Materials, Stability of Structures
Research Interest Interface Fracture Mechanics, Strength of Materials, Stability of Structures
Year & Duration Designation Scope of Works Company/Institute/University
08/03/2015 ~ Present Professor, Dept. of ME Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
15/04/2013 ~ 07/03/2015 Associate Professor, Dept. of ME Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
30/11/2006 ~ 18/01/2014 Assistant Professor, Dept. of ME Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Oct 2007 ~ Sep 2010 Research Fellow Research Saitama University, Japan
08/02/2004 ~ 29/11/2006 Lecturer, Dept. of ME Teaching and Research Dhaka University of Engineering & Technology (DUET), Gazipur
Year Organization Project Amount received
Jan 01,2019-Dec 31,2019 Dr. Md. Arefin Kowser (PI) Design and Development of Smart Vision and Guidance System for Blind People Using Low-Cost Approach. Funded by- office of DRE, DUET(under UGC). BDT: Tk. 2,00,000.00
Jan 01,2015-Dec 31,2015 Dr. Md. Arefin Kowser (PI) Design and Fabrication of a Leaf spring Testing Rig. Funded by- office of DRE, DUET(under UGC). BDT: Tk. 2,00,000.00
Dec 01, 2013-Nov 30, 2014 Dr. Md. Arefin Kowser (PI) Electricity Generation by Using Ocean Wave. Funded by- UGC. BDT: Tk. 2,00,000.00
Jan 01,2014-Dec 31,2014 Dr. Md. Arefin Kowser (PI) Design And Construction Of A High Capacity Pump Test Rig. Funded by- office of DRE, DUET(under UGC). BDT: Tk. 2,00,000.00
Jul 01, 2012 – June 30, 2014 Professor Md. Abdul Hannan Mia (SPM) and Dr. Md. Arefin Kowser (ASPM), E-Teaching Learning Facilities Development in the Department of Mechanical Engineering  at DUET, Gazipur. Funded by- UGC Bangladesh and HEQEP (World Bank). BDT: Tk. 3,20,00,000.00

(US$: USD 4,00,000.00)

Jan 01,2012-Dec 31,2012 Dr. Md. Arefin Kowser (Researcher) Fabrication of a Domestic Pump Test Rig. Funded by- office of DRE, DUET(under UGC). BDT: Tk. 2,00,000.00
Jan 01,2011-Dec 31,2011 Dr. Md. Arefin Kowser (Researcher) Development of an energy efficient high speed paddy dryer. Funded by- office of DRE, DUET(under UGC). BDT: Tk. 2,00,000.00
Jan 01,2010-Dec 31,2010 Dr. Md. Arefin Kowser (Researcher) Fabrication of continuous flow down draught rice husk Gasifier. Funded by- office of DRE, DUET(under UGC). BDT: Tk. 2,00,000.00
Type Title
Journal Publications
  • Zobaer Shah, Q.M., M.A Kowser & M.A Chowdhury, Investigation Of The Combined Effect Of Notch And Fretting On Bending FatigueTheoretical and Applied Mechanics, Volume: 47 issue: 1, page(s): 113-122 (2020).
  • Shuvho, Md & Chowdhury, Mohammad & Hossain, Nayem & Roy, Biplov Kumar & Kowser, Arefin & Islam, Azizul. (2020). Tribological study of Al-6063-based metal matrix embedded with SiC–Al2O3–TiO2 particles. SN Applied Sciences. 2. 10.1007/s42452-020-2064-1.
  • Zobaer Shah, Q.M., M.A Chowdhury & M.A Kowser , Fretting & friction induced fatigue failure: damage criterion of polytetrafluoroethylene, Heliyon, Volume: 6 issue: 6, page(s): 1-9 (2020).
  • M. Ruhul Amin, M.A Chowdhury & M.A Kowser, Characterization and performance analysis of composite bioplastics synthesized using titanium dioxide nanoparticles with corn starch, Heliyon Volume: 5 issue: 8(2019). https://doi.org/10.1016/j.heliyon.2019.e02009, 2019.
  • Zobaer Shah, Q.M., M.A Chowdhury & M.A Kowser, On the diversity in design for different bending fretting fatigue mechanism, M. SN Appl. Sci. (2019), Springer. 1: 1067. https://doi.org/10.1007/s42452-019-1107-y, 2019.
  • Zobaer Shah, Q.M., M.A Chowdhury, & M.A Kowser, Failure Mechanism of Polytetrafluoroethylene Under Friction Fatigue, M. J Failure Analysis and Prevention, Springer. https://doi.org/10.1007/s11668-019-00595-0, 2019.
  • MA Chowdhury, MA Kowser, Q.M. Zobaer Shah, Sumon Das, Characteristics and damage mechanisms of bending fretting fatigue of materials, International Journal of Damage Mechanics, Volume: 27 issue: 4, page(s): 453-487, DOI: 10.1177/1056789517693412, 2018.
  • MM Shahin, MA Chowdhury, MA Kowser, UK Debnath, MH Monir, Investigation of sustainability of lubricated journal bearing under relevant design parameters, Industrial Lubrication and Tribology, Vol. 70, Issue: 4, pp.789-804, https://doi.org/10.1108/ILT-02-2017-0039, 2018.
  • M A Kowser, Mohammad Asaduzzaman Chowdhury,   Quazi Md. Zobaer Shah, Effect of loading parameter on fretting fatigue by FEM, AIP Conference Proceedings: Vol 1851, No 1, doi: http://dx.doi.org/10.1063/1.4984727, USA, 2017.
  • Uttam Kumar Debnath, Mohammad Asaduzzaman Chowdhury, Md. Arefin Kowser,. Dewan Muhammad Nuruzzaman, Study of Erosion Characterization of carbon fiber Reinforced composite material,AIP Conference Proceedings: Vol 1851, No 1, doi: http://dx.doi.org/10.1063/1.4984727, USA, 2017.
  • MA Kowser, HMM Afroz, K Khalil, NML Huq, Environment Friendly Continuous Flow Gas Generation by Fluidized Bed Rice Husk and Saw Dust Gasifier, DUET Journal, Volume:3 issue: 1, 2017.
  • M. M. Rahman, M. A. Chowdhury, D. M. Nuruzzaman, U. K. Debnath, Md. Arefin Kowser and Biplov Kumar Roy, “Deposition rates on stainless steel substrates of different surface roughnesses under different operating conditions using thermal CVD”, International Journal of Surface Science and Engineering, Vol. 10, No. 3, 2016.
  • Md. Arefin Kowser, Muhammad Hurmutul Islam, Preparation of a Clamp Sleeve Spare Parts for Crimping Machine Using Low Carbon Steel Material by Heat Treatment Process, Procedia Engineering(Elsevier), Vol. 105, pp.769-775, 2015.
  • Md. Arefin Kowser,Md. Abdul Motalleb, Effect of Quenching Medium on Hardness of Carburized Low Carbon Steel for Manufacturing of Spindle Used in Spinning Mill, Procedia Engineering(Elsevier), Vol. 105, pp.814-820, 2015.
  • Dewan Muhammad Nuruzzaman, Mohammad Asaduzzaman Chowdhury, Md. Mostafizur Rahman, Md. Arefin Kowser and Biplov Kumar Roy, Experimental investigation on friction coefficient of composite materials sliding against SS 201 and SS 301 counterfaces, Procedia Engineering(Elsevier), Vol. 105, pp.858-864, 2015.
  • Uttam Kumar Debnath, Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Md. Mostafizur Rahman, Biplov Kumar Roy, Md. Arefin Kowser and Md. Monirul Islam “Erosion Characteristics of Teflon under Different Operating Conditions”, Journal of Polymer Engineering, Vol. 35, No. 3, 2015.
  • A. M. Ashraful, H. Afroz, M. A. Kowser, H. K. Rashedul and M. M. Rased, “Influence of ambient temperature and Door opening effects on the performance And energy consumption of a household Refrigerator-freezer”, JP Journal of Heat and Mass Transfer (Accepted), 2015.
  • Md. Arefin Kowser, Md.Tarequl Islam , Md.Giyas Uddin , Tapan Bihari Chakma, Md. Zahedur Rahman Chowdhury, Feasibility Study Of Ocean Wave Of The Bay Of Bengal To Generate Electricity As A Renewable Energy With A Proposed Design Of Energy Conversion System, International Journal of Renewable Energy Research (IJRER),Vol.4, No.2, pp.445-452, 2014.
  • Md. Arefin Kowser, Muhammad Hurmutul Islam, Improvement of Hardness of Low Carbon Steel Used for Clamp Sleeve Spare Part for Crimping Machine by Heat Treatment Process, International Journal of Fluid Mechanics and Machinery(IJFMM), Vol. 1, No. 2, pp.1-5, 2014.
  • Md. Arefin Kowser, Md. Mahiuddin, Determination of Constant Parameters of Copper As Power-Law Hardening Material at Different Test Conditions, Int. Journal of applied Mechanics and Engineering (De Gruyter), Vol. 19, No. 4, pp. 687-698, 2014.
  • Md. Arefin Kowser, Md. Mahiuddin, Technique for Determining the Constant Parameters of Power-Law Hardening Materials at Different Conditions, DUET Journal Vol. 2, No.1, pp. 1-8, 2014.
  • Mohammad A. Chowdhury, Dewan M. Nuruzzaman, Md. Arefin Kowser, Md. MostafizurRahman, Biplov K. Roy, Soma Chakraborty, Md. Didarul Islam, Md. Aktaruzzaman, Nurmohammad. , “Sliding Friction of Steel Combinations”, Open Journal of Mechanical Engineering. Vol. 8, pp. 364-369, 2014.
  • M. A. Awal Sheikh, Laek Sazzad Andallah and Md. Arefin Kowser, A Comparative Study of Finite Difference Scheme for Burger’s Equation, Gazi University Journal of Science, Vol. 27, No. 4, pp.1045-1052, 2014.
  • Mohammad Asaduzzaman Chowdhury, Dewan Muhammad Nuruzzaman, Md. Arefin Kowser, Mostafizur Rahman, Biplov Kumar Roy, Soma Chakraborty, Sagir Hossen, Imam Uddin and Selim Hossain, Frictional Behavior of Polymers Sliding Against Smooth and Rough Mild Steel Counter Faces, Middle-East Journal of Scientific Research, Vol. 21, pp. 477-486, 2014.
  • Md. Arefin Kowser, Yoshio ARAI, Wakako ARAKI, Asymptotic Analysis for the Singular Stress Behaviour around an Interface Edge of Dissimilar Power-law Hardening Materials Joint, Fracture and Strength of Solids VII, Key Engineering Materials (KEM) Journal, Vol. 462-463, pp. 1290-1295, 2011.
  • Md. Arefin Kowser, Yoshio ARAI, Wakako ARAKI, An Iteration Method For Singular Fields around An Interface Edge of Elastic/Power-Law Hardening Materials Joint, Journal of Solid Mechanics and Materials Engineering, Vol. 4, No. 7, pp. 1040-1050, 2010
  • M. Ashiqur Rahman, Md. Arefin Kowser, Inelastic Deformations of Cantilever Stainless Steel Beams of Variable Cross-Section- Experiment And Nonlinear Analysis, An International Journal of Theoretical and Applied Mechanics AIMETA(Springer), Vol. 45, No. 4, pp. 503-518 , 2010.
  • M. Ashiqur Rahman, Md. Arefin Kowser, Md. Tareq Siddiqui, Effect of End-Shortening on the Response of a Steel Cantilever Beam with an Opening, Int. Journal of applied Mechanics and Engineering, Vol. 13, No. 3, pp. 735-751, 2008.
  • M. Ashiqur Rahman, Md. Arefin Kowser, Nonlinear Analysis of the Cantilever Shape Memory Alloy Beams of Variable Cross-Section, J.Smart Materials and Structures,Vol.16, No.2, pp.531-540, 2007.
  • M. Ashiqur Rahman, Md. Tareq Siddiqui, Md. Arefin Kowser, Design And Nonlinear Analysis of a Parabolic Leaf Spring, IEB Journal of Mechanical Engineering, Bangladesh. Vol. ME 37, pp. 47-51, 2007.
  • M. Ashiqur Rahman, Md. Arefin Kowser, S. M. Moshiul Hossain, Large Deflection of the Cantilever Steel Beams of Uniform Strength- Experiment and Nonlinear Analysis, Int.J.Theoretical and applied Mechanics, Vol.1, No.1, pp.21-36, 2006.

 

Conference Proceedings
  • Md. Arefin Kowser, Dr. Mohammad Asaduzzaman Chowdhury, Dinakar Das, Comparative study of different materials under fatigue load at different test conditions, 1st International Conference on Engineering Research and Practice (ICERP 2016), University of Dhaka, Dhaka, Bangladesh, February 04-05, 2017.
  • Md. Arefin Kowser, Md. Alim adsha, Nayeem Md. Lutful Huq, Md. Khaled Khalil, Hasan Mohammad Mostofa Afroz, Zulfikar Hossain, Fabrication and Performance Test of Continuous Flow down Draught Gasifier for Wood Gasification System, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Md. Arefin Kowser, Dr. Mohammad Asaduzzaman Chowdhury, Md. Shafi ul Islam, Md. Sohel  Rana, Md. Masud Parves Robel, Design And Analysis of Shock Absorber Using FEA Tool, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Md. Arefin Kowser, Al Mamun Ar Rashid, Md. Akram Hossen, Md. Khairul Islam, Numerical Analysis on Aerodynamic Shape of Truck To Reduce Drag, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Md. Arefin Kowser, Dr. Mohammad Asaduzzaman Chowdhury,   Quazi Md. Zobaer Shah, Effect of loading parameter on fretting fatigue by FEM, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Uttam Kumar Debnath, Dr. Mohammad Asaduzzaman Chowdhury,Md. Arefin Kowser, Dr. Dewan Muhammad Nuruzzaman, Study of Erosion Characterization of carbon fiber Reinforced composite material, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Mohammad Abdul Hye, Dr. Mohammad Asaduzzaman Chowdhury, Md. Arefin Kowser, Mechanical and Structural Analysis of TMT High Strength Steel Bar, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.Md. Mahiuddin, Md. Arefin Kowser, Investigation of Stress State Near the Crack Tip of Central Cracks of Copper by Numerical Analysis, 6th BSME International Conference on Thermal Engineering (ICTE 2014), IUT, Dhaka, Bangladesh, December 19-21, 2014.
  • Md. Arefin Kowser, Md. Omar Faroque Sarker, Md. Khaled Khalil, Enhancement of Heat Transfer by Using Different Types of Fin at Constant Temperature and at Constant Heat Flux, 6th BSME International Conference on Thermal Engineering (ICTE 2014), IUT, Dhaka, Bangladesh, December 19-21, 2014.
  • Md. Arefin Kowser, Muhammad Hurmutul Islam, Preparation of a Clamp Sleeve Spare Parts for Crimping Machine Using Low Carbon Steel Material by Heat Treatment Process, 6th BSME International Conference on Thermal Engineering (ICTE 2014), IUT, Dhaka, Bangladesh, December 19-21, 2014.
  • Md. Arefin Kowser,Md. Abdul Motalleb, Effect of Quenching Medium on Hardness of Carburized Low Carbon Steel for Manufacturing of Spindle Used in Spinning Mill, 6th BSME International Conference on Thermal Engineering (ICTE 2014), IUT, Dhaka, Bangladesh, December 19-21, 2014.
  • Md. Arefin Kowser, Md.Tarequl Islam, Md. Giyas Uddin , Tapan Bihari Chakma, Design and Fabrication of a Proposed Ocean Wave Energy Conversion System with the Analysis of Structural Stability, 6th BSME International Conference on Thermal Engineering (ICTE 2014), IUT, Dhaka, Bangladesh, December 19-21, 2014.
  • Md. Arefin Kowser, Md.Tarequl Islam , Md.Giyas Uddin , Tapan Bihari Chakma, Md. Zahedur Rahman Chowdhury, Feasibility Study Of Ocean Wave Of The Bay Of Bengal To Generate Electricity As A Renewable Energy With A Proposed Design Of Energy Conversion System, International Conference on Physics for Energy and Environment, Atomic Energy Centre, Dhaka, Bangladesh, March 06-08, 2014.
  • Md. Arefin Kowser, Md.Tarequl Islam, Mohammad Asaduzzaman Chowdhury, Md. Giyas Uddin , Tapan Bihari Chakma, Md. Zahedur Rahman Chowdhury, Performance Measurement of a Newly Proposed Ocean Wave Energy Conversion System, International Conference on Environmental Aspects of Bangladesh (ICEAB 2014), University of Dhaka, Dhaka, Bangladesh, September 06-07, 2014.
  • Arefin Kowser, Muhammad Hurmutul Islam, Improvement of Hardness of Low Carbon Steel Used for Clamp Sleeve Spare Part for Crimping Machine by Heat Treatment Process, International Conference On Advances in Civil, Structural and Mechanical Engineering – ACSME 2014, Bangkok, Thailand, January 04-05, 2014, ISBN: 978-981-07-8859-9 DOI:10.3850/978-981-07-8859-9_36, pp. 44-48, 2014.
  • Md. Arefin Kowser, Md. Mahiuddin, Technique For Determining the Constant Parameters of Cu as a Power-Law Hardening Material at Different Conditions, International Conference on Engineering Research, Innovation & Education2013 (ICERIE2013), SUST, Sylhet, Bangladesh, January 11-13, 2013.
  • Md. Arefin Kowser, Md. Mahiuddin, A Technique for determining the Near-tip fields of a crack in a Power- law Hardening Material Using Asymptotic Analysis, International Conference on Mechanical, Industrial and Material Engineering (ICMIME2013), RUET, Rajshahi, Bangladesh, November 01-03, 2013.
  • Md. Arefin Kowser, Md. Mahiuddin, Technique For Determining the Constant Parameters of Power-Law Hardening Material by Tensile Test, 6 International Mechanical Engineering Conference and 14 Annual Paper Meet, IEB, Dhaka, Bangladesh, September 28-29, 2012.
  • Md. Arefin Kowser, Nayeem Md. Lutful Huq, Hasan Mohammad Mostofa Afroz, Fabrication of continuous flow down draught rice husk gasifier, 5th BSME International Conference on Thermal Engineering, Dhaka, Bangladesh, December 21-23, 2012.
  • Md. Arefin Kowser, Yoshio ARAI, Wakako ARAKI, Asymptotic Analysis for the Singular Stress Behaviour around an Interface Edge of Dissimilar Power-law Hardening Materials Joint, Eight International Conference on Fracture and Strength of Solids (FEOFS), KualaLumpur, Malaysia, June 07-09, 2010.
  • Md. Arefin Kowser, Yoshio ARAI, Wakako ARAKI, An Iteration Method For Singular Fields around An Interface Edge of Elastic/Power-Law Hardening Materials Joint, Asian Pacific Conference for Materials and Mechanics 2009 (APCMM2009), Pacifico Yokohama, Japan, November 13-16, 2009.
BOOK/BOOK CHAPTER
  • Arefin Kowser (2010), “Superelastic Shape Memory Alloy Cantilever Beam of Variable X-Section: Nonlinear Theory, Numerical and Experimental Analysis for Smart Materials and Structures”, Lambert Academic Publishing (LAP), Germany, ISBN 978-3-8383-8159-6. (Book)
Topic Info
Supervisions
  • Philosophical Doctorate (Ph.D): 02 (Continuing)
  • Post-Graduate Supervision (Completed): 7 (M.Sc.), 2 (M.Engg.)
  • Undergraduate Supervision: 40 (Aprox.)
Honours and Awards
  • University Gold Medal for Outstanding Academic Performance, DUET, 2003
Fellowship & Membership
  • Fellowship of Academic bodies and professional Societies:
    Institute of Engineers, Bangladesh (IEB): 20019-Present (F/11978)
  • Institute of Engineers, Bangladesh (IEB): 2003-2019
    Membership of Scientific and Professional Societies:
List of Conferences, Short-term Course etc. organized/participated in the past five years
  • Md. Arefin Kowser, Dr. Mohammad Asaduzzaman Chowdhury, Dinakar Das, Comparative study of different materials under fatigue load at different test conditions, 1st International Conference on Engineering Research and Practice (ICERP 2016), University of Dhaka, Dhaka, Bangladesh, February 04-05, 2017.
  • Md. Arefin Kowser, Md. Alim adsha, Nayeem Md. Lutful Huq, Md. Khaled Khalil, Hasan Mohammad Mostofa Afroz, Zulfikar Hossain, Fabrication and Performance Test of Continuous Flow down Draught Gasifier for Wood Gasification System, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Md. Arefin Kowser, Dr. Mohammad Asaduzzaman Chowdhury, Md. Shafi ul Islam, Md. Sohel Rana, Md. Masud Parves Robel, Design And Analysis of Shock Absorber Using FEA Tool, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Md. Arefin Kowser, Al Mamun Ar Rashid, Md. Akram Hossen, Md. Khairul Islam, Numerical Analysis on Aerodynamic Shape of Truck To Reduce Drag, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Md. Arefin Kowser, Dr. Mohammad Asaduzzaman Chowdhury, Quazi Md. Zobaer Shah, Effect of loading parameter on fretting fatigue by FEM, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
  • Uttam Kumar Debnath, Dr. Mohammad Asaduzzaman Chowdhury,Md. Arefin Kowser, Dr. Dewan Muhammad Nuruzzaman, Study of Erosion Characterization of carbon fiber Reinforced composite material, 7th BSME International Conference on Thermal Engineering (ICTE 2016), BUET, Dhaka, Bangladesh, December 22-24, 2016.
Reviewer, Co-Chair
  • Reviewer: International Journal of Renewable Energy Research
  • Co-chair: BSMEICTE-2014, IUT, Bangladesh.